Statistics

253,889 members
131,494 posts
  • New
    Vivian99
    Newcomer - Level 1
    2021-10-19

    Hi, I am very new to recording. Recently I got myself a behringer xenyx q802usb and when come to setup, I got a few issues.

     

    • Hissing sound during playback

    When I playback the record, there a hissing sound all over on the sound. I tried noise reduction in the app but still there's a hissing sound is too loud and it effects the sound I want.

    I lowered the microphone levels and it's seem worked a little but there's still a lots of others hissing sound like electricity and it's effected the sound I want. (No hissing sound heard when recording)

    Any suggestions how to fix it? (I have confirmed it is not surrounding noise)

    • Outputs

    When I play songs or YouTube through the mixer, I noticed that I could only hear the background songs. The vocal and human sound are extremely small or totally missing. I put up the gain, it works a little but at the same time the noise are also been turn up.(Checked the connecting cables, not the issue)

    read more...
    0 1
  • New
    Phlex
    Newcomer - Level 1
    2021-10-19

    I an currently using my X32 Rack and SD16 for FOH mixer and I want to utilize my x32Compact to run my stage monitors- Is there a video out there that can guide me to do this-  Thank You

    0 0
  • New
    nharkins15
    Newcomer - Level 1
    2021-10-18

    We run tracks out of an ipad, and have been smooth sailing for 6 months. Last weeks suddenly our ipad isn't recognizing the output o the Behringer U-Phoria UMC 1820. I've tried different cables to see if that's the issue. Anyone have any suggestions? 

    read more...
    0 1
  • New
    zsoundguy
    Newcomer - Level 1
    2021-10-18

    Try to keep it short.  I'm a network engineer helping out our church.  They are getting wifi interference with the xr18 in local access point mode on the 2.4 GHz network.  trying to get the xr18 to join a wired network via dhcp  and then connect to the ipads on that using a better access point.  But I cannot get the xr18 to even present a mac address on a switch reliably.  It works about 25 percent of the time.  It is not the cabling or switch.   

     

    In network settings you can click on DHCP but it really does not present any usable settings?   Just is all zeros.....  I've also tried setting a static IP and it does not seem to save either.  I'm running 1.18 firmware.  The issue seems to be that I can never get a mac address from the xr18 to the switch gear reliably.  I'm setting speed and duplex to 100 full

     

     

    Thanks for your help!

     

    Jason

    read more...
    0 1
  • New
    Emorgadoj
    Newcomer - Level 1
    2021-10-15

    Can I get any replacement for this sub?

     

    0 0
    • Emorgadoj
      KyleJohnson Hello, Kyle here with Music Tribe. For spare parts inquiries please click on Support and then Spare Parts to submit a ticket.
      • Oct 17
  • New
    JackGibson
    Newcomer - Level 1
    2021-10-15

    I am an indoor city of this company. And no one will answer my emails. I want off the website! How come I can't get one person to answer me at this company? Yet you use my image freely?? We had a deal. And when the company sold I never heard from anyone again. You stopped dealing with me. NOW TAKE ME OFF THE WEBSITE!!

    read more...
    0 4
    • JackGibson
      JackGibson I am an endorsee of this company and nobody will answer my 50 emails!! Does ANYONE work here??
      • Oct 15
    • JackGibson
      KyleJohnson Hello, Kyle here with Music Tribe. It's possible that an email address you have been emailing is no longer active. Could I ask you to please submit a ticket through the Support>Presales portal so that we can address this issue for you?
      • Oct 17
    • JackGibson
      JackGibson

      Look. I’ve sent emails to everyone. I have tone prints. I have videos on your site. My picture is on the endorsee list. I signed autographs at the booth at NAMM. You guys should know who I am. It’s embarrassing that I had to come on the public forum to even get an answer. You aren’t answering anyone. Don’t be disingenuous now. You’ve had years to reach out to me. Since the company sold I haven’t been contacted? Much less answered dozens of emails. To the right addresses. The one that was given me! I am Jack Gibson from the band Exodus. Either reach out to me and make it right, or take me off all your media. Videos and tone prints.

      • Oct 17
      • I am an ‘endorsee’ of this ‘company’ I am on the damm website and NOBODY WILL TALK TO ME!!! I want my picture and name OFF!! You can’t answer my 50 emails? Then take my damm picture off the website!!! What kind of operation are you running??
        KyleJohnson Hi Jack, thank you. I've sent you a private message here on Community. Please take a look.
        • Oct 17
  • New
    darylmount
    Newcomer - Level 1
    2021-10-14

    Can I play mp3s or videos from my laptop directly to the MR18 via wifi, or do I have to have a hardwire connection to the mixer?

    0 3
    • darylmount
      RexBeckett Hi darylmount, the network connection (Wifi or wired) does not support audio transfer. You will need to use the USB connection or analogue cables to play music from the laptop to the MR18.
      • Oct 15
  • New
    JosephGiannini
    Newcomer - Level 1
    2021-10-14

    combineing two mixer one powered and one passive  to gain more channels using speaker on both will i hear sound from both mixers or  which one has to be the main to get both mixer speakers working I am useing powered PMP580s and one passive XENYX 1622fx 

    read more...
    1 4
    • JosephGiannini
      RexBeckett Hi Joseph, the PMP580S will need to be the main mixer. Feed the Main LR outputs from the 1622FX into one of the stereo channel inputs of the PMP580S (7/8 or 9/10).
      • Oct 15
  • New
    Stallion
    Newcomer - Level 1
    2021-10-14

    Hello,

    Please i need help on how to connect an FBQ2496 to a mixer, and how to set up the feedback destroyer to minimize feedbacks and noise in a live setup

    My current set up is this

    Mixer>equalizer>FBQ2496>crossover>amp>speakers

    read more...
    0 2
    • Stallion
      RobbyWingfield Hi Stallion, this is Robby with Music Tribe. In the configuration you listed, you would connect the outputs of your EQ to the inputs of your FBQ2496, and the outputs of the FBQ2496 to the inputs of your crossover. The easiest mode to use your unit in is in "Auto-Learn Mode" the process for setting this up is listed on page 6 of the manual linked here: https://mediadl.musictribe.com/media/sys_master/hfd/h36/8850150359070.pdf

      If you require more individual attention, please submit a support case at the link above. Thanks!
      • Oct 14
  • New
    DanielCarrier
    Newcomer - Level 1
    2021-10-14

    Hi,

     

    I'm running firmware V2.3 and notice that as input, I now see automatic.

     

    I was in impression that this will allow to receive signal from either Analog and Ultranet but it is not working.

     

    Does my understanding was accurate or input is only one type at the time?

     

    We have 2 differents consoles; One Digital using Ultranet and the second one is Analog using XLR 1.

     

    We have to change input type depending with console we used and I would like to avoid this.

     

    Any suggestion?

     

    Thank you

    read more...
    0 4
    • DanielCarrier
      ChrisEdwards1 Hi DanielCarrier, the Auto function is designed to automatically switch the input source to analogue if no ultranet source is connected to the input.
      • Oct 13
Go to page