Statistics

207,757 members
79,866 posts
  • polm
    Contributor - Level 1
    2019-10-22

    I bought my first Voicelive 3 Extreme about 4 months ago and noticed everytime I plug my Guitar output (Dual Mono) to my amp a loud Hum/Whine noise comming from the amp. When I plug my VL to my pedalboard, cause of the longer path, it obviously goes louder and make it impossible to use it live. The noise doesn't seems to appear on the mic output. I have tried almost everything (ground, better isolation, new power supply) but didn't seems to fix it. Do you think it is the hardware defecting? Or an update of the firmware could potentially fix it? 
    If anyone know what it is or could help me because I cannot wait to incorporate it to my set up...  
    Thanks 

    read more...
    0 132
    • polm
      TCH-Spencer

      Hey @polm,
      If you get in contact with our support team they'll be able to help you troubleshoot this further.  I can say we've never experienced that here, so I don't think it's firmware but rather something with your actual setup.  Feel free to share your entire signal path and others could help you out here too.  Cheers!

      • October 25, 2019
  • ghendric
    Contributor - Level 1
    2019-10-21

    Is there a way to reset the PlayAcoustic back to default settings?
    Thanks

    0 77
    • ghendric
      TCH-Spencer

      Hey @ghendric,
      From page 65 of the manual:


      “How do I perform a full factory reset?”
      ► When powering up the unit, press and hold “Back” and “store”.
      ► Any changes you have made to presets or setup information will be erased.
      ► Back up your custom presets and setup data via VoiceSupport

      • October 25, 2019
  • holden
    Contributor - Level 1
    2019-10-21

    Need help using VL3X as an audio interface with my ipad. Trying to use quantiloop app as my 4 track looper rather than the looper on VL3. Any help out there?

    0 96
  • SimonSchmidt
    Contributor - Level 1
    2019-10-21

     Hi there,

    I've been using a Voice Live 2 in the studio and a Voice Voice Live Touch 2 for live performances.

    I start to miss some features on the Voice Live Touch 2, more specifically the just Intonation setting and midi notes 4chan.

    I've read in the manual of the Voice Live Touch 1 that it does midi notes in 4chan but Just Intonation is not mentioned. However in this video of this editor

    https://www.youtube.com/watch?v=nB7n4Gf5Jj0

    there is a tap for the "Tuning" Parameter set to Equal. This for me indicates that it is possible to set the Voice Live Touch to Just Intonation. Would somebody mind clearing this up? Is it that this feature is somehow hidden in the sysex implementation?

     

     

     

     

    read more...
    0 110
    • SimonSchmidt
      TCH-Spencer

      Hey @SimonSchmidt,
      Yes indeed that "Tuning" parameter in the Harmony block is hidden away in sysex land.  We don't typically share sysex manuals, but this product is so old... ¯\_(ツ)_/¯  I've attached it for you.  At sysex offest 22 you'll see there's a "Harmony Tuning" parameter which is probably what you're after.  It looks like it has 3 possible values, without deeply digging into the code I can't tell you what those are... But in VoiceLive 3 the three tuning references are:  equal, just, and barbershop, in that order.  It might take some experimentation to figure out what they are in Touch 1, but hopefully this gets you on the right track.  Cheers!

      VoiceLive Touch Sysex Manual.pdf
      • October 25, 2019
  • mtpizzi
    Contributor - Level 1
    2019-10-21
    0 83
  • AlanMinnear
    Contributor - Level 2
    2019-10-20

    I use a wireless Keytar for lead breaks, but the harmonies stop when I play the keytar. I have a sequencer track ready to go for the harmonies, but it won't change the harmonies. How do I set up the VLT 2 so the harmonies work from a sequencer track?

    read more...
    0 106
    • AlanMinnear
      TCH-Spencer

      Hey @AlanMinnear,
      Can you please expand on what you mean by "sequencer track"?  Is this just a MIDI track with MIDI notes?  If that's the case, you can run it into the 5-pin MIDI input on Touch 2, and in the Harmony effect set the key to "Auto".  Cheers!

      • November 13, 2019
  • Santhos31
    Contributor - Level 1
    2019-10-20

    Hello,

    I can't find the voiceworks plus editor on the internet, even the old one. Can anyone help me?

