Statistics

261,065 members
139,737 posts
  • dbbattaglia
    Newcomer - Level 1
    2020-09-23

    Hello,

     

    anyone knows the procedure to setting the Multirack waves with Midas Venice F32 desk to using wawes in Live Concert?

     

    Thanks everybody for the help

    0 94
  • KirillPavlov
    Newcomer - Level 2
    2020-09-23

    Dear Tribers!

    As it's indicated in manual for X2222USB, this mixer has rack-mounts included. But my client couldn't find these mounts inside the box. So the question is: are these mounts still included or there is some change in complete set?

    read more...
    0 57
    • KirillPavlov
      Dale_M Kirill I would advise you raise a support ticket and one of the team can organise sending these to them.
      • September 23, 2020
      • X2222USB
        KirillPavlov Thanks, dear Dale! It means mounts should be included, right? And it's unfortunately really difficult to send something to Russia.((( I will give them to customer from another box then.
        • 1
        • ·
        • September 23, 2020
  • zaian99
    Newcomer - Level 1
    2020-09-17

    Bagaimana cara setting untuk vocal diluar(dilapangan)

    0 232
    • zaian99
      DavidKnighton Pengaturan mixer untuk vokal sama untuk semua jenis mikrofon atau lokasi. Gunakan EQ untuk memfilter kebisingan sekitar yang tidak diinginkan.
      • September 17, 2020
  • zaian99
    Newcomer - Level 1
    2020-09-17

    Cara Setting vocal untuk lapangan 

    0 45
    • zaian99
      Nigel67 Dapatkah Anda memberikan beberapa informasi lebih lanjut tentang apa yang Anda coba lakukan dan saya akan mencoba membantu Anda lebih jauh. Maaf jika ini tidak terbaca dengan benar tetapi itu adalah google translate
      • September 17, 2020
  • dmottaz
    Newcomer - Level 1
    2020-09-10

    I have a Macbook Pro (Catalina) with all Thunderbolt ports.  I have Nonda Thunderbolt 3 to USB Adapters that I use for other devices - Is the X1222USB compatible with my laptop?  I'll use it mainly for recording.

    0 47
    • dmottaz
      DavidKnighton Hello dmottaz,
      In theory, your MacBook Pro should be able to accept USB audio via Thunderbolt 3 just fine. There are some new 'quirks' with Catalina software that might trip you up, but nothing a good google search will uncover. Also check out knowledge base for answers. I did an article about how Catalina software now requires security access to use the microphone for certain apps. I know it says microphone, but it actually means input device. Here's the knowledge base link.

      https://musictribecommunity.powerappsportals.com/en-US/knowledgebase/
      • September 10, 2020
  • arghkid
    Newcomer - Level 1
    2020-09-10

    Hello,

    I have a BEHRINGER X1832USB and trying to use on Logic Pro X on my Mac but it won't recognise any input sounds - I get music playing out of it but not as an input device. There is no where to upload a driver from the Behringer site for Macs and I'm stuck as to what to do next - I've tried the aggregared device method but it won't work?

    Any help be very much appreciated. Thanks.

    read more...
    0 144
    • arghkid
      JoeRivers96 Hi, you will not require any drivers for Mac OS as this unit utilises Apple Core Audio drivers. Please be aware that this unit will only submit a stereo mix through the USB port, which is the same mix as your main mix. You will not be able to multi-track record from this desk.

      The desk will be recognised as USB AUDIO CODEC. Set this as your input and output device in both your Mac settings and your Logic Preferences.
      • September 10, 2020
    • arghkid
      DavidKnighton Hello arghkid,
      Most of our small-medium format USB mixers will only send audio 1 way at a time. This means you have to choose whether to use the device as input vs output. Check this video link below and see if your answer lies there.

      https://www.youtube.com/watch?v=1Bp9luuOQZY
      • September 10, 2020
      • BEHRINGER X1832USB - CAN'T USE ON MAC FOR INPUTTING SOUNDS
        arghkid Thanks for getting back to me - would I be able to do this if I connect the Powerplay HA8000 to the X1832USB? And if so do you have any directions how I would set this up?
        • September 11, 2020
    • arghkid
      DavidKnighton Also, depending on your Mac OS, you might need to change security settings to allow use of the 'microphone' for certain apps. Double check this in security preferences. Known change for Catalina.
      • September 10, 2020
  • fbiederer
    Newcomer - Level 1
    2020-09-04

    Singer Songwriter set up.  Running JBL powered subs and mains, and using the mixer amp to run my monitors... Completely comfortable with the set up in that format, have ran sound for at least 75 shows that way.  Now we have a venue that hands me a 3 pin male XLR and says they want me to feed our sound to the house system which will catch the distant corners of the venue and outdoor patio.   Where would I coonect out of the board to get the mix out of the mixer

    read more...
    0 69
    • fbiederer
      Nigel67 Its a bit worrying if they are giving you a male XLR to connect to an output from your desk, surely it should be female. I would check where it is going before plugging it in and blowing up your desk. Also, if you are running a stereo mix on the main PA and you are giving them a mono feed for speakers around the venue, isn't this going to cause some strange effects for the people listening. Re the output you are going to give them, what 1/4" jacks do you still have free on your desk, and do you have a converter. Think I might just turn round and say sorry, don't have one, unless its feeding speakers in the lobby, etc
      • September 9, 2020
  • GrahamJeavons
    Newcomer - Level 1
    2020-08-30

    Hi 

    I have the above mentioned mixer which I purchased in December 1st 2018 my problem is that the fx unit on the mixer has stopped working switch on lights flash then go off and intermittently flash on & off but it doesn't work how do i go about getting it repaired or replaced as I assume it is still under warranty 

    Thanks 

    Graham 

     

     

    read more...
    0 64
    • GrahamJeavons
      RexBeckett Hi Graham, you need to open a Care ticket. At the top of this page, click Support -> Create a Care Ticket and select Type: Service Request. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • August 30, 2020
  • Laumee
    Newcomer - Level 1
    2020-08-24

    Hi guys, finally got my hands on legendary venice f24 and I love it! Amazing piece of gear. One thing that bugged me out was kinda overlooked option to record postfader via firewire to the computer using the outboard gear. I was wondering if there are any services that could help to sort it out? I found that it can be modified, but as I have 2 left hands dont want to risk it... Or maybe some specific routing options? Any help highly appreciated. Thank you

    read more...
    0 121
    • Laumee
      Dale_M Hi the Venice F has the modification option of the Direct Output of the Venice F Mono Input Channels from Post EQ Pre Fader to Post Fade, this should be carried out by an authorised Midas partner.
      • August 25, 2020
  • yikes514
    Newcomer - Level 1
    2020-08-22

    I have no idea why or How I got to MusicTribe

    I am looking for a part for my mixer, this is weird.

    NEways,

    On the EQ there is missing those plastic pieces on the EQ

    have a look at the photo

     

    0 65
    • yikes514
      Paul_Vannatto Music-Tribe is the parent company of Behringer, Midas, Turbosound, etc. You could submit a parts request ticket (click on Support above) and see if they would have any parts for that model. But that is quite an old (legacy) model that hasn't been in production for some time. Another alternative is to get someone to measure an existing EQ fader cover and 3D print some for you.
      • August 22, 2020
    • yikes514
      Dale_M Hi Yikes154, it is not impossible we still have parts for this unit as they have been used on later models. I would suggest following Paul's advise but send this image in with your email to speed up the part location, I hope this helps.
      • August 24, 2020
Go to page