• New
    MarcelNYC
    Contributor - Level 2
    2021-08-06

    I've always set the eq settings on my iQ tops and subs to "None" because I think it would be flat giving me more precise control from my X32 mixer. Having said that, what exactly does the "Live" setting do?  What frequencies does it boost/cut?  Should I consider it for indoor/live performances?

    I'm not near my PA otherwise I would try A/B the settings so I was hoping to get some real-world feedback.

    read more...
    0 38
    • MarcelNYC
      Paul_Vannatto Using the Turbosound Edit 1.4, you should be able to see what those presets do, since it provides a graph. I always set my iQ speakers at None and do the EQing with the X32 outputs.
      • Aug 6
      • iQ Series Eq Settings: "None" vs "Live"
        MarcelNYC Thank you Paul. I'll look into that. I've never used TSE 1.4 before and forgot it exists. Can I connect to multiple iQ speakers at once? Does it work with Ultranet (I doubt it) or do I have to run a bunch of USB cables too?
        • Aug 7
    • MarcelNYC
      Paul_Vannatto Hi Marcel, no unfortunately the editor is designed to connect to a single iQ speaker at a time via its USB port.
      • Aug 7
  • New
    GregorySwagger
    Newcomer - Level 1
    2021-08-05

    looking for a tower array for an ip1000 i had one stolen. thanks in advance

    0 34
    • GregorySwagger
      ChrisEdwards1 Hi GregorySwagger, if you have not yet done so could you please contact our spares team. To do this go to support at the top of the page and scroll down to the Spares tab, once a ticket is created they will be able to advise further.
      • Aug 5
  • New
    IvanAmadoFuentes
    Newcomer - Level 1
    2021-08-03

    Looking for a replacement mother board, turbosound audio was dropping, now making no noise at all, but turns on. I've called and contacted! Pls help.

    0 45
    • IvanAmadoFuentes
      Dale_M Hi there I think I have found your support request ticket on CAS-476138-V9H3R1 -I will reply to you shortly.
      • Aug 3
  • New
    Dnrbnsn2
    Newcomer - Level 1
    2021-07-28

     I blew a woofer in my iq-12, how do I go about getting a replacement?

    0 44
    • Dnrbnsn2
      DavidKnighton Hello Dnrbnsn2,
      For replacement parts, please click on the SUPPORT tab at the top of the page and submit a Spare Parts request.
      • Jul 28
  • New
    jt5447
    Newcomer - Level 1
    2021-07-26

    Hello

     
    I'm looking to source wall mounting brackets for a pair of Turbosound Impact 50 speakers. Any of WB-50 (I have one of these already); or SB-50; or SM-50.
     
     

    Can you please assist with where I might locate these. (I'm located in Ireland). Thanks in advance for your help.

     
    read more...
    0 39
    • jt5447
      Nigel67 Hi jt5447. Please contact our Spares Team and they will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. A colleague will then get back to you with pricing and availability. Many thanks
      • Jul 26
  • New
    MarcelNYC
    Contributor - Level 2
    2021-07-21

    I recently purchased an enclosed cargo trailer to haul around the various components of my iQ series system (multiple iQ15 and iQ15b speakers). The trailer gets to around 120 degrees Fahrenheit (50 Celsius) when in the sun. Should this be a concern for the equipment? I don't think so since I'm pretty sure they get hotter when operating outdoors for hours in direct sunlight but I'd figure it's worth asking.

    read more...
    0 40
    • MarcelNYC
      WilliamR Hello, William from Musictribe here. The Ideal long-term storage temperature for electronics is about 45-85 degrees. Anything higher than 120 can cause the glue to start coming apart.
      • Jul 21
      • How much heat is too much when keeping iQ speakers and subs in storage?
        MarcelNYC In a given hot day it’ll be hot for about 6 hours. It’ll peak at 120 during those 6 hours. The rest of the time it will get down to 70. Should I be concerned about those 6 hours?
        • Jul 21
  • New
    Subz34
    Newcomer - Level 1
    2021-07-20

    Hi, I am looking for a pair of turbosound Venue TVX152 but I can not find, can you tell me a reseller in France or in Europe? thank you

    0 43
  • New
    DiegoRivera
    Newcomer - Level 1
    2021-07-14

    QUISIERA COMPRAR EL AMPLIFICADOR DE MI BOCINA Y EL COVER DE EL LOGO. NO ENCUENTRO MANERA QUE ME CONTESTE DE PARTE DE MUSIC TRIBE . SOLAMENTE TENGO UN NEMAIL, COMO QUE VAN A VER EL CASO . SIENTO EL EL SERVICIO ES PESIMO DESDE EL COMIENZO DE LA COMPRA DE MI EQUIPO. HABRA UNA PAGINA SIN TANTOS EMAIL'S QUE PUEDA COMPRAR LAS PIEZAS?

    read more...
    0 40
    • DiegoRivera
      NicJonesMT Hi DiegoRivera.
      Please click support at the top of the page and then select the SPARE PARTS option. You will then be able to submit a spare parts ticket.
      • Jul 14
    • DiegoRivera
      Nigel67 Hi Diego, for spare parts, please submit a spare parts ticket. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. A colleague will then get back to you with pricing and availability. You will receive an automated reply from us with a case number. This is will confirm that we have received your e-mail and it is in the spares queue awaiting answer. Please check your Spam / junk box if you do not see the automated reply in you inbox
      • Jul 14
  • New
    Teknik162
    Newcomer - Level 1
    2021-07-14

    Hello, can you advise where I could buy replacement tweeter to suit Impact 65T speaker in Australia please

    0 35
  • New
    Banjoe
    Newcomer - Level 1
    2021-07-13

    We need our turbo sound sub repaired. Who repairs in the VA Beach area?

    0 31
    • Banjoe
      NicJonesMT Hi Banjoe. If you submit a service request (Click support at the top of the page) The service team will be able to advise you further.
      • Jul 13
Go to page