Statistics

253,555 members
131,122 posts
  • New
    mapex555
    Newcomer - Level 1
    2021-09-04

    How would I go about connecting a Mdx4600 to a Xynex802-Usb

    0 11
    • mapex555
      Nigel67 The MDX4600 has line-level inputs and outputs. It would normally be connected to channel insert points on an analogue mixing console. The MDX460 is intended to be used as inserted or send/return effects on analogue mixing desks. The Xenyx 802 does not have insert points. It is possible that they could be used as pre-processors for the 802 inputs but this would depend on the signal sources, i.e it cannot be used if the signal is mic level. The only was you could use it would be to send to it from the fx send and return into another input, but you will need to make sure that the input channel that the microphone input is not sent to the mix as you will have delay issues with the audio coming back from the MDX4600. It may be better to record the tracks dry and then add the effects in your DAW software during mixing.
      • Sep 4
      • Mdx4600 to Xynex802
        mapex555 Thank you for replying. I’m very new to this. What would count as mic level sources/signals?
        • Sep 5
      • Mdx4600 to Xynex802
        Nigel67 Any signal that comes out of a microphone is mic level unless it has a built in pre amp but there aren't that many. A cd player is line level or the audio that comes out of your phone headphone jack. You would use an MDX4600 on a microphone but only when you have increased the microphone gain to a line level signal using the mic amp gain. There are some videos on You Tube that show how to connect a MDX4600 to a mixer using insert points.
        • Sep 5
  • New
    NagibAcrio
    Newcomer - Level 1
    2021-09-04

    Hello my friends,

    I need to control my Midas mr18 by internet, is it possible?

    I thought in enter at my wi-fi network by vpn and control my mixer using my ipad by internet.

    What do you think about it?

    is it possible?

    read more...
    0 11
    • NagibAcrio
      Nigel67 Hi NagibAcrio. Although its not something that we would be able to support you with, I see no reason why you would not be able to control the MR18 using a VPN connection. I have not heard of anyone setting up an MR18, but I have spoken to users who have been successful controlling their M32 mixers from remote locations.
      • Sep 5
    • NagibAcrio
      NagibAcrio

      Thanks Nigel, If you can connect me with some of this people that got it this, I appreciate.

      • Sep 6
  • New
    SergioBarreraOro
    Newcomer - Level 1
    2021-09-03

    I have a serious problem when i try to use the fcb1010 to send midinotes. I've configured it exactly as the manual says and double checked with other forum posts which said the same. But when i press the configured key, instead of sending the note one time it starts sending it a billion times per second and does not stop until the device is turned off. Any idea what could be causing this or how to fix it? thanks in advance.

    read more...
    0 8
    • SergioBarreraOro
      RobbyWingfield Hi Sergio, this is Robby with Music Tribe. Please try resetting your factory defaults and see if the behavior persists. If it does please submit a support case at the link above. A video of your programming the unit and displaying the behavior would be helpful. Thanks!
      • Sep 18
  • New
    BryanB2
    Newcomer - Level 1
    2021-09-03

    I just recieved the Ditto + and upgraded the firmware right away.

    When I press record in either regular or extended mode, the volume increases quite a bit. The playback volume is also increased.
    The pedal was working normally one day and the next, it started with this unusual volume increase when I hit record and play.
    I reinstalled the firmware but that made no difference. 

    Is there something I can adjust or is the pedal broken? 

    Note: The volume knob doesn't change the record level. 

    read more...
    0 32
    • BryanB2
      ChrisEdwards1 Hi BryanB2, would it be possible to provide some further information on your setup such as if any other pedals are being used, how the device is being powered, and how you are connecting it to your amp?
      • Sep 5
  • New
    JosephScottVanWye
    Newcomer - Level 1
    2021-09-02

    I'm trying to find out what products I have registered 

     

    0 6
    • JosephScottVanWye
      ChrisEdwards1 Hi JosephScottVanWye, it is currently not possible to view your registered products within the Community Portal, however, upon registration, an email would have been provided confirming the registration along with the product details. I will also send you a PM shortly with some extra information on what you currently have registered.
      • Sep 3
  • New
    Rocktambuls
    Newcomer - Level 1
    2021-09-02

    Hi 

     

    I have a rack with Iem sistem and a x32rack to run it. As monitoring. We are going to self control via smartphone

    The 8 xlr outputs of the x32 rack is connect to 8xIEMs.

