Statistics

229,577 members
104,644 posts
  • Alesr
    Newcomer - Level 1
    2020-10-20

    I wonder under what name PC software for configuring IQ series speakers is availible? And link please. 
    i want to configure crossover and EQ.

     

    thanks

    0 41
    • Alesr
      ChrisEdwards1 Hi Ales Ribic, I hope you are well. The software you require is Turbosound Edit, this is not currently listed on the IQ product pages and I will look into getting it added. It can however be downloaded from the following page - https://www.turbosound.com/turbosound/product?modelCode=P0BMU Just click on the software tab to the right-hand side of the page and the file you require will be "Turbosound Edit PC Version 1.1"
      • October 20, 2020
    • Alesr
      Alesr Many thanks for fast reply. I will try.
      • October 20, 2020
    • Alesr
      Alesr It works. Im able to set all parameters from my PC.
      • October 20, 2020
  • renerod83
    Newcomer - Level 1
    2020-10-19

    I opened a case on a Beheringer amp in 2018 and nobody ever got back to me. 

    I opened a ticket on Oct 5 this month regarding the tweeter on a Turbosound monitor and nobody has contacted me either. Is there a customer service number to call?

    Any help would be really appreciated.

    THanks, 

    read more...
    0 40
    • renerod83
      Nigel67 Hi Rene, I am sorry that your case has not ben answered. Please can you tell me the case number you were given in the automated reply that you received and I will see why it hasn't been answered.
      • October 19, 2020
      • Customer Service
        Nigel67 Is this the case number CAS-144877-S4L2Q1? I see that a colleague has this case in his queue. I will message him and ask him to reply to you.
        • October 19, 2020
      • Customer Service
        renerod83 Thanks, I did get a reply hopefully it will get resolve since I just bought the item in Feb. should be in warranty
        • 1
        • ·
        • October 20, 2020
      • Customer Service
        Nigel67 Hi Rene. Yes, it should be under warranty if you are the first owner. Have a good weekend.
        • October 22, 2020
  • MarkMcGreevy
    Newcomer - Level 1
    2020-10-19

    Hi, i was wondering if Turbosounds sells a replacement handle for a IQ18b, i have only had it for about 3 years but can't seem to find the original sale reciept for the warranty   Thanks

    0 50
    • MarkMcGreevy
      RexBeckett Hi Mark, I suggest that you open a Care ticket for this. At the top of this page, click Support -> Create a Care Ticket and select Type: Spare Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • October 19, 2020
    • MarkMcGreevy
      MarkMcGreevy I opened a case CAS-149014-G8V6X5  but not sure if I waited to long to respond..
      • October 31, 2020
      • Turbosound IQ18b
        RexBeckett The Care team usually respond within 2-3 working days. Keep watch on your email spam/junk folder.
        • October 31, 2020
  • Dylanb13
    Newcomer - Level 1
    2020-10-17

    My IP3000 loses the top with working lows, along with the fact that the speaker came with the tweeter horn broken. I have not received any correspondence to attempt to figure out the issue or be able to fix the problem. Looks like I may have to suck up the cost and go buy a Maui. I wanted to give turbosound a chance, but it seems the customer service here is garbage other than someone to answer these messages and act like the company really gives a crap when they don't....

    read more...
    0 40
    • Dylanb13
      ChrisEdwards1 Hi Dylan, do you currently have an open case with us? If so could you please share your case number and I would be more than happy to investigate the current status of your case.
      • October 18, 2020
    • Dylanb13
      DJ898228 I have the same issue! ! ! Did you get it repaired? Is there a fix?
      • November 30, 2020
  • Rhapsody
    Newcomer - Level 1
    2020-10-15

    no lows being reproduced. checked spkrs, -ok

    0 32
    • Rhapsody
      Nigel67 Hi Howard. We can definitely help you with the repair, but we need you to submit a service request ticket. One of my colleagues will then be able to advise you how we go about repairing your unit. If you can go to the Support tab at the top of the page and submit a service request ticket. Many thanks
      • October 15, 2020
  • Rhapsody
    Newcomer - Level 1
    2020-10-15

    no low output -mid/his are fine - speakers are fine

    0 31
    • Rhapsody
      Nigel67 Hi Howard. We can definitely help you with the repair, but we need you to submit a service request ticket. One of my colleagues will then be able to advise you how we go about repairing your unit. If you can go to the Support tab at the top of the page and submit a service request ticket. Many thanks
      • October 15, 2020
  • Rhapsody
    Newcomer - Level 1
    2020-10-15

    I have an ip1000 pa system . The sub woofer is not reproducing any lows. I checked the sub speakers - OK..

    The mid/hi pack is ok .. It is definatley the sub. If you can send me the circuit board , I can replace it here.

    0 23
    • Rhapsody
      Nigel67 Hi Howard. We can definitely help you with the repair, but we need you to submit a service request ticket. One of my colleagues will then be able to advise you how we go about repairing your unit. If you can go to the Support tab at the top of the page and submit a service request ticket. Many thanks
      • October 15, 2020
  • TrevorCronin
    Contributor - Level 1
    2020-10-01

    Hi there, is there a portal for downloading all the Ease data.dll for all current Turbosound proucts?

    We would like to design some new Turbosound systems with Ease, easily...

    What I find is not many products represented and not compatable with the latest version of ease.

    Sound around Myanmar

    read more...
    0 44
    • TrevorCronin
      AlexLane Hi Trevor, most will run on EASE 2 with some of the newer ones working on EASE 3. You can download the older versions of EASE on the AFMG website. Unfortunately updating discontinued models to the later versions is not a viable option.

      Most of the .GLL files may require the full paid version of EASE to run FYI

      I will email you with a link to my archive of Turbosound EASE files, the vast majority of them are in there!
      • October 1, 2020
  • Rhapsody
    Newcomer - Level 1
    2020-09-30

    PLEASE HELP

    I own Rhapsody Music in Mankato Minn. I Sold a customer an ip1000 Turbo sound speaker system 5/26/2018. I understand it has a 10 year wrnty so I am reaching out to you to determine how to get it repaired.  I checked all connections and cables.. Top works fine but NO LOWS. I checked the low speaker itself and spkr is fine so it must be in the circuit board / amp/crossover.

    I could repair it here if I can get parts from you or I can ship it to you . If I ship it to you -do you need the entire cabinet or just the circuit board ??

    Thank you 

    Howard Mock

    Rhapsody Music

    326 Madison Ave.

    Mankato, Minn.

    507-387-2562

     

     

    read more...
    0 34
    • Rhapsody
      WilliamR Hello Howard, Please click the support link above and create a service ticket, and someone will get back to you ASAP.,
      • September 30, 2020
  • anzysc
    Newcomer - Level 1
    2020-09-30

    I only want to register my new Turbosound ip2000 speakers.... What do I need to do? It doesn't show up on this page. This took forever just to crfeate an account. Considering I am an IT professional this could be a better site.

    0 52
    • anzysc
      DavidKnighton Hello Michael Anzalone,
      Sorry for your frustrations. We do appreciate the feedback and will strive to make the site a better experience for all in the future.

      To register your product, head to the top of the page and click SUPPORT. Scroll down on the support page and you'll see a tile labelled 'Product Registration'.
      • September 30, 2020
    • anzysc
      DavidKnighton
      • September 30, 2020
Go to page