Statistics

294,385 members
177,480 posts
  • Joshguminski
    Contributor - Level 1
    2020-05-14

    I am running 2 12in Dayton ho's in a sealed enclosure. I don't have access to a PC. Can you recommend a setting for my amp to give me the best sound?

     

    0 84
  • Dreamstone
    Contributor - Level 1
    2020-05-12

    Hello,

    I recently bought the Behringer UM204 to connect my guitar. And it works great!
    Besides that, the interface is placed on my Home Theater PC and connected to my Denon AVR via TS (Behringer's main Outputs) to RCA cable like down below to listen to FLAC music.

    Is this connection right? or should I use the Monitor outputs on the back of Behringer?

    I am asking this because the AVR is not working till last night, And the usual suspect looks like UM204.indir (1).jpg

    Best regards,

     

     

     
    read more...
    0 109
    • Dreamstone
      RexBeckett

      @Dreamstone 


      Hello Sadas, welcome to the community.


       


      You could connect to the Playback RCA outputs but they are uncontrolled feeds from USB playback. The Main Out signal is controlled by the Mix and Main Out knobs so is more useful if you want to hear a mix of playback and your guitar input.

      • May 12, 2020
    • Dreamstone
      Dreamstone

      @RexBeckett 


      Thanks for your warm welcome.


      I do want to use the Main outputs of the UMC204 that's why I bought the cable on the picture. I am not a sound device expert, actually, it is my first audio interface that I have.


      My question is, is it ok to use TS to RCA cable on TRS output? It looks like working but TS cable shorts the R and S pins of the output. 


       

      • May 13, 2020
  • AudioEden
    Contributor - Level 1
    2020-04-29

    6 weeks ago i created a service ticket for a warranty replacement part for an $8000 pair of malfunctioning (4 day old) Tannoys, and all i got was INCOMPETENCE and DISREGARD. Then, just recently, Music Tribe closed my service ticket, labelling it "inactive customer".  Basically, they blame ME for not doing anything for me.

    HOW you like THAT !

    read more...
    0 165
    • AudioEden
      ChrisEdwards1

      Hi @arthurcth,


      Hope you are well. 


      I am sorry to hear about the issues you have encountered, if possible would you be able to send me a message with your case number and I can take a look into this for you?


      Christopher Edwards


      Customer Solutions Lifestyle Specialist.

      • April 28, 2020
    • AudioEden
      Jeffreyford

      Hello @aurthercth,
      It was great speaking with you yesterday.
      Thank you for your candor concerning your Prestige GR Stirling.

      • April 30, 2020
    • AudioEden
      clif

      Dont feel "special", I recently posted 5 service tickets and within days they were marked by the tribe as "resolved" .  In truth, after many weeks of begging and pleading with the so called Behringer support team (which had no relationship to Behringer at all I found out ), I did get a schematic diagram for the unit I was trying to get fixed.


      Bottom line, this Tribe thing is not all that its cracked up to be in my opinion.  I will probably come here as a last resort for future issues.

      • May 12, 2020
  • alphabravo676
    Contributor - Level 2
    2020-04-24

    Hey All,

    I recently posted about a humming noise on my Q502USB+AT2020 setup. I managed to fix the humming noise, however, now there is a constant static. I have tried plugging the mixer into different plugs, as well as unplugging the XLR (to confirm it isnt the mic). I haven't been able to stop the hissing/static whatsoever so far. Is there any way to fix this? There is a link below to download an mp3 to hear what the noise sounds like.

    https://s3-ap-northeast-1.amazonaws.com/poodll-audioprocessing-out/CP/30/localhostuser/recordmp3online.com/poodll/poodllfile5ea3ddbc36bb91.mp3

    Thanks

    read more...
    0 101
  • BENOYM123
    Contributor - Level 1
    2020-04-24

    HI, 

    Help please. Did anyone know what is the difference between the Subwoofers shown in the picture. booth are Behringer B1200D Active PA Subwoofer. but one has the text "PRO".

    Thanks.

