Statistics

250,609 members
127,789 posts
  • SebRoth
    Newcomer - Level 1
    2020-10-15

    Hello guys i have a question regarding some spare parts for the Midas Venice F Mixing Desks. I need at least one new channel fader and the master fader could be change for a new one as well. Normaly changing a fader is no problem but from what i can see all the fader of the Venice F Series are mountet to a pcb borad.

    My question before i disassemble the mixer. Are there any spare parts avalaible and if yes where? If not it would be awesome to have a Service Manual for this mixer because i cant find it? The Midas website only provide the Operation Manual. If there is no Service Manual for dl it would be awesome if someone knows what kind of fader (manufacturer) i could use to repair channel one and the master channel.

    I really dont want to buy a second Venice F Series to have enough spare parts for the future. The desk is still pretty awseome for its size and the price so it would be a shame if its not fully working.

     

    Thx

     

    Sebastian

    read more...
    0 56
    • SebRoth
      Paul_Vannatto Hi Sebastian, I would suggest you submit a service/parts ticket by clicking on the Support menu (above). Someone will get back to you regarding your requested parts.
      • October 15, 2020
      • Midas Venice F16
        SebRoth Thanks Paul. I will give it a try.
        • October 15, 2020
  • thankey
    Newcomer - Level 1
    2020-10-07

    Hello All,

    I'm looking for the Service Manual of Behringer Mixer Model XENYX QX1622USB.

    Can anyone tell me where can I find it?

    Thanks in advacne!

    0 62
  • pob579
    Newcomer - Level 1
    2020-10-07

    Hi,

    I have an old Eurorack UB1204 PRO.

    Suddenly, +48V led came up (red). The switch for the this (condensor mike is in OFF and always was).

    There are no microphones connected just line in and guitar jack.

    What could be the cause... is it dangerous :) ? 

    Should I do something inside for completely turning off this heck.

    Please advise.

    Thanks.

    read more...
    0 78
    • pob579
      Nigel67 Hi Mike, I would suggest getting hold of a multimeter, or a friend with a multimeter and measuring DC voltage across pins 1 and 2, then 1 and 3 of the mic XLRs and seeing if you are getting a reading. You shouldn't be measuring any voltage at all. If you do get a reading of 48 volts, then I would say that the switch on the rear has possibly broken. If you are not getting any voltage, then it could just be one of the components that switches the LED on. If you unplug your condenser microphones and whatever else is connected to the mic XLRs and switch the 48Volts on, confirm there is voltage on the pins and then switch it off and re-measure across the pins (after a while as the voltage needs to decay away) and there is no voltage, then I think it is safe to say the fault is on the circuitry that lights the LED. I would say that if you know a mate who can repair your console for free, then get him to take a look at it, otherwise if you are the only user, and you always make sure the 48 volt switch is off before you start work, then maybe leave it as it is because the repair and shipping will probably cost a lot more than the mixer is worth. Hope this helps
      • October 6, 2020
    • pob579
      pob579 Hi Nigel, thanks for the answer... The result: switch OFF - 1-2 and 1-3 shows 32V.
      • October 7, 2020
    • pob579
      pob579 Switch ON - 53V. I guess this thing should go straight to the garbage. And is dangerous. Who knows what will be next when the voltage will jump on other inputs. Sure i can seal the 4 mikes ins. But the risk for damaging or even fire is there.
      • October 7, 2020
    • pob579
      pob579 What do you think
      • October 7, 2020
      • +48 volt led is up
        Nigel67 Hi Mike, yes that doesn't sound great. You shouldn't have any voltage between those pins with the phantom switched off. Looks like an internal hardware fault. Possibly some switching transistors. Would need to check the drawings. You wouldn't be able to get the voltages on any other connectors apart from the XLRs, but I don't know what damage they could do to your dynamic microphones if you have any or infact any audio equipment that you plugged into the XLRs. I wouldn't like to comments on the fire hazard but the faulty components would have to get very hot to cause a fire and draw a lot of current.
        • October 8, 2020
    • pob579
      pob579 Nigel, thanks for clear idea. I thought the same... It goes to the garbage and replaced by little Mackie used for small gigs :).
      • October 8, 2020
  • Rakiem
    Newcomer - Level 1
    2020-10-05

