Statistics

227,810 members
102,596 posts
  • New
    TomFenner
    Contributor - Level 1
    2021-05-07

    Can't get any output on headphone jack!

    0 0
  • New
    GlenMorrison
    Newcomer - Level 1
    2021-05-03

    Is there a way to defeat the APO function so that the amp stays on all the time and does not require a threshold audio signal to turn it on?

    0 12
    • GlenMorrison
      Nigel67 Hi Glen. Can you tell me which model of E-Series that you have and serial number(s). Until I have those, I cannot give you a definitive answer as it may come down to what version of the amp you have. Many thanks
      • Tue at 2:49 AM
  • New
    Rocky195
    Newcomer - Level 1
    2021-04-26

    Hi

    havin problems connecting Deepmind 6 thru my audio interface behringer umc 204 into my computer 

     Windows 10/64 recording in Studio one 5 Artist version. 
    I am using the two 1/4" out l/r from Deepmind into umc fron 1/4 inputs. Also using Midi out of Deepmind into umc input midi. 
    umc is connected thru usb into my computer.

    not sure if my problem is the configuration in Studio one but I can't record on the instrument track.

     

    read more...
    0 4
    • Rocky195
      DavidKnighton Hello Rocky195,
      I would suggest connecting the UMC to your computer and just run audio from iTunes or YouTube out to a pair of speakers or headphones. This will determine if the unit is working properly. Also, with Windows, you need to make sure you have the driver installed. If it's a setup problem with your DAW, make sure the UMC is the preferred Input/Output interface. Your individual tracks need to be sourced from the UMC inputs and record armed before you hit the RECORD button. Hope this helps to uncover the issue.
      • Apr 29
  • New
    argentino40
    Newcomer - Level 1
    2021-04-25

    Evidentemente tengo un problema con Windows, no sé cómo lograr que la App reconozca la interface de mi xr18.... conocté el USB pero no aparece en el listado de interface y a partir de ahi no puedo avanzar.

    GRACIAS POR SU AYUDA. ADJUNTO IMAGEN

    read more...
    0 6
    • argentino40
      Nigel67 Is the XR18 showing up as a audio device in your Bluetooth and other devices in Windows 10? If it is, also check the Sound settings, both recording and playback to see if the XR18 is showing up there. Play some audio from the XR18 to the computer and the bargraph on the recording page should light up indicating that audio is reaching the computer. If it does, then the issue is more than likely going to be with your DAW. I would suggest trying to uninstall and then re-install it. I have attached a jpeg showing the set up of the XR18 for Windows 10.
      • Apr 25
  • New
    pigro
    Contributor - Level 1
    2021-03-24

    Hi,

     

    cab somebody halp me , |I am looking for tye drivers for the behringer umx 49. on the site from behringer there are no working links

    0 20
    • pigro
      ChrisEdwards1 Hi pigro, the UMX 49 uses the ASIO4ALL driver. A link for this can be found on the product page via our website and alternatively can be download directly from their website. Please see the link below:

      https://www.asio4all.org/
      • Mar 25
  • New
    AchimOpp
    Newcomer - Level 1
    2021-03-16

    Hello TC Support,

     

    I just purchased the new TC 6000 native bundle, registered succesfully but the mentioned link for downloading the software is wrong...

    please send me the correct link

    thank you and best regards

     

    Achim Oppermann

    read more...
    0 19
  • New
    Jev
    Contributor - Level 1
    2021-03-13

    I´ve updated my x touch to 1.21 and now i cant get out of the update mode 

     

    how can i fix this?

     

    and i want to integrate after in ableton 11 as daw controller sombody got a good discription already written or a good yt video? i already had looked for it but did not found a good discription

     

    thx 

    lg Jev

    read more...
    0 14
  • New
    JOMAR07
    Newcomer - Level 1
    2021-03-12

    Hi, team

    I have bought the UMC204HD and installed the last driver, v. 5, but when connect the audio interface to my PC, Windows not recognized the device.

    Can anyone help me?

    0 23
    • JOMAR07
      RexBeckett Hi JOMAR07, try a different USB cable and/or different USB port on your PC. Use a USB 2.0 port if possible as some USB 3.x ports can cause problems.

      Open Windows Control Panel -> Device Manager and see if the interface is shown with an error flag. If so, uninstall it, disconnect the USB cable, reboot the PC and then reconnect the USB cable.
      • Mar 12
  • New
    Shawnkueb
    Newcomer - Level 1
    2021-03-05

    Hey has anyone ever heard of a way to hook up MyDmx 3.0 to an Elgato stream Deck 

    0 20
  • New
    michelmanget
    Newcomer - Level 1
    2021-03-05

    hi I woul like to know if I can connect my Technics Turntable to an audio interface Behringer U-PHORIA UMC22 ?

    Thanks

    0 27
    • michelmanget
      RexBeckett Hi Michel, the UMC22 interface does not include a phono preamp/equalizer. It is also designed for one mic and one line/instrument input so is not the best for stereo sources.

      If your turntable does not have a built-in phono preamp, you could use a phono/USB interface e.g. UFO202. Alternatively if you have a good phono preamp, you could use a stereo/USB interface e.g. UMC202HD.
      • Mar 5
Go to page