305,629 members
189,949 posts
  • New
    Newcomer - Level 1

    Hello, I'm new here.

    I just received a Behringer PK112A powered speaker. It's great, everything works fine. I will be using it primarily for small private jazz gigs. I play guitar and my quartet usually has guitar, bass, drum and horn (sax, trumpet, trombone).

    I bought the PK112A for use with a microphone for vocals/horn players (my bass player sings). I also really like the fact that there is more than 1 input, just in case my guitar amp stops working at the gig. 

    There is however one suggestion I'd like to make to the folks at Behringer. It'd be super cool if the PK112A had a built-in digital reverb effect. That's really the only effect I'd add since vocals really sound great with a little reverb. And, just this one simple small addition would put Behringer miles ahead of any competition for powered speakers. 

    As it is, now I'm stuck with trying to figure out how to add reverb to the microphone without lugging a bunch of other stuff around with me. 

    Anyway, I just thought I'd pass this idea on for consideration. 


    0 7
    • Feloniuspunk161803
      Nigel67 Hi Feloniuspunk161803. Many thanks for your customer feedback and product enhancement suggestion. I will raise a ticket and pass this on to the design team for discussion. All the best.
      • Aug 7
  • New
    Newcomer - Level 1



    am I missing something or is there no option to stereo pair these speakers? 

    also, where can I find a full manual? The QuickStart guide doesn't cover the settings at all 

    0 114
    • Ceriffwrdd
      PedroRodrigues Hi Ceriffwrdd, thank you for your post, please consider that you are correct , the Behringer DR115 DSP does not allow pairing in a stereo configuration via Bluetooth. Thank you
      • October 16, 2021
      • Behringer DR115DSP bluetooth question
        Ceriffwrdd That’s really disappointing, I might just send them back
        • 1
        • ·
        • October 16, 2021
  • New
    Newcomer - Level 1

    I like the Inuke Boom Juniro speaker very much, but the used seller said that the product is stock brand new, but after the power is connected, the speaker does not work. It may be the aging of the original circuit. Do you want to ask if there is a circuit diagram? I'd like to buy a repair after trying. I looked on the internet for a long time but couldn't find the circuit diagram. 

    0 21
    • Ccxs
      Ccxs Or do you have spare parts for this speaker? Will replacing one make it any better?
      • September 26, 2021
    • Ccxs
      Nigel67 Hi Ccxs. I am sorry, but it is company policy that we are not permitted to distribute circuit diagrams. For spare parts, please send a ticket to our spares team and they will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. Many thanks
      • September 26, 2021
  • New
    Newcomer - Level 1

    Does anyone know how to upgrade the firmware on my MPA 200BT with IOS or Mac?

    0 113
    • MarioLento
      NicJonesMT Hi MarioLento
      Unfortunately I dont have access to the MPA at the moment as we are all working from Home still, but I Don't think it is possible from an Apple device.
      You could try sending the FW file to the speaker via Airdrop however I do not think this will work.
      Your best option would be to try and get your hands on an android device to perform the update.
      • February 21, 2021
    • MarioLento

      To update firmware from a MacOS device, 1. download the firmware file from Behringer downloads site for the MP200BT. Save file to a place you can access later. 2. Press the volume knob on speaker as you turn on the speaker. Press the knob again when speaker display says, update firmware. This will put the speaker in receiving mode. 3. Open the Bluetooth File Exchange utility on the MacOS device. In file menu, select “send file.” Navigate to the firmware update and select it and press send. Select the desired MPA device from the list and press send. 4. The MacOs device should show the speaker being paired for bluetooth, and the speaker display should eventually show the firmware downloading and updating. (Note that this worked well for one speaker and never paired with the second speaker and showed an error message. However, using the updated speaker as the master unit, this update fixed the issues I was having playing a stereo mix through the speakers over BT.)

      • Jun 4
  • New
    Newcomer - Level 1

    Hello, I have purchased a behringer Europort mpa100BT. Something's cracked inside, I can't connect via usb. Can I fix this somehow?

    0 233
    • Pavlo
      ChrisEdwards1 Hi Pavlo, please note if you are trying to connect the speaker to a laptop this will not work as the USB is for use only with a wireless receiver dongle.

      With regards to the crackle is this noise appearing when playing music via both inputs and even streaming over MP3? If so I would recommend you submit a service request ticket by going to support at the top of the page and scrolling down to the required section.
      • January 14, 2021
    • Pavlo
      Pavlo Hi)connected via bluetooth from various devices, does not work. The bluetooth button does not light up. I'm just in Africa and it's problematic for me to apply for a service. Please tell me, I can buy all the bluetooth board to replace it and how much will it cost
      • January 15, 2021
      •  behringer Europort mpa100BT.
        ChrisEdwards1 Hi Pavlo, thanks for your response. For parts availability and pricing please submit a parts request ticket following the same method as mentioned for a service request, however, please choose parts.
        • January 15, 2021
  • New
    Newcomer - Level 1

    My Europort won't turn on. Tried replacing fuse but still nothing. Need to know where to take it for service.

    0 87
  • FresonK
    Newcomer - Level 1


    Ik ben door baxmusic doorverwezen naar deze site, het juiste verloop om jullie te contacteren heb ik meermaals nagevraagd bij hun maar niet gekregen. Bij deze hoop ik dat mijn vraag die ik hier stel gelezen wordt.

    ik heb op 21/06/2020 een behringer aangekocht bij Bax en heb deze 3x kunnen gebruiken en de 4de maal kwam er enkel gerommel uit de box, bij deze was hij al defect op 21/07/2020 en heb ik pas 25/08 contact kunnen opnemen bij bax, dewelke dus niet meer kunnen doen dan mij doorverwijzen naar deze site en hoop ik op deze weg op een reactie dat zal leiden tot een werkende luidspreker.

    Gelieve in bijlage de ordernummer terug te willen vinden.

    Zou u mij kunnen helpen met de herstelling van deze luidspreker aub?


    Kevin Freson

    [email protected]

    0 222
    • FresonK
      WilliamR Hello Kevin, please go to the support tab at the top of the page and submit a service request ticket. Someone will be able to help you out with this.
      • September 23, 2020