    1 180
    • Santhos31
      TCH-Spencer

      Hey @Santhos31,
      Do you mean this?

      • October 24, 2019
    • Santhos31
      frangomat

      Hello @Santhos31 


      Have you been successfull finding Vysor Editor for Voiceworks Plus yet?


      It must have been available for free a while ago: 


      https://www.kvraudio.com/product/vyzor_editors_for_tc_helicon_by_tc_helicon


      I really don't want to spend $159 on Midi Quest Essentials If this single program used to be freeware.


      Regards,


      Frank


       

      • November 1, 2019
    • Santhos31
      arlopete1

      Santhos31:


      I just came across your post while doing a desperate search for a firmware update for my Voiceworks Plus Harmonizer unit. I was just able to find the original editing program that you may have been looking for so maybe there is a way that I can get it to you. I will attach a couple of screen shots of what it looks like on my Mac.  Also, if you have a Voiceworks Plus you might have one of the updates that I am looking for. My unit (which is virtually new and unused in the original box) still has the original firmware version of 1.01. I have not been able to find version 1.21 which I think is the last available update but perhaps you have it. Please let me know. I look forward to your reply!


      Pete


       


      Screenshot 2020-02-20 07.01.17.pngScreenshot 2020-02-20 07.02.01.png

      Screenshot 2020-02-20 07.02.01.png
      • February 19, 2020
  • Eli
    Contributor - Level 1
    2019-10-19

    Hi, my question is as the title shows. Does harmony work with karaoke? Thanks!

    0 106
    • Eli
      TCH-Spencer

      Hey @Eli,
      Perfrom-VK gets its chordal info from a few sources: the MIDI input, the instrument input, the auxiliary input, and the RoomSense microphone.  Perform-VK dynamically switches between these sources - when one goes silent it'll start listening to whatever is giving it signal, with the RoomSense mic being the last resort.  So in your case you'd likely want to be sending the karaoke track to the auxiliary input, and as long as the track clearly represents the chords being played then harmonies will work great.  Our harmony algorithm needs to be able to hear at least the root and the third of each chord to properly identify what's being played - so for example a track of an acoustic guitar would be great, but a track of just drums likely wouldn't contain enough musical info and harmonies would sound weird.  Basically, yes it should work but it really depends on the track - that'll just take some experimentation on your part.  Cheers!

      • October 24, 2019
  • RalfLeRenne
    Contributor - Level 1
    2019-10-19

    Hello,

    I bought a "Harmony Singer 1" a few years ago, and would like to switch to the second version. I'm in the process of making all my equipment for concerts "battery powered", and I saw this Harmony Singer 2 is able to do just that.

    But I still need to know if it can work with rechargeable batteries, since they usually tend to have less voltage. I would also like to know for how long the pedal can run on batteries. How many hours would it be ? 

    Thank you very much, 

    Have a great day,

    Thibault

     

    read more...
    0 133
    • RalfLeRenne
      TCH-Spencer

      Hey @RalfLeRenne,
      I'll be honest with you, battery life ain't great.  I tested a Harmony Singer 2 with fresh AA's (non-rechargeable) and it lasted three and a half hours before dying.  I don't think batteries were intended to be the primary power source for these stomps, more like a backup.  When a 9V adapter is plugged in, the pedal will use that wall power and ignore the batteries, which then kick in if wall power is removed.  Anyways, I think Harmony Singer 2 has the worst battery life out of the bunch because it has the busiest algorithm, but yeah you might want to have a backup set of rechargeables.  Cheers!

      • October 23, 2019
  • Morris256
    Contributor - Level 1
    2019-10-17

    I purchased a VoiceLive3. Gigged with it for a year. The power input socket went bad. Never left it plugged in while not in use. Needed a rig to gig.. so I bought a VoiceLive3 Extreme.. a year later the same thing happened. Is this a common/fixable issue? I’m a little disappointed in the quality vs the price I paid for these items. Please help.

    read more...
    0 91
    • Morris256
      ChrisF

      This can just be the mechanical act of plugging/unplugging the power cord onto the unit. It should be more robust, I agree. I don't have a VL3, but a VLPE, and I put it on a pedal board witha PSU so I never have to plug/iunplug the power directly onto the unit.

      • November 9, 2019
Go to page