Statistics

299,674 members
183,448 posts
  • New
    Azm892
    Newcomer - Level 1
    2022-10-05

    I am attempting to use a tp-link router to connect to my xr18 from both my computer and iPad. I am able to connect through the Xair’ a WiFi, but this connection is unreliable in crowded rooms, so I have decided to go through a router. I have watched many videos and read many forum articles on how to do this to no avail. I have made sure that the mixer is set to DHCP mode for Ethernet, the switch is on Ethernet mode, and connect to one of my router’s LAN ports via a cat5e cable. I see the blinking light at the Ethernet port on the air, so I know that it is communicating with my router. I have attempted to connect both my iPad and my computer to the router both through WiFi and Ethernet connections. As far as I can tell, these connections are fine as well. The problem is that when I open the Xair app, I cannot connect to my mixer under any of these configurations. The app cannot find the mixer. On my iPad, which is my preferred controller, I have tried to manually enter all the IP addresses that seem like candidates (the one from my router, the one listed in the network LAN window from the xair, various addresses I found through watching videos and reading forums). However, when I push the connect button, nothing happens on the Xair app. On my computer, the Xair app searches for, but does not find the mixer. So I am baffled. I could use some assistance in finding the way to make this connection work, especially from my iPad to the Xair via a router.

    read more...
    0 2
  • New
    knbaard
    Newcomer - Level 1
    2022-10-01

    We had a live performance at the school where I work. A couple of pupils operated as live technicians. All rehearsals went exactly as planned but just before the actual show the monitor speakers didn't get any sound from the mixer, that is: It didn't get any sound from the 2-Track/CD-input.

    My mixer is a Behringer Eurodesk SX3242FX. The speakers I use are Behringer Eurolive B215D as main speakers plus Behringer Eurolive B208D as monitor speakers. I use the AUX sends for the monitors. The monitors received sound from all the microphones but after the last rehearsal I didn't get the sound from the 2-Track/CD-input anymore. Since the monitor speakers still receive sound from all the microphones and the playback sound still played over 2-Track/CD-input to the main speakers I asume it has something to do with the settings on the mixer itself. Can anyone please help me to resolve this problem?

    Best regards

    knbaard

    [email protected]

     

    read more...
    0 0
  • New
    kmbaa02
    Newcomer - Level 1
    2022-09-28

    Hi all, new here and hope you can help.

    The band have just got an X 18 and we are trying to run all the vocal inputs to 2 individual monitors and 1 set of IEM. The inputs are routed to the AUX outputs at varying levels as our lead singer wants to hear a bit of the backing vocals as well as himself and vice versa for the backing vocals.

    When trying to setup the IEM we are getting a very muffled and crackly sounds, I've tried the IEm's on our old mixer and they sound perfect. I then tried the personal monitor (a Behringer 205d) and the sound from that sounds like its being played underwater.

    I'm at a complete loss, I've reinitialised the X18 and set very basic outputs and still the same, what hair i did have is going even quicker.

    read more...
    0 2
    • kmbaa02
      Nigel67 Hi kmbaa02. This is not something that we will be able to fix on this Forum. Please submit a Technical Support ticket and include a full description of your set up and also include a copy of your scene so that we can check the routing, etc. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. Many thanks
      • Sep 29
  • New
    stubarnard
    Newcomer - Level 1
    2022-09-26

    Hi, I can't find much at all about the Shows functionality for my XR18, but it seems like a great opportunity!

    I understand the difference between Snapshots & Scenes, but I'm trying to check if the following limitatations really exist:

     

    1. Shows functionality (having a collection of Scenes readily available for selection)- looks great in the Android app, but
      1. Zero functionality within PC Edit app??
      2. Only basic functionality within iOS app??

    2. PC Edit app and iOS app can save Snapshots with granular selection over what is / is not saved, but:
      1. PC Edit app cannot do the same with Scenes?
      2. iOS cannot do the same with Scenes?

    3. Channel Safes when switching Scenes (which the Android app seems to have)
      1. PC Edit app has no functionality for this?
      2. iOS app has no functionality for this?

     

    Am I missing something? Is it on a long list of feature requests somewhere? Is it just me??!!

