we have recently purchased a xr18, we have guitars,vocals and drums in through the preferred channel strips.

when we solo the bass channel to Eq it this works great, when we solo each individual drum to do the same the solo button acts like a mute.

does anyone know where we are going wrong.

I have an perfectly working one of XR18 mixer and after switching power ON - the "LD2" LED flashing some seconds and "LD1" LED lights up. On not working XR18 mixer the "LD2" LED is flashing but "LD1" LED doesn't power up. And not working mixer doesn't shows up on my computer connected via Wi-Fi or Ethernet or USB. I think it is a problem with Firmware but I can't update it or doing something else because mixer can't be connected to the computer. What i have to do in this case to fix this problem?

Hello,

1. Is it better to control my XR18 during a live gig through a wifi-connected (via external router) Android tablet or through a wifi connected (also via external router) PC (laptop)? 

2. Relatedly, is there some sort of priority one gets over the other? For example, if one person is making changes through the PC does the PC somehow block any changes another person puts in through their tablet or phone (changes to in ear monitor AUX outs, for example)?

3. Finally, can someone confirm that snapshots are saved in the mixer whereas scenes are saved in the controlling device? If so, if I save a scene in my laptop and call it up at the start of the gig, can I then move my controlling to the tablet and use the tablet during the gig? Then at the end of the gig would I have to start the laptop back up to save the gig's "scene"?

Thanks and sorry for the complicated questions. I am new and we gig tomorrow.

Brian

Hello,

i really use many years Behringer Products, but in my and from sond engineers opinion e are missing new innovation. example Touch screen or optical connection between mixing and S16(Example). 

So how your next innovation?? 

Best Recards 

Sven Burgis

Hello.
I recently bought two SD8 and a SD16 to use as XLR boxes in my studio and be able to conect the mics in several places of the recording room via one CAT5 cable to the control room. The thing is I can easily use one of them but can't get to record using the three on cascade.
I have the AES50 A input conected to the A input on a SD8. The B of that SD8 conected to the A of the SD16 and the B of the SD16 to the A of a SD8. I entered the routing page and it detects the three boxes as in A mode (or channel or whatever). I then set the inputs as follows:
1-8 to AES50 A9-16 (the SD16)

9-16 to AES50 A-17-24 (the SD16)

17-24 to AES50 A1-8 (the first SD8)

25-32 toAES50 25-32 /the second SD8)

It's so I have the first 16 inputs in the SD16 where my drums are.

In the X32 you can see the input signals correcly but when going to record in my MAC through the usb connection it all seems messed up and it only recognices some inputs...

Noting that I have 32 inputs enabled and have recorded them before using the XLR inputs of the X32. I use Ableton Live 10 on a MAC.

As always, thanks a lot for your time and support.

The device will not power up.  I am using a Furman power conditioner

it is in a controlled studio.  (no moisture, sunlight, overheating).  

Powerlight comes on, then dims and flickers

The device doesn't work will not connect to wifi, nor register on the usb.

Hello,

I've found recently that the Behringer S16 can be used as standalone stagebox. But as the S16 have only 8 outputs, the 9-16 output coming from another S16 in the stage is routed to ADAT in the FOX S16, so I have to add a ADAT-analog converter in my setup to get these output.

I'm wondering if SD8 can be used as same purpose, because SD8 has 8 in / 8 out, so with the same setup, I can hook up 2x SD8 on the stage and 2x SD8 in FOH.

Or is there any another easy setup to make use of digital stagebox with analog mixers?

Hi

I have 2 lead singers and I would like to try the dual mode Fairchild compressor as an insert

The manual is a bit thin on this, but as I see it I just have to load the compressor in the rack, click the insert button, select channels 1 and 2 from the dropdown list, then click the purple button for each channel. Can anyone confirm please?

Thanks

Phil