Pro 2 & DL231 Update caused connection issue

2020-09-25

I have a Pro 2/DL231 issue.


The system setup is: FoH Pro2 and a monitor Pro 2. The FoH P2 is connected to the AES50 A X port and the Monitor board is connected via the AES50 B X port.


The Problem: I just did a firmware update on the entire system and it all updated without a problem. However, the monitor board is having issues with the DLs. Please see the attached picture.  It is still passing audio even with this issue but the red status light is keeping me up at night knowing this system has to be used in two days...  


Maybe the firmware changed some DL Settings? 


Thanks!