Statistics

250,906 members
128,125 posts
  • New
    Nathan7
    Newcomer - Level 1
    2021-09-24

    I would like to know if a pre-Sonus studio live mixing Consol will work with Barringer's P 16 monitors?

    0 6
  • New
    jimcelc
    Newcomer - Level 1
    2021-09-23

    Our X32 has the older X-UF expansion board.  I was trying to find the WIndows 10 drivers to interface with the X32 using USB for our livestreaming using OBS.  However, on the Behringer web site, while it lists drivers for the X-UF board, when I go to download the X-UF drivers, the web site tells me that the location is empty.  Can I use the drivers for newer X-USB expansion board instead?  Other alternatives?

    read more...
    0 10
    • jimcelc
      Paul_Vannatto Hi Jim, I would highly advise that you replace that X-UF card with either the X-USB or X-Live card, since the X-UF hasn't been supported for over 8 years, and we've had numerous reports of that card going bad. If you do (for some reason) have to continue to use it, I do have the 6.13 drivers. I'm not sure how compatible it is with Win 10.
      • Sep 23
    • jimcelc
      Dale_M Hi there the X-UF is no longer supported officially, we would advise you consider updating the card to X-USB or X-LIVE.
      • Sep 24
  • New
    brightonbob
    Contributor - Level 2
    2021-09-23

    Hi

    I have noticed that there is now a new Wing USB driver - V5.12.0 (Along with some Dante .dnf files)

    The previously available USB driver version was 4.67. The included text file "TUSBAudio Revision History" lists 5 additional versions between these two releases that were not made available on the main site.

    Q1) Will alll new versions be made available on the main site or somewhere else, if so, where?

    Q2) V5.12.0 is listed as available from May 18, 2021 - is this the latest version - the latest version on the Theyscon web site is 5.2 ?

    Q3) is there a way to get notified (by email) on any updates to Wing software?

    Thanks

    BBob

     

    read more...
    0 9
  • New
    ievent
    Newcomer - Level 1
    2021-09-23

    Buenas tardes, me gustaría saber si se puede utilizar un micrófono de diadema en este sistema con su debido adaptador Jack .

    Gracias

    0 16
    • ievent
      Dale_M The input the for the mic is TRS (tip ring sleeve) so any mic that has this arrangement in theory should work but it would be unsupported, if you were to use a headset which has headphones combined with the mic then this will not work.
      • Sep 24
    • ievent
      ievent

      Ok gracias ?

      • Sep 25
  • New
    darklightyt
    Newcomer - Level 1
    2021-09-23

    Hi all,

     

    I'm new here, but i've got a question regarding the behringer crave. Most synths i own inclusing the TD-3 play a sequence. when i switch to a different sequence it will finish the current one beofre swithcing. i really like this feature since it allows me to keep all the gear rolling during a liveset. the crave however switches imidiately when selecting a different pattern. Can this be altered in the setting or firmware? 

    hope there is a solution since it's pretty unusable for me  at the moment. other solutions are welcome aswell!

     

    thanks in advance!

    read more...
    0 5
    • darklightyt
      PedroRodrigues Hi darklightyt, regrading your statement you are correct, the Crave will switch instantly instead of allowing the sequence to finished first and only then change to a new sequence. Have you tried disabling the SEQUENCER AUTO SYNC when using the latest version of the SYNTHTRIBE ? Thank you
      • Sep 25
  • New
    Strbacka
    Newcomer - Level 1
    2021-09-23

    When will the DANTE card for Wing go on sale?  The salesman told me they weren't.

    0 9
    • Strbacka
      GaryHiggins Are you asking about the internal card? My guess is it will not be any time soon. There is already a backlog on the external version due to many well documented factors. That would be priority to get filled imo. That said there are many users that have installed Brooklyn II 64 ch Dante cards from other manufacturers themselves with great success. Do some digging and you may get rewarded.
      • Sep 23
  • New
    PhiaPhia13
    Newcomer - Level 1
    2021-09-23

    Does anyone know where I  can d/load the correct driver for the TC Electronic Konnekt Desktop 6 firewire interface?

    im now using OS Catalina 10.15.7 in logic on a  Macbook pro

    Any suggestions appreciated.

     

    Steve

    read more...
    0 6
  • New
    rob18
    Newcomer - Level 1
    2021-09-23

    I am going to put MX882 in my home recording output routing, there are: PC -- Yamaha MG10XU -- Behringer MX882 -- Power Amplifier -- Flat (Recording) Speakers.

    The reason I'm using the MX882 because I want to have option speakers (home stereo speakers) to listen and compare the results of my work, so I'll connect another amplifier to another output of MX882 for that purpose.

    The Questions are:

    1. MX882 has balanced outputs (both XLR and TRS), is safe if I wire those to RCA (I mean one TRS/XLR for one RCA)? Or is better if I use unbalanced TS jack to RCA? I read from other forum that I can damage my amp if I wire TRS to RCA and some short circuit come to the TRS jack

    2. Is safe to connect MX882 output direct to passive speakers? 

    Thanks

    read more...
    0 5
    • rob18
      PedroRodrigues Hi rob18, please consider that you should not connect any XLR and 1/4 TRS Jack to a RCA connector in any situation. Please take in to account that to implement the MX882 output you must use full XLR and 1/4 TRS Jack cables to avoid any issues on the unit and nay signal degradation . Thank you
      • Mon at 2:04 AM
  • New
    Ryker5
    Newcomer - Level 1
    2021-09-23

    Hello,

    my KXD12 will nor power on.

    I have replaced the fuse and also the power cord.

    Any ideas or does it require a workshop visit?

    cheers

     

    0 5
    • Ryker5
      WilliamR Hello Ryker, It sounds like your KXD12 will need to be serviced. Please click on the support link above and create a service ticket so we can line this up for you.
      • Sep 23
  • New
    HanVertegaal
    Newcomer - Level 1
    2021-09-23

    Hi, Can someone tell me what type of anti-aliasing filters are used in the XR-18? This information is needed to use the device in accredited measurements.

    0 10
    • HanVertegaal
      Dale_M

      This info can be found in the datasheets of the ADC (Cirrus CS5368) and DAC (Cirrus CS4385) that are used in XR18. This can be searched from your web browser.
      • Sep 24
    • HanVertegaal
      HanVertegaal

      Thanks for the pointer!

      • Sep 24
Go to page