Statistics

234,317 members
109,983 posts
  • Ricktek
    Contributor - Level 1
    2020-04-18

    Just joined and so far this sucks. Bought a Behringer mixer after review of add showing software avaliable. Downloaded what I found and got was nothing more than public domain software. Audacity. This is not the software used in the web site demo. 

    Anyone have a clue whre I can get what was advertisedin web promo?

     

    This really sucks. Software should have come with product. Downloads require too much personal info. I did it and the download is NOT what was shown on demo.

     

     

    read more...
    1 95
    • Ricktek
      Paul_Vannatto


      @Ricktek wrote:


      Anyone have a clue whre I can get what was advertisedin web promo?





      That is an old video actually. The person in that video hasn't been with the company for at least 2 years. Many things have changed since then, including Tracktion (which he mentioned). It is now called Waveform which is available (version 7 is free) here. By the way, even the X32 and new Wing does not come with DAW software. Also, for the record, the Q802USB does not provide true multi-tracking signals. It only has stereo (2 track) bidirectional via USB.


       

      • April 18, 2020
    • Ricktek
      Ricktek

      Thanks for reply. Do you know if i can record stereo to pc using USB out on mixer? Would I be able to adjust audio going over USB with mixer or is it fixed at one setting? I am only looking to record a left and right channel.

      • April 19, 2020
  • mazuvva
    Contributor - Level 1
    2020-04-05

    Hello I'd like to know if you have a pair of speaker grills and which is the cost. I've lost them during a relocation.

    best regards,

    gianni 

    0 106
  • milesc
    Contributor - Level 1
    2020-04-05

    When I plug it into the wall and turn on the power, it makes a clicking noise. I'm not sure what I should do. I've been through a lot of trobleshooting steps thus far, but nothing has seemed to help.

    0 107
    • milesc
      RexBeckett

      @milesc 


      Hello Miles, welcome to the community.


       


      I suggest that you raise a Care ticket for Service Repair explaining your problem. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • April 5, 2020
    • milesc
      milesc

      I have done that, thanks. Do you know if there is a working phone number in the US for behringer as well. I can't seem to reach the number I already have 7028008290

      • April 5, 2020
  • Ashish_Cherian
    Contributor - Level 2
    2020-03-28

    I have Behringer audio interface UMC22. Now ,the problem is i can't install the driver for Windows 10. Please do response and help me in troubleshooting.

    0 1,179
    • Ashish_Cherian
      RexBeckett

      @Ashish_Cherian 


      Hello Ashish, welcome to the community.


       


      Windows should install the UMC22 using its standard USB audio drivers. Most audio software should be able to use the device through the WASAPI interface. Windows will show the UMC22 as USB Audio Codec or USB Audio Device


       


      The optional ASIO4ALL driver is only necessary if you must have an ASIO interface. This driver works with the WASAPI device mentioned above and provides an ASIO interface for DAW software. It can give lower latency than using the WASAPI device directly.


       


      What driver are you trying to install? What error messages are you getting?

      • March 27, 2020
    • Ashish_Cherian
      Paul_Vannatto

      Hi @Ashish_Cherian 


      Make sure you have the USB cable plugged into a USB 2.0 port (usually black), not a USB 3.0 (usually blue).


       

      • March 27, 2020
    • Ashish_Cherian
      Ashish_Cherian

      Thank you for the response. I'm using ASIO4ALL driver. But in Device Manager, the USB audio device is showing with the 'caution' symbol. I can't update driver from there. Can you please help me in installing the driver.

      • March 28, 2020
  • Eric_Anderson
    Contributor - Level 1
    2020-03-27

    Amps died, no power. Want to cannabalize drivers for Bluetooth speaker build. Anyone have t/s parameters for the drivers?

    0 71
    • Eric_Anderson
      AlexLane

      Hi Eric,


       


      CARE might be able to find this info for you, I would suggest you send in a support ticket.

      • April 7, 2020
  • Songcatcher
    Contributor - Level 1
    2020-03-27

    I just bought my dream equipment at the ripe old age of 63 years.  Two QSC 12.2, One QSC 10.2,  Behringer Digital Mixer with IPad app, Shure ULXD Receiver, KSM8 Transmitter. I have enough to work with for now but will be adding and new power condenser, SKB rack in addition to the one I have, accessories to attach my antennas on the front of my receiver in the rack, and a maxed out 16 in Mac Book Pro custom with 2 Terabye SSD.  Ok so I figured out how to connect things to my mixer but now I need to know how to connect my computer to the mixer.  I'm thinking it would go in the USB but how do I fined a cable long enough to reach?  I use my living room and formal dining room for my equipment.  I am only doing this for me to sing at home and I haven't purchased any karaoke songs yet because I keep getting so many opinions about it.  I really like Sound Choice but, That's not happening.  Also once I connect the laptop, do I send my effects in the Behringer app to my mic channel on the mixer?  Also, If I were to purchase Antares Auto Correct or one of their software programs, can I use the effects in live singing or just recording?  It's a huge learning curve for me.  Thanks!

