Statistics

261,070 members
139,742 posts
  • New
    palbin
    Newcomer - Level 1
    2021-01-06

    Hello!

     

    I wonder if it is possible to totally bypass DSP in amps IPD 2400 and FP10000Q (and possibly some others similar)?

     

    I suppose it must be but best to check anyways ... .

     

    Best regards

     

    PS. At present I use analogue signal processing of various D/A-processed digital source signals so I don't want to A/D 

    and D/A these signals one more time ... . 

    read more...
    0 117
    • palbin
      DavidKnighton Hello Patrick,
      With Lab Gruppen amplifiers, the DSP is what makes them unique and desirable. There's no way to bypass the internal DSP for those select amps, such as IPD, PLM, LUCIA, and D series. The FP series, C series, and E series amps do not feature built in DSP, so if you want the power of Lab Gruppen without the DSP, then you would choose one of these models.
      • Jan 6
  • New
    audioconcept
    Newcomer - Level 1
    2020-12-22

    Hello
    One of my PLM5K44 has a problem .. DICO COMM FAULt and all inputs light red flashing
    What is it ?
    how can I solve ?
    Thanks

     

    0 81
    • audioconcept
      Dale_M Hi Dominique, given the above information there is definitely a fault with your unit and it will require repair, can I advise you to go to the above support tab and submit a Service ticket so that we can advise you on a repair?
      • December 22, 2020
      • PLM5K44 DICO COMM FAULT
        audioconcept Hello. i have submitted a service ticket, but this amp already comes from your service , he had a PSU problem... this problem has been resolved but now there is another problem.. Maybe it needs a warranty exchange ???
        • December 22, 2020
  • New
    craiggannon
    Newcomer - Level 1
    2020-12-22

    I’m having issues with the Nx3000D in Stereo mode , it’s fine when bridged but only getting 1 side in stereo . Is there a link available for the manual please .

    thnx

    0 96
    • craiggannon
      RexBeckett Hi Owen, you can download the Quick Start Guide by clicking on Documentation on the right side of the product page: https://www.behringer.com/product.html?modelCode=P0CHW
      • December 22, 2020
      • Nx3000d Stereo settings
        craiggannon Many thnx for the response & link , unfortunately it doesn’t solve the problem, here’s a pic of the stereo setting
        • December 22, 2020
    • craiggannon
      DavidKnighton Hello Owen,
      Are you using a single input source or dual input source? In stereo mode, you should have dual input sources to drive each amp channel individually. Bridge mode takes a single input source. Also bear in mind the the output wiring changes when utilizing bridge mode vs stereo mode, so be sure you're using the correct output wiring configuration.
      • December 22, 2020
      • Nx3000d Stereo settings
        craiggannon Thnx David , it’s a dual input from my mixer , yeah the wiring config is correct, it was working in stereo , just decided to stop for some odd reason
        • December 22, 2020
      • Nx3000d Stereo settings
        DavidKnighton Hello Owen,
        I would focus your efforts on the input connector for the suspect channel. If there is a problem with the connector, then the device may require service.
        • 1
        • ·
        • December 22, 2020
  • New
    Lab Gruppen
    Triber Moderator
    2020-12-21

    FAD Series
    http://bit.ly/LabGruppen-FASeries


    Commercial Amplifier with Direct Drive Technology, Dante Networking and Energy Star Certification


    
?http://bit.ly/LabGruppen-FAD602
    List Price: $550

    ?http://bit.ly/LabGruppen-FAD1202
    List Price: $600



    ?http://bit.ly/LabGruppen-FAD2402
    List Price: $650

    #LabGruppen #FAseries #CommercialAmplifier #DANTE

    read more...
    1 274
  • New
    Lab Gruppen
    Triber Moderator
    2020-12-18

    PD3000
    bit.ly/LabGruppen-PD3000 

    Proven and reliable Class-D amplifier and can provide superb audio performance in both background and foreground music sound systems.