    BEHRINGER B1200 D.jpg
    read more...
    0 136
  • Ricktek
    Contributor - Level 1
    2020-04-18

    Just joined and so far this sucks. Bought a Behringer mixer after review of add showing software avaliable. Downloaded what I found and got was nothing more than public domain software. Audacity. This is not the software used in the web site demo. 

    Anyone have a clue whre I can get what was advertisedin web promo?

     

    This really sucks. Software should have come with product. Downloads require too much personal info. I did it and the download is NOT what was shown on demo.

     

     

    read more...
    1 161
    • Ricktek
      Paul_Vannatto


      @Ricktek wrote:


      Anyone have a clue whre I can get what was advertisedin web promo?





      That is an old video actually. The person in that video hasn't been with the company for at least 2 years. Many things have changed since then, including Tracktion (which he mentioned). It is now called Waveform which is available (version 7 is free) here. By the way, even the X32 and new Wing does not come with DAW software. Also, for the record, the Q802USB does not provide true multi-tracking signals. It only has stereo (2 track) bidirectional via USB.


       

      • April 18, 2020
    • Ricktek
      Ricktek

      Thanks for reply. Do you know if i can record stereo to pc using USB out on mixer? Would I be able to adjust audio going over USB with mixer or is it fixed at one setting? I am only looking to record a left and right channel.

      • April 19, 2020
  • mazuvva
    Contributor - Level 1
    2020-04-05

    Hello I'd like to know if you have a pair of speaker grills and which is the cost. I've lost them during a relocation.

    best regards,

    gianni 

    0 145
  • milesc
    Contributor - Level 1
    2020-04-05

    When I plug it into the wall and turn on the power, it makes a clicking noise. I'm not sure what I should do. I've been through a lot of trobleshooting steps thus far, but nothing has seemed to help.

    0 132
    • milesc
      RexBeckett

      @milesc 


      Hello Miles, welcome to the community.


       


      I suggest that you raise a Care ticket for Service Repair explaining your problem. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • April 5, 2020
    • milesc
      milesc

      I have done that, thanks. Do you know if there is a working phone number in the US for behringer as well. I can't seem to reach the number I already have 7028008290

      • April 5, 2020
  • danlynch37
    Contributor - Level 1
    2020-04-01
    Hi,
     
    I have tried to raise a support ticket three times tonight and it keeps saying there is an error.
     
    I have a Tannoy TS2.8 Sub (Serial Number 80006580160115806811) which has no sound coming out of it. The led on the back is flashing red and I have tried a different power lead and cable but that has not made a difference. The fuse is OK. It is still in warranty and I have attached proof of purchase. Can you resolve it remotely or will it need to be returned?
     
    Kind regards,
    Danny
     
    read more...
    0 184
  • Ashish_Cherian
    Contributor - Level 2
    2020-03-28

    I have Behringer audio interface UMC22. Now ,the problem is i can't install the driver for Windows 10. Please do response and help me in troubleshooting.

    0 3,758
    • Ashish_Cherian
      RexBeckett

      @Ashish_Cherian 


      Hello Ashish, welcome to the community.


       


      Windows should install the UMC22 using its standard USB audio drivers. Most audio software should be able to use the device through the WASAPI interface. Windows will show the UMC22 as USB Audio Codec or USB Audio Device


       


      The optional ASIO4ALL driver is only necessary if you must have an ASIO interface. This driver works with the WASAPI device mentioned above and provides an ASIO interface for DAW software. It can give lower latency than using the WASAPI device directly.


       


      What driver are you trying to install? What error messages are you getting?

      • March 27, 2020
    • Ashish_Cherian
      Paul_Vannatto

      Hi @Ashish_Cherian 


      Make sure you have the USB cable plugged into a USB 2.0 port (usually black), not a USB 3.0 (usually blue).


       

      • March 27, 2020
    • Ashish_Cherian
      Ashish_Cherian

      Thank you for the response. I'm using ASIO4ALL driver. But in Device Manager, the USB audio device is showing with the 'caution' symbol. I can't update driver from there. Can you please help me in installing the driver.

      • March 28, 2020
Go to page