    Our band spend 26 channels connected to DL32. 

    Also we have a M32 for FOH

    Well I need to know how I need to connect and routing to have gain channel control on FoH. Trim gain in X32rack. 

    I want a pre fader send to x32rack. 

     

    Is this correct? 

     

    Aes50a from dl32 to aes50a of M32

    Aes50b from M32 to aes50a off x32rack

    M32 internal clock

    X32rack aes50a clock

    M32:

    Input routing (home)from aes50a 1-8....25-32

    Aes50a out9-16 ( for main LR on 15&16 to Pa on Dl32) 

    Aes50b out 1-4 & 5-8

     

    X32rack

    Xlr out  --> local 1-4 and local 5-8????? 

    And router WiFi on x32rack to control all? Is it correct? 

     

     

     

    read more...
    0 8
    • Rocktambuls
      Nigel67 Hi Rocktambuls. There are a couple of things that I am not quite sure about in your description. You mention that you want a pre fader send to the X32 Rack which I am guessing is the 26 inputs so that you can mix them for the IEMs. In you set up description, you do not mention sending the inputs from the M32 to the Rack, but you do mention AES50B Out 1-4 and 5-8. What audio signals are you hoping to send from the M32 to the X32 Rack? If it is just the inputs (post mic amp, pre everything else, then you would assign AES50A Inputs 1-32 directly to AES50B Outputs 1-32 on the M32 and then assign AES50A Inputs 1-32 on the rack to the channel inputs. Unfortunately, there is only 1 mic pre amp per channel, so you would set these up with the M32, and then any make up gain would be controlled on the two mixers using the digital trim. This way, you would still have some kind of independent gain control on both mixers. You would use the HA Split function for this, so the analogue gains would only be controlled on the M32 via the LCD display and the main Gain pot on the surface of the M32 would be a digital trim. This is described in the manual.

      The clocking set up you have mentioned is correct.

      The Out 9-16 from the X32 Rack is the only unknown as I am not sure where you are mixing this audio, in the X32Rack or from the 8 outputs on the M32. I need some more information on this please. If it is the X32, then you would assign the 8 outputs to the Local 1-8, or if it is the 8 outputs being sent over the AES50, then you would assign the AES50 directly to the Local outputs, but this needs more clarity.
      • Sep 5
  • New
    psapenaro
    Newcomer - Level 2
    2021-09-01

    I need tech support for anXR18. I think mine just went bad. Is there a way to call?

     

    0 7
  • New
    wrzkace13
    Newcomer - Level 1
    2021-08-31

    i'm getting effects through my monitors out but when I record to my DAW  logic X for Mac the Reverb compression and gate are not being recorded the sound is not being recorded 

    0 6
  • New
    cheadcase915
    Newcomer - Level 1
    2021-08-30

    If anyone can point me in the right direction, Im hoping it is you guys. In April I set up an in ear monitoring/ recording unit for my band's live performance. Im running an xr18 mixer into a windows 10 laptop ( I've tried 2 different ones) Im using reaper to send backing tracks and a click and using audio inputs 1-12 for the live instruments and midi from the drums. And recording those usb sends into reaper. However 2 weeks ago I can no longer do that cuz when I hit record, reaper freezes 9 sec in and goes into not responding. I have disarmed each of the 12 recording tracks down to 1 midi track and 1 L&R stereo track. That is all that will record without freezing... Any ideas?

    read more...
    0 24
    • cheadcase915
      Nigel67 Hi cheadcase915. There should be no issues with our ASIO driver and Windows 10. This sounds like a buffer size or hard drive / RAM issue. Have you tried changing the buffer size to see if that makes a difference? There is no reason why one day it will work and next it will not if no settings have been changed. Have you downloaded the latest ASIO driver and are you running the latest version of Reaper? Have you uninstalled and then re-installed the ASIO driver? or even Reaper? What other external equipment do you have plugged in? Have you upgraded the monitor recently to a high resolution one? I am afraid that its going to be trial and error to identify what is causing the issue. Were you using both computers before this issue started happening, or did you bring in the second computer only when the issue started happening?
      • Aug 31
  • New
    wrzkace13
    Newcomer - Level 1
    2021-08-29

    I updated my I pad but my I Mac still says version 1.5 though I updated it

    0 18
Go to page