306,020 members
190,366 posts
  • New
    Newcomer - Level 1

    ON My XR18 I have been using My old IPad 2 It has always worked great. But lately i have been thinking about using my Laptop with windows 10 with the xr18 app i downloaded on it on stage hardwired with a cable to my router. Will there be any conflicts with both running at the same time? I'm scared i might loose saved shows or something.

    0 24
    • soundtechmike
      Paul_Vannatto No there will not be any conflicts. But anything stored on the iPad is on the iPad only. What you need to do is to load each show (from the iPad) onto the XR18, then save as snapshots. Then using the X-Air Edit on the laptop, save those snapshots to files.
      • December 17, 2021
  • New
    Newcomer - Level 1

    Looking for X32-Q application for iPhone, I just see in Apple Store that is not available for 9 years ago since iOS 11, while we can install in Android devices without any problem in the last versions of Android...

    Is there any alternative for this application? We want it for iPhone devices.
    As the application is not updated for 9 years, Can you confirm that will never be updated?

    0 35
    • knil45
      Paul_Vannatto An excellent alternative is Mixing Station, a 3rd party app that is constantly updated by the developer.
      • November 26, 2021
    • knil45
      DavidThomson1 It was replaced by MX-Q a long time ago. MX-Q is far superior and available from the app store
      • December 2, 2021
  • New
    Triber Moderator

    Phase 4 WING CoPilot offers valuable control in different types of live or studio work, when the audio engineer is remote from the console or when tasks are split with techs on stage. It offers specific user interface modes for Performance Setup and patching, Personal Monitoring, Metering overviews as well as full SD Recorder control. The Front of House mode provides full remote access to channel processing and mixing, and it now features full graphics UI for all plugin and insert effects. 

    Note that CoPilot 1.10 is designed for WING console firmware 1.12 or higher. Please visit to download and install the latest firmware and enjoy the full potential of your WING. 

    This new WING CoPilot version 1.10 offers: 

    New Features

    • add FW version detection to support different snapshot data models, required for WING FW 1.12 or higher 
    • WING LIVE SD Recorder > improved remote control for Session and Marker list 
    • Front of House >all channel plugin effects support graphic frontplate UI editing in mini-preview and in fullscreen views 
    • Front of House > all 16 FX processors can be edited directly from the channel/bus insert using the mini-preview or the full-screen view 

    Phase 1. Performance Setup: 

    This section is specially tailored to the activities during setup and line-check. Prepare all Sources and Outputs while patching signals to I/O boxes on stage. Sources can be named, tagged, given a color or an icon. Sources also own the head-amp properties such as gain or phantom power. 

    Phase 2. Metering: 

    Additional metering can be displayed on your iPad next to your console touchscreen. It includes levels of all Sources, Channels and Outputs and an RTA that can follow the selected channel or be assigned to a fixed signal path. 

    Phase 3. Monitor Mixing: 

    The Monitor Mixing UI provides the essential parameters of personalized monitoring applications. In addition to individual channel sends, this section also provides an MCA view, where several channel sends can be adjusted by a single Mix Control Association. It also offers a lock function to reduce the risk of accidentally selecting the wrong bus. Up to 4 MCAs can be given a descriptive name for the associated group of channels, and color can be selected for additional clarity. Once the channel assignments are made, the MCA sliders can be used to increase or decrease the level of all associated channels at once. 

    Phase 4. Front of House: 

    The FOH section is designed for mixing from within the audience, essential when placing the console in a less than optimal position. Aside from a good overview of all fader layers, this section also provides access to the processing of channels, buses, mains and matrices. The new SD Recorder page allows full remote control over Recording and Playback functions. 

    Phase 5. Snapshots, Scenes, and Show Management 

    Key Features

    • Patch and Customize all Sources, Channels, and Outputs 
    • Configure all head-amp properties 
    • Patch Sources to Channels and Outputs 
    • Set up and control the Talkback 
    • Metering for single Sources, Channels, and Outputs 
    • Control Monitor-Mixes for IEMs and wedges 
    • Full FOH (front of house) mixing control 
    • Graphics UI for all effects with mini-preview and fullscreen views 
    • Full remote control of WING LIVE SD Recorder 


    * Requires a wireless router connected to the WING Personal Mixing Console 

    * WING CoPilot 1.10 requires WING console firmware V1.12 or higher

    1 526
  • New
    Newcomer - Level 1

    Is there some limitation on scanning for a console on the complete network scope with the IOS app v.1.2.b12? My network is a scope. Which means I have addresses available. If my iPhone has an IP of 10.10.10.X it scans and finds the console which is If my iPhone happens to have an IP address of 10.10.11.x it will not find the console. I can manually enter the IP of the console and it works fine.

    0 77
    • drumbella
      PedroRodrigues Hi drumbella,please consider that WING-Q can only scan class c addresses, otherwise the console scan would take forever. So if you have an “exotic” address, you need to do a manual connect. The "exotic" address is stored though, so that on the next scan it should work.
      • September 28, 2021
  • New
    Contributor - Level 2

    Like many I use the X Air busses to send monitor mixes to band members. I like effects on my bus to make the overall listening experience better. Problem is I can't always get effects to come across on my bus. I have a "Practice" scene that I use for rehearsal in my studio which DOES have effects coming to my bus. I often use this scene as a template for live shows. When it comes to the show I have NO effects in my bus. I often use other engineers to run my rig during live shows, so I thought maybe they are changing something. But I've looked at every possible setting between the two scenes and I find no differences. What can I be missing?