    Hi my friends at Music Tribe
    As mentioned earlier; I am a Behringer Fan.
    I want to register my mixer to extend the warranty.
    I want to register the mixer a Behringer XENYX Q802USB.
    Bought on 13-07-2020 at Bax-shop.nl
    What do I need to do more or will it cost me extra?
    I hear from you.
    Sincerely,
    Rakiem
    Do not mind my English, is translated via Google.

    Oh yeah! My login details remain the same.

    read more...
    0 130
    • Rakiem
      RexBeckett Hi Rakiem. Here's how to register your purchase: At the top of this page, click Support -> Create a Care Ticket and select Type: Product Registration. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • October 5, 2020
  • 阳光audio
    Newcomer - Level 2
    2020-09-29

    UMC202 怎么设置成1进2出呢 

    0 117
    • 阳光audio
      Nigel67 Hi, please could you explain a little further as to your issue. What are you trying to set as 1 in 2 out? Many thanks.
      • September 30, 2020
    • 阳光audio
      阳光audio ?
      • October 9, 2020
      • UMC202 怎么设置成1进2出呢
        Nigel67 Input 1 will only be heard out of the 1(L) when you press the Direct Monitor switch. Just like input 2 will only be heard from the 2(R) output
        • October 14, 2020
  • Midas
    Newcomer - Level 1
    2020-09-28

     

    Sound Engineer John Delf gives us a tour of Edge Recording Studio and shows us his favourite bits of Midas gear with cameo appearances from Klark Teknik and Behringer. 

     

    read more...
    0 63
  • pedalbin
    Newcomer - Level 1
    2020-09-25

    Hi, we have recently purchashed the above mixer so that we can deliver a live radio programme to a local community radio station from our home.

    We are using a piece of software called Broadcast Using This Tool (BUTT) to connect with the gear in the radio station studio from our home pc using the mixer.

    We have a mic connected in channel 1, the USB port is connected to our pc using the supplied cable, the 2-track inputs are connected to the headphone socket on the pc, and we have headphones attached to the phones socket.

    On testing this we can get the required level of volume we need on BUTT using the microphone,but when we play music from the pc we can hardly get any volume despite turning everything up to max.

    We have tried using a friends Behringer Xenyx Q502USB mixer and this works fine. The difference with the two mixers are that ours has 2 mic channels and the USB/2-Track area has push buttons marked as -USB/2-TR TO PHONES/CTRL RM and USB/2-TR TO MAIN MIXER, the other mixer only says TO PHONES and TO MAIN MIX.

    We have tried all combinations of pushing the buttons in and out but nothing works, so any advise would be appreciated as we are wondering if it is faulty.

    We are not techically minded so any advise we need to be very simple.

    read more...
    0 64
  • Caught exception: Specified column "user_id" is not in the row
  • dbbattaglia
    Newcomer - Level 1
    2020-09-23

    Hello,

     

    anyone knows the procedure to setting the Multirack waves with Midas Venice F32 desk to using wawes in Live Concert?

     

    Thanks everybody for the help

    0 85
  • KirillPavlov
    Newcomer - Level 2
    2020-09-23

    Dear Tribers!

    As it's indicated in manual for X2222USB, this mixer has rack-mounts included. But my client couldn't find these mounts inside the box. So the question is: are these mounts still included or there is some change in complete set?

    read more...
    0 52
    • KirillPavlov
      Dale_M Kirill I would advise you raise a support ticket and one of the team can organise sending these to them.
      • September 23, 2020
      • X2222USB
        KirillPavlov Thanks, dear Dale! It means mounts should be included, right? And it's unfortunately really difficult to send something to Russia.((( I will give them to customer from another box then.
        • 1
        • ·
        • September 23, 2020
Go to page