Statistics

285,084 members
166,987 posts
  • chucknology
    Contributor - Level 1
    2020-09-22

    Hi all,

    Connected my G-system last week with send-return on the amp. Now when I activate the tuner it won't mute my output anymore.

    Before when I went straight in the amp input it worked all fine.

    Any ideas?

    0 42
    • chucknology
      diegowacker Perhaps you must configurate any kind of global function to mute it ?
      • September 23, 2020
      • Tuner does not mute output
        chucknology It is proframmed’like that. Display says Output mute.
        • September 23, 2020
  • vincenzokeez
    Newcomer - Level 1
    2020-09-21

    Why is the overload light always on. Just got this new and I am so pissed!!!!

     

    Any help please. Annoyed I just can't speak to a bloody tech advisor on the phone!

     

     

    0 83
    • vincenzokeez
      RexBeckett I suggest that you open a Care ticket for technical support. At the top of this page, click Support -> Create a Care Ticket and select Type: Technical Support. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • September 21, 2020
  • ANEESHAPPU
    Newcomer - Level 1
    2020-09-20

    where to download the driver for mac to use perform vk as interface?

    0 33
  • RossAnderson
    Newcomer - Level 1
    2020-09-19

    Hi 

    I've installed V1. 07 firmware but still can't follow Cubase 10.5 (on Windows) other than the first bank. 

    Anybody got a solution, or do I just get a refund? 

     

    Thanks in advance, 

    Stay safe 

    Ross 

    read more...
    0 60
    • RossAnderson
      john0121 Hi Ross, at this time the X TOUCH ONE doesn't cycle move banks via the channel up/down buttons on Cubase you have to use the bank buttons instead. The development team are aware of this and we hope to see it implemented in a future firmware update.
      • September 20, 2020
    • RossAnderson
      RossAnderson Hi, thanks for the reply BUT the bank buttons don't work. When I try them I just get a message in the lcd saying "SELECT BANK" and the only option I then have is to go left with the channel button, which just scrolls back through bank 1. I don't mind having to press bank to move but at least the software should do what is promised. Behringer's publicity blurb says its a "universal" controller but its not. I'm very unhappy that I've spent money on something that doesn't do what is promised and I should wait for new software.
      • September 21, 2020
    • RossAnderson
      john0121 Sorry what you describe sounds different to the issue I was referring to. Can you please open a tech support case via the Support button at the top of the page and include details of you setup/config and a video showing exactly the problem in action. I can then work with the development team to see if there is a solution.

      Thanks
      • September 21, 2020
  • MD131016
    Newcomer - Level 1
    2020-09-19

    All the sudden my US600 pedal will not stay on. It works as long as I hold foot switch down but stops as soon as I release the foot pedal.

    Any suggestions?

    Thanks

    0 36
    • MD131016
      DavidKnighton Hello MD131016,
      There are two MODES that are only active while the footswitch is depressed. What you're experiencing may in fact be expected behavior while in these two modes.

      Trem Bar: The effect is only active when you keep the footswitch depressed
      Flutter: The effect is only active when you keep the footswitch depressed
      • September 18, 2020
  • geoffpackman
    Newcomer - Level 1
    2020-09-17

    I use iFCB OS X to control my FCB1010 through Amplitbe 4. I have recently upgraded to Mac OS Catalina 10.15.6 and iFCB OS X no longer works or runs on this OS.

    I have looked at the developers website and they are no longer going to upgrade it as they say the FCB1010 is an old product (even though I have recently bought one brand new).

    Is there any other software contrller I could use to control the FCB and through Amplitube 4?

    read more...
    0 63
    • geoffpackman
      KyleJohnson Hello. The iFCB software and other FCB1010 editor softwares are not developed by Music Tribe. If you are having trouble with a certain software I recommend you contact the developer.
      • September 17, 2020
  • FLATSWIER
    Newcomer - Level 1
    2020-09-15

    nx6000 is stuck in protection mode, does anyone know how to fix??

    0 85
    • FLATSWIER
      john0121 Hi Faltwier, this will require a service unfortunately. Please fill out the service request form via the support button and a member of the team will get this arranged with you.
      • September 15, 2020
  • ICOTEA
    Newcomer - Level 1
    2020-09-15

    Hello,

    I'm new to this DAW sofware. I've bee trying to record an electric guitar. When I play it it sounds nice throught the headphones but when I try to play or export what I recorded it comes all chopped and messy

    Any idea what could I be doing wrong?

     

    Many thanks!

    read more...
    0 48
    • ICOTEA
      john0121 Hi ICOTEA, what interface are you using? Have you tried increasing the buffer rate? it might be that your computer processing power is struggling with your settings.
      • September 15, 2020
      • Tracktion reconrding issues
        ICOTEA Hi John!
        • September 16, 2020
      • Tracktion reconrding issues
        ICOTEA im using a UM2 do you think it has something to do with these settings?
        • September 16, 2020
      • Tracktion reconrding issues
        john0121 Have a look under Audio Devices in Tracktion where you have selected the UM2 and try upper the "audio buffer rate" and see if this helps the sound run smoother.

        What about sound form other applications like YouTube or Spotify for example is that clear and smooth?
        • 1
        • ·
        • September 16, 2020
      • Tracktion reconrding issues
        ICOTEA Hi John! I figure it out. It had to do with some of the settings. Now it works...thanks a lot!!!
        • 1
        • ·
        • September 20, 2020
  • Brianhoran
    Newcomer - Level 2
    2020-09-12

    h I have a bh 250 bass head and I am wondering what is the maximum load ohms it can handle it only says minimum 4 ohms on the back. I have a 16 ohm cab can I use this and what is the maximum it can take thanks 

     

    0 47
    • Brianhoran
      TC-Mike Max load is 4 ohm, because that's the worst case. It can handle 8 ohm or 16 ohm or 32 ohm just fine. 4 ohm is where it has to deliver the most current, so that's "max load" in a sense. ​so you'll get the 250 watts into 4 ohm load.
      125 watt into 8 ohm...
      • September 16, 2020
  • tomdenkertuner
    Newcomer - Level 1
    2020-09-12

    I would like to control parameters of my neutron with a pedal. I don't see any pedals that produce plus and minus five volts. I spose I could make one from an expression pedal.

    0 64
Go to page