    0 39
    • WayneWickman
      DavidKnighton Hello Wayne,
      Like any other input, you'll need to SEND the effects return channels to any particular bus. Check that the SEND from the effects return to the mix busses is not POST FADER, as this will affect the send level. Make sure it's set to PRE FADER. The default setting is in fact POST FADER for the effects return channels, so be sure to change that over on the SENDS tab with the effects channel selected. See screenshot. What I would suspect is that the guest engineer is turning the effect return channel down in the main mix, and it is in turn affecting the send level to the monitors.
      • August 25, 2021
    • WayneWickman
      • August 25, 2021
  • New
    Newcomer - Level 1


    For a gig on saturday I would like to connect my MAC with a X32. The connection fails because my MAC says that the firmware of the X32 is not updated. I thought that X32-edit would be compatible with 'old' X32 firmwares. Do you know a solution apart of updating the firmware of the mixer?


    Regards, David

    0 45
    • davidreetz
      Paul_Vannatto I would suggest you update the X32 to the latest firmware and use the latest X32-Edit. Each version of X32-Edit has the specific newer features of each of the specific firmware.
      • August 17, 2021
  • New
    Newcomer - Level 1

    Please somebody explain to me why there is no offline edit/demo mode on the Wing Co-pilot app. So many times I am away from my mixer but want to mess around with the app and some different functions. Please update the co-pilot app!

    1 455
    • Gabejcole
      Nigel67 Hi Gabejcole. I will pass this request on to the software team. Many thanks.
      • July 5, 2021
    • Gabejcole

      Hi , we was expecting that the offline copilot app for wing to be released soon , also how about the PC based , the M32 and X32 have the edit app , will you release for that also ? i dont know the others but for me i am using 2* 27 inch touch screen that is conected to PC ,which helps alot . Thanks Regards

      • Jul 8
  • New
    Newcomer - Level 1

    Is the X air 18 compatible with a galaxy tab a7?

    0 118
    • tedf0rd73
      Paul_Vannatto It should work fine. I've been using a Galaxy Tab A 8" tablet with the X-Air and X32 consoles for over 5 years now without any issue.
      • May 26, 2021
    • tedf0rd73
      tedf0rd73 Awesome!! Thanks, Paul
      • May 26, 2021
    • tedf0rd73
      tedf0rd73 How do I download the app to control my XAir 18?
      • July 7, 2021
    • tedf0rd73
      Paul_Vannatto Go to the Play Store and search for X-Air App. The best app is Mixing Station Pro.
      • July 7, 2021
  • New
    Volunteer Moderator

    Hi everyone,

    I have just released an update for the Live Toolbox and Scene Parser family of apps, with some bug fixes and enhancements.

    X32 Live Toolbox v1.33

    X-Air Live Toolbox v1.33

    MX Terminal v1.08

    LT_Command v1.08


    X32 Scene Parser v1.15

    X-Air Scene Parser v1.02


    2 70
    • Paul_Vannatto
      LarryJost I have been struggling with LiveToolbox...with the English Commands, I can get "set channel x send x on" to work, but I cannot get any sends to turn OFF. Example:set channel 1 send 1 off
      set channel 1-5 send 2-4 on
      set channel 6-16 send 3 on
      set channel 17-27 send 4 on Separately, the English commands for DCA do not really work because they are a bitmap. For DCA I just use ordinary OSC commands instead, but it would be great to be able to use the English Command ranges for SENDS since there are so many of them.
      • Aug 8
    • Paul_Vannatto
      Paul_Vannatto Hi Larry, yes the ranges for sends do not work. I had a look at the code awhile ago and realized it would take some effort to figure out how to have ranges on both the channels and sends. Some day when I have some free time, I'll see what I can do.

      Regarding the off, last time I checked it was working, but will check again when I have the X32 Rack back in the house. Currently I'm having to setup the Wing for a 3 day event (with 3 bands and a town wide church service).

      Last time I checked, the DCAs worked fine. I know they are bitmap values. But Live Toolbox queries the current state and adjusts accordingly.
      • Aug 9
  • New
    Contributor - Level 2

    I'm a big fan of the Wing-Q app, I like that it is super obvious and easy to use. My only issue, is I am about to try and explain to some older folk how to use the app, and on a normal phone, the channel names are tiny! I'm not sure anyone will be able to read it... 

    What I was wondering, is whether it would be possible to have the channel name text size, and fader lengths increased, as far as they can reasonably go (possibly as an optional thing) to make it easier to read which channel is which, and to accurately adjust the faders. I realise that partly it is a tradeoff for having 12 channels per layer, but I took a screen grab on my phone, and highlighted some ideas where some space could potentially be saved to maximise the available area for the channel names. Any increases in text size would be much appreciated! 



    0 114
    • StephenEvans
      Dale_M Thanks for your comment I will pass your remarks over to the design team for consideration.
      • May 1, 2021
    • StephenEvans

      Very good! It's great to know this information, let's try and play [wordle]( for more interesting knowledge.

      • Oct 20
Go to page