    List Price: $599

    #LabGruppen #PD3000 #PowerAmplifiers #2Channel

    read more...
    1 187
  • New
    eightoheight
    Newcomer - Level 1
    2020-12-10

    I have an LM44 and some PLM10000Q's that are on Dante 3.0.1.48 firmware even when running Lake Controller 7 and doing the Lake Update. Is there a way to update this to version 4 firmware for Dante?

    read more...
    0 148
    • eightoheight
      PedroRodrigues Hi eightoheight, unfortunately there is not, as they use the older version Brooklyn one module from Audinate. Thank you
      • Feb 10
  • New
    thxrd
    Newcomer - Level 2
    2020-12-09


    hello, it is impossible for professional products such as PLM + / D series amplifiers etc. to have an after-sales service on a forum by email, by "ticket" and to send the devices to England from France !!
    this is not serious !! your two French Labgruppen distributors have no spare parts and the deadlines are unknown
    ditto to buy amps
    this is a completely crazy policy

    I am a company that installs in cinema and I stop the Labgruppen brand.
    at Powesoft delivery 24/48 h / after-sales service maximum one week and in the majority of cases 3/4 days and so big concert: loan of replacement.

    read more...
    1 106
    • thxrd
      PedroRodrigues Hi thxrd, we are sorry that you feel that way and we are here to assist you in any matter, never the less please consider that all the support is provided submitting the assistance request for support or Spare Parts as you mentioned by following the link below: https://www.labgruppen.com/service.html
      • Feb 9
  • New
    bphouck
    Newcomer - Level 1
    2020-12-05

    Hello Everyone, 

    I have a facility that has distributed audio to multi zones through Control4 System. They stream music from Control4 controller down to a Matrix switch then down to 11 different zones. I need to inject paging from a Snom PA1 PBX adapter. The Control4 Matrix Switch doesn't support this. So I need to break the audio from controller to the matrix. So I need to know if the Zmx8210 behringer will allow me to do this. If so, how to wire it and to what inputs. I think its " ducking " is what I'm wanting to do. Thanks for any feedback. 

    read more...
    0 75
  • New
    Pelle67
    Newcomer - Level 1
    2020-12-01

    Hi!

    Would like some pictures and facts about:

    ► 990692004 (Wall Panel Level Control EU)
    ► 990692005 (Level Control with white knob DIY)
    ► 990692006 (Source Selector with white knob DIY)
    ► 990692007 (Level Control with white knob DIY conn. straight)
    ► 990692008 (Source Selector with white knob DIY conn. straight)

    read more...
    0 103
    • Pelle67
      ChrisEdwards1 Hi Per, additional media/images for the mentioned products can be found via the specific product page. Please follow the link below which will redirect you to the area of the site in which they are listed:

      https://www.labgruppen.com/catalog.html?brandName=labgruppen&catalog=Application&category=P-LABGRUPPEN-INSTALLEDSOUND&itemsPerPage=15&pageNumber=2&sort=salesRevenue

      With regards to the information you require can you please provide some additional information on this?
      • December 1, 2020
      • Wall panel, level control and source selector for Lucia amps
        Pelle67 Thank´s for Your answer!
        • December 1, 2020
      • Wall panel, level control and source selector for Lucia amps
        Pelle67 ... but, the x04 Wall Panel is just documented with a "drawing", would be nice with pictures, as the CRC-series are documented?! Could You deliver a version of the Wall Panel x04, with Source Selector? The x07 and x08 is not documented! What do conn. straight means? Pictures and explanations?!
        • December 2, 2020
      • Wall panel, level control and source selector for Lucia amps
        ChrisEdwards1 Hi Per, Unfortunately, the only further pictures of the Wall Panel we have can be seen in the below link. There are none available like the ones seen for the CRC-series. I have also included in the link the Lucia accessories PDF which you may find provides some additional information you require.

        https://we.tl/t-9S5CKgCygM

        With regards to conn. straight this is just an abbreviation of Connection Straight.
        • December 2, 2020
  • New
    ALLANK
    Newcomer - Level 1
    2020-11-27

    Good day,

    I'm trying to get an amplifier output board for FP14000

     

    0 117
    • ALLANK
      RexBeckett Hello Allan, I think your best option is to open a Care ticket for this. At the top of this page, click Support then scroll down and select Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • November 28, 2020
Go to page