Statistics

229,714 members
104,806 posts
  • New
    Newjin
    Newcomer - Level 1
    2020-12-24

    Trying to find and navigate the site to order dust cover for my tannoy cheviot hpd315a 1976

    Any help would be greatly appreciated  ? 

    Thank you In advanced 

    0 40
    • Newjin
      ChrisEdwards1 Hi Nam, I hope you are well. Unfortunately, we do not manufacture or stock dust covers for this model, in this instance we would recommend speaking with your local distributor who may be able to recommend a company that custom makes them to order.
      • December 23, 2020
  • New
    joysec1
    Newcomer - Level 1
    2020-12-21

    I own one old Tannoy Glenier 10 and my friend has one Monitor Gold 15(Vintage model). We need spare tweeter pair for our speakers as the existing ones are old and may get defective anytime. These two models are not listed in MT spare list. Is there any other alternatives?

    read more...
    0 40
    • joysec1
      Nigel67 Hi Sanjoy, please goes to the support tab at the top of the page and submit a spares request. One of my colleagues will then get back to you with pricing and availability. If your speaker is not available when you select a product, please select any product and then add a note in the description which type of speaker it is and what you require and we will pick this up. Many thanks
      • December 20, 2020
    • joysec1
      joysec1 Thanks a lot Nigel. I hv already done that
      • December 22, 2020
  • New
    gerard33
    Newcomer - Level 1
    2020-12-18

    Hello - I have just joined this group. I need a replacement tweeter for my Tannoy Mercury M2 speaker, please.

    Could anyone help me? Or even direct me to somewhere I might get one.

    Thank you in advance - Gérard

    0 46
    • gerard33
      RexBeckett Hello Gerard. I suggest that you open a Care ticket for this.

      At the top of this page, click Support then scroll down and select Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • December 18, 2020
      • Replacement Tannoy M2 / M3 tweeter required please
        gerard33 Thank you Rex - I have now just submitted. fingers crossed ☺
        • December 18, 2020
  • New
    Egan
    Newcomer - Level 1
    2020-12-08

    Hello

    iam trying find a replacement 7" speaker for one of my tannoy sensys dc1. The speaker rattles loudly during some low frequencies. The outer ring of the speaker shows no damage. Coil issue perhaps. 

    0 62
    • Egan
      KyleJohnson Hi Brian, Kyle here with Music Tribe. You can contact our parts team by clicking on the Support link at the top of the page, then scroll down and select Spare Parts.
      • December 8, 2020
  • New
    Geoffgiligan1
    Newcomer - Level 1
    2020-11-24

    Hi, I have a pair of Tannoy 605 speakers one of which has blown the bass driver, I am looking for a replacement, the stock number on the rear of the driver is Tannoy 1661, are there any available please .         Thanks 

     

    0 79
    • Geoffgiligan1
      ChrisEdwards1 Hi Geoff, Unfortunately, due to the age of this model the parts you are requesting are now either discontinued or obsolete; In this case, we would recommend getting in touch with Lockwood Audio.

      Lockwood audio have been used by Tannoy for many years for servicing vintage Tannoy and supplying obsolete parts:
      www.lockwoodaudio.co.uk

      Alternatively please try the following eBay seller who stocks various old/rare components:
      http://stores.ebay.co.uk/mainlytannoy
      • November 24, 2020
  • New
    AJMcGinnis
    Newcomer - Level 1
    2020-11-20

    Hi, I have an old pair of Tannoy Cheviots and wondered if anyone would have advise on ways to carefully/repectfully upgrade them.  They have had new surrounds installed and seem to work well though the surrounds are installed with a convex roll contrary to original and the spiders are slightlypushed in at rest.  I wondered if you thought that might be contributing to slightly inarticulate bass.  I use a Sony TA-N77ES 200w/ch high quality ampliier.

    I wondered also if there are any weak spots that could be improved now after 45 years, such as internal wiring, binding posts, bipassing attenuators, etc, as many seem to speculate and experiment with.

    I truly respect the design and they do sound wonderful.  I want to make sure I am doing them justice if anything obvious may be holding them back now as technology allows.  Any thoughts are much apreciated!  Thank you and Happy Friday from Fredericton, New Brunswick, Canada.

    read more...
    0 39
    • AJMcGinnis
      PedroRodrigues Hi, Joe We appreciate your contact and your commitment on your units but unfortunately we do not provide any technical details to end user nor we advise any self repair, I would suggest contacting one of our partners and request the upgrade. To acess our network of partners and resellers, please follow the link below https://www.tannoy.com/buy.html?isoCode=CA&type=STORE . Thank you
      • November 23, 2020
  • New
    Frank1961
    Newcomer - Level 1
    2020-11-20

    My speaker cables have two plugs. Does it matter if I connect them to LF + and use the bridge cables to connect to HF +or vice versa?

    0 46
    • Frank1961
      ChrisEdwards1 Hi Frank, would it be possible to provide some further information on your setup? such as the amp being used, if you plan to wire them single wire, bi-wire, or bi-amp and if possible the make and model number of the cables being used. Thanks in advance.
      • November 24, 2020
  • New
    vinylvibe1
    Newcomer - Level 1
    2020-11-12

    Can anyone advise where the reference point is on the Legacy Eatons? Asking as I'm trying to work out correct stand heights ahead of receiving the Eatons. Thanks

    0 27
    • vinylvibe1
      ChrisEdwards1 Hi Me Myname, If you are referring to the recommended listening position then we recommend 1m from any sidewall
      or reflective surface and at least 0.5m away from a rear wall. The tweeter should be roughly at ear height at your listening position. Some user will use stands which tilt the speakers back to achieve this, however, we cannot confirm if this would be a more suitable option or not as it is more down to user preference.

      If this is not the information you require then please feel free to expand further.
      • November 12, 2020
    • vinylvibe1
      vinylvibe1 Thank you Chris. That answers my question.
      • November 13, 2020
  • nikleica21
    Newcomer - Level 1
    2020-10-26
    0 32
    • nikleica21
      nikleica21 Please help me ! Need advice on (1) how do I remove my speaker grille with the lock in this condition? (2) how can I get this faulty part ordered and self-replaced and any instructions on doing so? Thank you so much.
      • October 26, 2020
    • nikleica21
      JasonB81 Hello - The best move would be to open a support ticket under the support link above and we can help you get the part you need and guide you toward a solution after a deeper dive into the issue. Thank you
      • October 26, 2020
      • Remove and replace faulty Kensington SE speaker grill lock
        nikleica21 Thanks Jason! I have done that and fingers crossed, I will be able to get this resolved.
        • October 26, 2020
  • sgordoxyz123
    Newcomer - Level 1
    2020-10-25

    I have been very impressed and happy with my Turnberry GR speakers. I have them connected to a Primaluna EVO 400 preamp and 2 EVO 400 powers amp. I also have 2 REL S/5 SHO subs. I have been thinking to upgrade to the Kensington line but don't have a good place to compare them. What are the main features I should expect with this change? the investment is considerable so there should be a distinct difference.

    read more...
    0 46
    • sgordoxyz123
      ChrisEdwards1 Hi Skip, I hope you are well. The main noticeable difference between these models can be found within their power handling and frequency response, the following link will provide downloads for both of the manuals for each model. The specifications for both models can be found on page 46 https://we.tl/t-T0ZXtLWW2d. It is also highly recommended that you consult with your local dealer about a possible demo, a list of our international resellers can be found by the following link -https://www.tannoy.com/buy.html.
      • October 26, 2020
Go to page