306,003 members
190,348 posts
  • New
    Newcomer - Level 1

    I feel so silly, but I can not for the life of me find the software needed for the podcastudio2 ive been looking for hours and the quick start guide says to download software before connecting it to my mac. PLEASE HELP

    0 108
    • tonemotivates
      john0121 Hi Tonya, sorry it's missing from the webpage for podcastudio 2. You can find the same software bundle for download on this page though:

      Just click software on the right and there is a link for "all software for mac". Don't forget to register the product too (via support button) and you'll get a redemption code for Tracktion DAW.
      • December 7, 2020
  • New
    Newcomer - Level 1

    Looking to purchase an iPad Air to control it.

    Will the first Gen iPad air with the 12.4.9 firmware work?

    Should I purchase this iPad?


    0 82
    • BroJamesReece
      DaveMorrison 12.4.9 will work with both Mixing Station Pro and X32-Mix. X32-Mix hasn't been updated for three years and a lot of features don't work—notably routing. Mixing works fine though. Mixing Station is updated regularly and is highly recommended.
      • November 14, 2020
  • jonathaneliu45
    Newcomer - Level 1

    Can someone help me with this question?

    0 36
    • jonathaneliu45
      Paul_Vannatto The answer is 16, according to the "BE-P0BV2-WING-OSC_Documentation.pdf" (page 10) that is included with the latest Wing firmware update.
      • October 4, 2020
  • cleansugar
    Newcomer - Level 1

    Would you please send me a Behringer X32-Mix 2.3.2 ~ 2.0 for ios 5.1.1(iPad 1) ipa file?


    I can not find anything on internet.


    Thank you very much.


    [email protected]

    0 87
    • cleansugar
      john0121 Sorry we can only provide through the app store and can only list the latest version. We aren't able to provide an older version for iOS5.
      • September 23, 2020
  • srasi009
    Newcomer - Level 1

    What type of router should I get for my X32 console? There are so many and I am having trouble picking the correct MB per second

    0 176
    • srasi009
      RexBeckett It does not need to be super fast. 1200 Mbps would be enough. It should be a dual-band router and you should use the 5GHz band because it is more resistant to interference from phones and other Wifi devices. Look for one that supports 802.11ac Wifi and has multiple external antennae. It is also an advantage to have at least two LAN ports so you can connect a wired laptop if/when necessary.
      • July 21, 2020
    • srasi009
      DavidKnighton Hello srasi009. Any simple router will do. The feature that I would consider before purchasing is WiFi RANGE. The lower end models don't have very good range, which means that the signal will degrade faster when there's a bunch of phones/tablets in the room. Users will often have a good soundcheck, but once the room is filled with guests, the WiFi signal starts to become unreliable. Get a router that has decent range for your expected environment and keep it as close as possible to the area in which it will be used most heavily. Notable brands, Linksys, Netgear, Cisco, TP Link. Avoid using Apple products as they are finicky with these consoles.
      • July 23, 2020
    • srasi009
      JasonAdamses All you need is a good Router and it doesn't need to be connected to the internet. I use a AC1250. Plug the Router into the Ethernet port on the back of the Rack.. In the Setup Tab in the X32Rack setup the Connection. Connect your laptop/pc/or tablet to the Router. Connect and go. I use low cost Android Tablets with Mixing Station Pro with very good results. There is Mixing Station and Mixing Station Pro that is available. (Mixing Station Pro is well worth the few dollars it cost!) Behringer also has X32 Edit software as well. For me I find best antivirus apps for iphones here: and it best to have the Router fully booted up and on before turning on the mixer. Again Mixing Station Pro is a great app to start with. ;-)
      Just know you may struggle at first to get it all going. May require some updates to the desk and software to get everything on the same page if you will. Here is just one example from YouTube. I'd also recommend spending some time with Drew Brashers videos as well.
      • Apr 9
Go to page