    read more...
    0 96
    • Songcatcher
      GaryHiggins

      @Songcatcher 


      Hello, not sure exactly how you plan to use everything but I would guess you will need to connect the usb from your mixer (you didn't say what model so I'm guessing X32) to your mac so that the software (or DAW) you use can access your mixer sound card. I use a 15 foot, type A>type B without issue. You can use a powered hub and get longer distances if needed. That will take care of the audio part back and forth. The mixer control itself will need a lan cable either to a router for wireless or directly to the Mac and one of the programs like X32-Edit. There are 2 parts here. the audio section and the physical mixer operation-for routing and fader movement etc. 

      • March 26, 2020
  • willc21577
    Contributor - Level 2
    2020-03-23

    Hi. I am setting up a 'home office' and have just dug out my MS16 speakers. Looks like I am missing the left right speaker connection cable. Does anyone know what cable it is and where I can get a spare?

    thanks

    Will

    0 129
    • willc21577
      RexBeckett

      @willc21577 


      Hello Will, welcome to the commnity.


       


      The connection betweeen the left and right speakers is light-duty speaker cable terminated with RCA plugs. I don't know a source for this type of cable but the MS16 is low power so a digital RCA cable like this should work. 


       


      If you are handy with a soldering iron it is not difficult to fit RCA plugs to 0.5mm2 speaker cable. There are also adapters like these which can be fitted without soldering.

      • March 22, 2020
    • willc21577
      willc21577

      Hi Rex


      Thanks for your reply. Looking at the back of the speakers, there is only one port. I have attached a photo. I think the one you suggested has two connections?


      Thanks


      Will8FF65F1E-D8A4-4F16-A4EF-4B798E78029D.jpeg

      • March 23, 2020
  • Happy_Mohab
    Contributor - Level 1
    2020-03-22

    Can I route the RCA outputs on the back of the UMC 204 HD to send to a Dazzle for video and audio recording live?

     

    0 88
    • Happy_Mohab
      AlexLane

      Hi and welcome to the community,


       


      I see no reason why this would not work, though I have no experience with Dazzle!

      • April 7, 2020
  • apauletto
    Contributor - Level 1
    2020-03-22

    I am on my second broken Behringer amplifier in less than two years. I have tried contacting support for repair or replacement and have not heard back whatsoever. I have spent over $600 on these amps, have kept them in fantastic condition, and they both went out randomly. Any instruction as to how to move forward is greatly appreciated.

    read more...
    0 78
    • apauletto
      RexBeckett

      Hello @apauletto , welcome to the community.


       


      Did you raise a ticket through the Care portal? If you tell us the ticket number we can get someone to see why you didn't get any response.

      • March 22, 2020
  • markrazack
    Contributor - Level 1
    2020-03-20

    I'm interested in the Behringer NX3000 Power Amplifier. What is the RMS Continuous power output of this amplifier into 2, 4 & 8 Ohms? Is the amplifier 2 Ohm stable? What is the Peak/Maximum power output also at 2,4 & 8 Ohms? Do i need an equalizer for this amplifier? I am interested in the Behringer FBQ3102 Equalizer, Is this equalizer compatible with this amplifier, and is it a good EQ to match this amplifier with? Can i run this amplifier at 2 Ohms continuously? Will that cause any damage to the amplifier? Can the amplifier be run in mismatched loads/impedance, for instance if i want to run channel 1 at 2 Ohms and Channel 2 at 2.67 or 4 Ohms? I'm interested in the 220-240 Volts variant of this amplifier, Do I need a voltage regulator for the device, since AC Voltages tend to fluctuate world wide? Or is the amplifier designed to withstand voltage fluctuations without issues? At maximum volume, what would the power consumption of the amplifier be? If I buy the 220-240 Volts Variant of this amplifier, Can it work on the FBQ3102 Equalizer if it's 120 Volts? I can buy a step down transformer for the EQ so it can plug into 220-240 volts just as the amplifier, Would that be okay for the amplifier to be 220-240 Volts and the EQ to be 120 Volts? Will they work together or be any compatibility issues? Or can they damage each other in any way due to this configuration?

