Statistics

240,857 members
117,076 posts
  • New
    TR00PER
    Newcomer - Level 1
    2021-05-17

    As I can't seem to find in early discussions....

    I want to control my MR18 with a XTouch compact.

     

    IF any topics related to my question, please put the link in reply. I can't be the first one to try this :-)

     

    I can make any wifi connections from ipads, laptops to my MR18

    I can change some settings in the X-touch editor.

     

    Do I really need MIDI cables to run from X touch compact to MR18, or is it possible over 1 USB cable?

    How can I change 1 fader to control a stereo channel on the MR18.

     

    Any suggestions are welcome,

    thx

     

    read more...
    0 39
    • TR00PER
      NicJonesMT Hi TR00PPER,

      Yes you will need to connect to the MR18 using MIDI cables and then configure XTC to the MIDI implementation of the M air.

      If you wanted to connect wirelessly then you would need to use the full size X-Touch in the XCTL protocol, which has been designed to work with X/M Air Mixers.

      The only alternative that I can think of would be to use a third party software called OSIMIDI (We do not support this) Which converts MCU messages to General MIDI VIA USB.

      If you need further support please submit a technical support ticket.
      • May 18
  • New
    TatsuyaNakamura
    Newcomer - Level 1
    2021-05-16

    Hello,

    This is the problem I encountered.

    When I connect the Hub4(v2.9) to the M32C(v4.0.6), the recognition is ambiguous.

    On the iPad(M32-Mix v3.1.0 build a3.1.0.1), it shows as normal.

     

    The cause may be that the iPad app has stopped updating and is older than the Hub4.

    Has anyone else encountered the same problem?

    I'm using a translation tool to post this.

    read more...
    0 38
  • New
    thoward
    Newcomer - Level 1
    2021-05-14

    Hi
    I have a Midas Venice F32 where the power supply is making a whining noise and it is being induced in the audio busses.
    I raised a support ticket to see if a replacement PSU is available on 5th May but not had any response yet

    Ticket no CAS-450985-P9Z8V1

    Any pointers welcome

    read more...
    0 32
  • New
    DanR909
    Newcomer - Level 1
    2021-05-13

    Hello,

    We have an M32R with Dante card inserted. The firmware is upto date on both the desk and dante card, we have an X32 rack with Dante card behaving as expected and numerous other devices on the network happy with clock and working correctly.

    When the M32R is set to take it's sync from the expansion card we see pops and clicks appear on channels 1>16. What's odd is that these channels are set to be the analouge inputs. We've tried plugging an AES50 link in between the X32 rack and M32R to see if it can clock to the AES50A input, but when we set it to sync to this, we just get full scale noise on any channel with an assigned input. The noises only go away when the desk is set to sync internal.

    Everything is set to 48k and the sync status next to C:Dante is green, suggesting it is happily locked.

    The fact we are seeing issues when clocking to anything other than internal suggests it could be a fault with the desk opposed to card.

    Has anyone got any suggestions?

    Thanks,

    Dan

    read more...
    0 48
    • DanR909
      GaryHiggins I would drop back to the previous M32 firmware (most current I believe is 4.06 so it might be 4.04.1 before it) I might first try reloading 4.06 one more time just to sure it all went as planned. There is a fairly recent X-Dante firmware update also, within the last few months...assume you did that too. I would also try to reseat the Dante card, worth a try.
      • May 13
    • DanR909
      DanR909

      Thanks Gary, do you know where I might find older firmwares?

      • May 13
  • New
    vvish
    Newcomer - Level 2
    2021-05-12

    Hey Guys

    We have some questions for you.

    We are designing an exhibition hall system. The internal audio system, lighting system and LED system all need to be controlled by the central controller. Can the M32 be controlled by the central controller? If so, by what method? Can it be through MIDI or Ethernet?

    read more...
    0 39
  • New
    GaryHiggins
    Superhero - Level 1
    2021-05-11

    To whom it may concern. I lost probably 3 (maybe 2 or could be 4) posts I made yesterday. Not a huge deal, life goes on and I'm still drawing air BUT when someone makes an effort to help another user, it would be great if it at least showed up...right or wrong! Something similar happened a few weeks ago but seemed to get fixed. Not sure if it's just me and it was a one of or it's happening to others as well. Thanks

    read more...
    2 63
    • GaryHiggins
      Nigel67 Hi Gary, sorry to hear that your posts are going missing. I will get on to the Community Team. Were these posts to questions that hadn't been answered yet or was it when you were replying to someone who had replied to an answer you had already given? Many thanks
      • May 11
    • GaryHiggins
      GaryHiggins

      • May 12
    • GaryHiggins
      GaryHiggins

      To my point I just edited my response and it didnt "take" instead a blank post!

      • May 12
    • GaryHiggins
      GaryHiggins

      It might be related to edits...