    Thanks for any insight

    Stu

     

     

    read more...
    0 2
  • New
    popleclara123
    Newcomer - Level 1
    2022-09-26

    The signal is really really weak and I can't seem to update it on my laptop. Think theres an issue with it and want to keep it alive because the vocal fx are so good! 

    0 1
  • New
    Nagelt86
    Newcomer - Level 1
    2022-09-24

    I have tried EVERYTHING that I know how to make the rack 32 just an idiot stage box like that s16 ha. Beating my brain agaist the brick wall at FOH somewhat helps. Here's what I would ideally like to do. I would like to have my x32 at foh and use the S16 as Inputs 1-16 and outs 1-8, then have the Rack 32 as 17-32 and outs 9-16... I know theres a way to do it without having to just go out and buy a s32. I just cant wrap my brain around the AES routing. any advice would help!

    read more...
    0 2
    • Nagelt86
      Nigel67 Hi Nagelt86. If you haven't already worked out the routing, please submit a technical support ticket and someone will get back to you with help. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. This video by a user may help as well - https://www.youtube.com/watch?v=wqpx9uuLLwc. Hope this helps.
      • Sep 29
  • New
    Hutchball
    Contributor - Level 1
    2022-09-22

    Hi. Does the TC Helicon Voicelive H1 have a setting where you have to hold down the foot switch for the harmony to activate?

     

    thanks. 

    0 5
    • Hutchball
      NicJonesMT Hi HutchBall.
      Unfortunately no. There is no option to switch between Switching and Latching mode. If you are looking for a pedal that does this then the Harmony Singer 2 may be a better option for you.
      • Sep 29
  • New
    wsfife52
    Newcomer - Level 1
    2022-09-19

    We are a four piece acoustic band, and we use our PMP 2000 in Main/Monitor mode with passive speakers daisy chained.  No problem there.  For monitors we are using Kustom KPM4 powered monitors through the preamp outputs on the front.  I want to use an in-ear monitor, and I have a Behringer PM1, which I thought would work.  Unfortunately, nothing I have tried has produced any sound in the earpiece at all, including:

    • preamp monitor out --> Instrument cable --> TS (F) to XLR (M) adapter --> PM1
    • preamp monitor out --> Ultra DI --> PM1

    Clearly I am missing something essential (and probably very basic) here.   Is the PM1 the culprit?  Would a P2 work using one of the above connection scenarios?  Is a separate headphone amplifier required?  I have to believe that others have faced (and solved) this problem.   Anyone willing to share a proven solution?

    read more...
    0 3
  • New
    Saccas
    Newcomer - Level 1
    2022-09-16

    Bonjour,
    J’ai depuis 12 ans une x32 et depuis 8 ans une m32, peut après avoir fait leur mise à jour, 
    j’ai remarqué une instabilité et des bugs allèatoire (faders qui bouge tout seul ou qui ne se racale pas au même niveau en changeant de page, parfoi elles se fige, ou ne repond plus, d’autre fois temps raiponse important voir des effet de phase en sortie)

    autours de moi d’autre technicien on constatés les mêmes bugs alèatoire 
    autre fais commun il ont comme moi reçut des groupes venant d’espagne qui on rapellait une mèmoire sauvgarder au par avant


    Ses produits commencant à soufrir de cette mauvaise réputation (non stable) commence à se tournés vers des produits concurrents

    avez-vous une solution ? et/ou une manipulation à faire ?

     

    read more...
    0 1
    • Saccas
      Nigel67 Dear Saccas, There are no known bugs that you are describing with the faders. When did you last have your consoles serviced? That may be a possible reason for them juddering. Please can you raise a Technical Support ticket containing all the issues / software bugs that you are experiencing and a colleague will come back to you with further information / advice. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. Can you provide a short video as well showing the fader issue. Many thanks
      • Sep 22
  • New
    MarkHoover
    Newcomer - Level 1
    2022-09-15

    We are using a dl16 stage box with our m32r live soundboard. Something has happened to our routing and we are not getting any sound. I am pretty sure we have the input set right for the snake however, I am not sure what to set the AESA block for and the Card. 

    read more...
    0 1
Go to page