Statistics

249,487 members
126,497 posts
  • New
    oceanaire
    Newcomer - Level 1
    2021-09-17

    I am trying to use a virtual (gotowebinar) interactive program on my laptop to communicate with people in attendence (Ballrom) and virtualy.

    I have a Behringer Ultra-DI6009 which enables the sound from my laptop to go through a mike input to a amplifier connected to the ballroom sound system.  People in the audience can hear the virtual people when they speak.  My problem is connecting the ballroom sound system to my laptop so that virtual attendees can hear what is happening in the ballroom.  Currently I am using a second laptop set up infront of a monitor speaker on the amp to broadcast the sound.  This is ok unless there is background noise in the room where the amp is. 

    Any suggestions to set up direct sound input to the laptop

     

     

    read more...
    0 0
  • New
    RickLipka0816
    Newcomer - Level 1
    2021-09-16

    I'm in need for the two port connector for the output on the back of a Lab Gruppen E12.2 amp.

    i've never seen this type of Phoenix connector.

    read more...
    0 3
  • New
    Waban07
    Newcomer - Level 1
    2021-09-15

    Hello,

    I just received a new Mac mini. I have hooked up the Behringer via USB and the speakers are working but they are much quieter than they were when the interface was attached to my Asus laptop.  I have gone into the sound settings and adjusted the volume there but they are still much quieter.

     

    Has anyone else experienced this?  My operating system is Mac OS Big Sur 11.6. 

     

    I am not sure I have chosen the right Category and subcategory but there doesn't seem to be options to suit. 

    read more...
    0 1
  • New
    AVIMedia
    Newcomer - Level 2
    2021-09-14

    Good Morning, 

    Ran into an issue witn a clients x32 that was new to me.  The scribble strips for the bus/matric/DCA/Stereo faders all light up but they will show the names of channels or change color.  Is there something that Im missing here. Or is there a problem with the mixer. Thanks for any help you can give me. 

    read more...
    0 3
    • AVIMedia
      KyleJohnson Hello, Kyle here with Music Tribe. The first thing you could try is a Console Initialization. I'd backup all of the scenes first. Open the Setup>Global menu and select CONSOLE under the RESET/INIT heading. This will set the console settings to default but not erase any library/scenes/presets. If you continue to have issues I suggest you submit a support ticket. Click on Support and then Technical Support.
      • Tue at 8:14 AM
  • New
    ChadTallon1
    Newcomer - Level 1
    2021-09-13

    Hi all.  Would this mixer be able to be used ato push music through from an iPad to stadium speakers?  Or would it need an amplifier?

    0 1
    • ChadTallon1
      KyleJohnson Hello, Kyle here with Music Tribe. The outputs of the 1204 are not powered. If your speakers are powered then you can connect from the outputs of the 1204 into the speakers. If they are passive speakers then you would need amplifiers as well.
      • Mon at 3:25 PM
  • New
    DJG5534
    Newcomer - Level 1
    2021-09-13

    It seems the led in the channel view shows the input signal. Can it be changed to see post EQ or send to LR? I have looked but cannot find any information on how to set/change. This can be changed in other sections, but i can't see how in channel or LR view.

     

    Thanks 

     

    D

    read more...
    0 2
  • New
    maestro726
    Newcomer - Level 2
    2021-09-08

    Hello my name is Ricky Hopson and I purchased the Berringer Xenyx QX 1002USB mixer about 3 years ago and now the effects won't work or even light up from the display. Very disappointed.

    0 2
    • maestro726
      john0121 Hi Ricky, sounds like a hardware fault unfortunately. Please fill out the service request form via the Support button at the top of the page and a member of the team will help you arrange a repair. Thanks
      • Sep 10
  • New
    AlanMinnear
    Contributor - Level 2
    2021-09-06

    I recently bought a VL3X. I've seen a few demos but I like more on how to use the synth as a voice replacement. I think I've seen all the video demos, and they sound good, but don't tell you how to get those sounds. I need to know:

    1. Which presets will give me the synth/talk box sounds
    2. The set up for both guitar and keyboard, (even keytar), that will allow my voice to sound the synth for leads.

    Thanks for any help.

    read more...
    0 6
  • New
    Rocktambuls
    Newcomer - Level 1
    2021-09-02

    Hi 

     

    I have a rack with Iem sistem and a x32rack to run it. As monitoring. We are going to self control via smartphone

    The 8 xlr outputs of the x32 rack is connect to 8xIEMs.

    Our band spend 26 channels connected to DL32. 

    Also we have a M32 for FOH

    Well I need to know how I need to connect and routing to have gain channel control on FoH. Trim gain in X32rack. 

    I want a pre fader send to x32rack. 

     

    Is this correct? 

     

    Aes50a from dl32 to aes50a of M32

    Aes50b from M32 to aes50a off x32rack

    M32 internal clock

    X32rack aes50a clock

    M32:

    Input routing (home)from aes50a 1-8....25-32

    Aes50a out9-16 ( for main LR on 15&16 to Pa on Dl32) 

    Aes50b out 1-4 & 5-8

     

    X32rack

    Xlr out  --> local 1-4 and local 5-8????? 

    And router WiFi on x32rack to control all? Is it correct? 

     

     

     

    read more...
    0 6
    • Rocktambuls
      Nigel67 Hi Rocktambuls. There are a couple of things that I am not quite sure about in your description. You mention that you want a pre fader send to the X32 Rack which I am guessing is the 26 inputs so that you can mix them for the IEMs. In you set up description, you do not mention sending the inputs from the M32 to the Rack, but you do mention AES50B Out 1-4 and 5-8. What audio signals are you hoping to send from the M32 to the X32 Rack? If it is just the inputs (post mic amp, pre everything else, then you would assign AES50A Inputs 1-32 directly to AES50B Outputs 1-32 on the M32 and then assign AES50A Inputs 1-32 on the rack to the channel inputs. Unfortunately, there is only 1 mic pre amp per channel, so you would set these up with the M32, and then any make up gain would be controlled on the two mixers using the digital trim. This way, you would still have some kind of independent gain control on both mixers. You would use the HA Split function for this, so the analogue gains would only be controlled on the M32 via the LCD display and the main Gain pot on the surface of the M32 would be a digital trim. This is described in the manual.

      The clocking set up you have mentioned is correct.

      The Out 9-16 from the X32 Rack is the only unknown as I am not sure where you are mixing this audio, in the X32Rack or from the 8 outputs on the M32. I need some more information on this please. If it is the X32, then you would assign the 8 outputs to the Local 1-8, or if it is the 8 outputs being sent over the AES50, then you would assign the AES50 directly to the Local outputs, but this needs more clarity.
      • Sep 5
  • New
    psapenaro
    Newcomer - Level 2
    2021-09-01

    I need tech support for anXR18. I think mine just went bad. Is there a way to call?

     

    0 3
Go to page