      • May 12
    • GaryHiggins
      GaryHiggins As a matter of fact it deleted my entire response and left a blank (just below Nigel67) I had already answered him (thanks Nigel) so it WAS there hours ago and I was just adding more info to it...and POOF all gone! Bye Bye, See Ya!
      • May 12
  • New
    Regie
    Newcomer - Level 1
    2021-05-11
    How to have a good configuration between an HD96/24 and a DL251 ? When I try to connect both together, using the "patching/add new/autodetect" topic in the HD96, I have 2 DL251, both in "active - partial" status. When I use the I/O update manager in the Heritage, I can see that the DL251 is in "HD 0.18.0" version but I don't know what is this version ? When I try to update directly the DL with a PC and MIDAS-IO-Updater-v1to set-up the last firmware "PROXG3.4.6rel-9 " I have a "communication failed" message during the update and no possibility to know the firmware version in the DL. When I connect the DL to a mac with the IP adress, I can only see few information (see in the screenshot linked to this message). Is there someone who can help me to understand what is the problem and if its coming from the HD96 or from the DL251 ? Many thanks for the help
    View Attachment
    read more...
    0 53
    • Regie
      ChaseMcKnight Hi Regie,


      Firmware HD 0.18.0 is the correct version for the DL251 to work with the HD96. Are you connecting the two DL251s via the four local AES50 ports or from one of the Snake Ports / DN9680?

      What firmware version is the HD96 on?
      Do you have green lights at the DL251? How about at the HD's AES50 ports?
      Are you able to manually configure the DL251 ports in Patching? (instead of auto detect)

      On the HD, please verify settings in Preferences / Console Configuration / DSP Configuration:


      Clock Options set to Master

      SuperMac redundancy is turned OFF
      HyperMac redundancy is turned OFF

      On DL251, please verify:

      DL251 are on different IDs (1 & 2)
      DL251 front panel settings:
      Clock External

      Sample Rate 96kHz

      Control Mode 1

      If your settings are correct and are still unable to connect, please open a ticket so we can troubleshoot deeper.

      

Thanks,
      • May 11
  • New
    Gruohm
    Newcomer - Level 1
    2021-05-11

    Hi, 

    just installed an H3000 desk in my studio. Love the sound, love the workflow but it's a bit loud for studio use. The power supplys are in a different room but the board's fans are a bit to noisy to my ears. Heard of someone who modified or changed the console's fans to make it quieter?

    read more...
    0 40
    • Gruohm
      Dale_M Hi there, we have no information regarding this as modifying any safety feature (such as cooling) is prohibited -the Heritage range were aimed at live sound so fan noise would not have been a consideration. However, given the age it is not impossible that quieter fans are available, it may be best to speak to users on the Facebook group "Long Live Midas Analogue Consoles" as many users have flipped these consoles over to studio work. I hope this helps.
      • May 13
  • New
    SuneSchack
    Newcomer - Level 1
    2021-05-09

    Hey guys,

    I have the M Air app on my iPad controlling my MR18. Trying to install the M Air app on a new iPad, I get an error saying that app is gone?! What app is the official Midas MR18 controller app? Are you gonna upload a newer version?

    What should I do. I need my M Air app on another device - and I cannot download it....
    Also not from previous download (even on the same Apple ID)...
    Please help....

    Sune

    read more...
    0 85
    • SuneSchack
      Paul_Vannatto Get Mixing Station. Its a much better app.
      • May 9
    • SuneSchack
      Paul_Vannatto For your info, M-Air-Edit is a completely different app than the M-Air app for the iPad. Also Mixing Station is available for the Mac, PC, linux as well as for android and iPad. But Mixing Station, as well as M-Air for iPad and android are designed as a mixing app, whereas M-Air-Edit (for PC, Mac, linux and Raspberry Pi) is designed as an editor - very different design and functionality.
      • May 9
    • SuneSchack
      Nigel67 Hi SuneSchack. The M-Air app has not been worked on for a number of years now and has been replaced by the MX-Q app.
      • May 9
    • SuneSchack
      DaveMorrison dev-core makes Mixing Station for Mac and Linux too. Get it here: https://dev-core.org/mixing-station/
      • May 10
    • SuneSchack
      micdim

      Hi Sune! Ok the M Air App for iPad is up and running again! They had issues with the App and Apple Terms etc, and has been fixed. Search for it under M Air. Seems Tech support gave me incorrect information and has since apologized. However the version is still the same 1.6.5, so not sure if it works on the Newer iPad M1 Chips? Try and see if you can download it.

      • May 10
  • New
    pdoles
    Newcomer - Level 2
    2021-05-09

    I just purchased an MR18 and I would like to transfer the settings from my MR12 over.  I am using the Android M-Air app connecting to each mixer via access point.  I've tried saving a Show and Scene from the MR12, then switching my wifi to the MR18.  When I then connect to the MR18, the Show and Scene no longer display in the files folder.  My understanding is these are saved to the android device and not the mixer, so what I am doing wrong?  do I need to use a PC instead for this?

    Thanks for any advice!

    read more...
    0 41
    • pdoles
      Paul_Vannatto The android M-Air app is an older version of Mixing Station. Both apps use separate folders for each X-Air model. If you have a file manager, you can go to the Home folder where there should be a folder for the M-Air app (not sure the name, MixingStation is for Mixing Station). Inside that folder will be folders for each of the console models. Simply copy the files from the MR12 folder to the MR18 folder.
      • May 9
Go to page