    I've read online that there was an issue with the Behringer iNuke Seriess, Especially the iNuke NU3000 where they go into protection mode, also I read that there were some Schottky Diodes issues in the iNuke Series amplifier, Were these issues addressed and corrected the the NX Series amplifier? The NX Series is the newer version replacing the iNuke, right? What is the input sensitivity of the NX3000 @ 2,4 & 8 Ohms? What's the difference between the red and amber light on the unit, one says limit and protect, isn't there a clip light? Can tell me how to match my gains between my equalizer, source unit and amplifier? Is there any documentation?

     

    read more...
    0 141
    • markrazack
      AlexLane

      Hi Mark,


      OK wow lots to get through here, let me take a deep breath aannnnnnnd...


      What is the RMS Continuous power output of this amplifier into 2, 4 & 8 Ohms?


      2 Ohm - 2 x 1500W
      4 Ohm - 2 x 900W
      8Ohm - 2 x 440W


      Bridge 4 Ohm - 3000W
      Bridge 8 Ohm - 1500W


      You need headroom though, its allways best to aim for a MINIMUM of 20%, so take your loudspeakers RMS power rating and ensure it is AT LEAST 20% lower than the above figures.


      Is the amplifier 2 Ohm stable?


      Yes in normal operation, No in bridge mode.


      What is the Peak/Maximum power output also at 2,4 & 8 Ohms?


      You can assume this to be double the RMS rating.


      Do i need an equalizer for this amplifier?


      I would reccomend some kind of loudspeaker processor yes, but it really depends on the application. What speakers are you planning on driving with the amplifier?


      I am interested in the Behringer FBQ3102 Equalizer, Is this equalizer compatible with this amplifier, and is it a good EQ to match this amplifier with?


      I think you are better off with a loudspeaker processor such as the DCX range, the FBQ would work as an overall system EQ.


      Can i run this amplifier at 2 Ohms continuously?


      YES! (But not in bridge mode)


      Will that cause any damage to the amplifier?


      NO! (Unless you run it at 2 Ohm in bridge mode or over load it by driving speakers with too high a power rating)


      Can the amplifier be run in mismatched loads/impedance, for instance if i want to run channel 1 at 2 Ohms and Channel 2 at 2.67 or 4 Ohms?


      Yes you can do this.


      I'm interested in the 220-240 Volts variant of this amplifier, Do I need a voltage regulator for the device, since AC Voltages tend to fluctuate world wide?


      No you shouldn't need a regulator, unless you are somwhere with truly unstable power! 


      Or is the amplifier designed to withstand voltage fluctuations without issues?


      As long as they are in the 220-240 volt range you will be fine. It's generally worth testing your power source before running a show!


      At maximum volume, what would the power consumption of the amplifier be?


      This is a very subjective question, you are better off looking at an average as music is inherrently not maximum power all the time. 1/8 rated power is pretty standard. 350W is a sensible figure.


      If I buy the 220-240 Volts Variant of this amplifier, Can it work on the FBQ3102 Equalizer if it's 120 Volts?


      If the power sent to each is from a seperate and appropriate source then yes, the FBQ will immediatly blow its fuse if given 220 volts and the amp will simply not turn on if its given 120 volts.The line level outputs will remain the same voltages so you can feed the 220 volt amp from the 120 volt EQ if thats what you want to do.


      I can buy a step down transformer for the EQ so it can plug into 220-240 volts just as the amplifier, Would that be okay for the amplifier to be 220-240 Volts and the EQ to be 120 Volts?


      See above answer, be careful please


      Will they work together or be any compatibility issues? Or can they damage each other in any way due to this configuration?


      Again, be careful! The power input will not affect the line level output or input voltage.


      I've read online that there was an issue with the Behringer iNuke Seriess, Especially the iNuke NU3000 where they go into protection mode, also I read that there were some Schottky Diodes issues in the iNuke Series amplifier, Were these issues addressed and corrected the the NX Series amplifier?


      I am confident that this is resolved.


      The NX Series is the newer version replacing the iNuke, right?


      Kind of yes, its a new range of amps.


      What is the input sensitivity of the NX3000 @ 2,4 & 8 Ohms?


      For rated power into 4 Ohms its 0.775 volts or 0dBu


      What's the difference between the red and amber light on the unit, one says limit and protect, isn't there a clip light?


      Amber = careful now your close to limit
      Red = Please turn me down! I am limiting and will go into protect mode shortly.
      Loss of audio = I am now in protect mode, you hurt me.


      Can tell me how to match my gains between my equalizer, source unit and amplifier? Is there any documentation?


      Research gain staging, generally you want to feed the amplifier with as "hot" an input signal as you can without clipping. This will ensure that when you come to turning the amplifier gain up your input signal is nice and far above the noise floor. Amplifying a low input signal means the noise floor is closer to the level of the input signal and you end up with a noisy output as you are gaining up the noise floor.

      Annnnnd breath out...

      Hope that helps

      • April 7, 2020
Go to page