Statistics

294,759 members
177,888 posts
  • keeganmccarthy
    Newcomer - Level 1
    2020-07-09
    Hello all, I just got a DP48 which I am super excited to use! I did have a question about the compression settings. From what I can tell the only control over the amount of compression is a percentage. Is there a way to see and change the more in depth settings of the compressor, such as knee and ratio?
    read more...
    0 54
    • keeganmccarthy
      Paul_Vannatto The percentage of compression is the only control available. All other settings are fixed internally.
      • July 9, 2020
  • YTS82Z
    Newcomer - Level 1
    2020-07-07
    Dear friends of the tribes I'm using the DP48 as a headphone monitor mixer in the studio with the M32R and a DAW running on a stationary computer, no big issues, BUT I also do gigging and tracking in rehearsal rooms and live, and for that purpose, I made a nice portable rig, with the same studio quality, by using the DP48 as a mini mixer with a DL16 , a KT DN9630 and a macbook. The latter DN9630 and macbook when tracking. For live performances, I intended to use the SD card player of the DP48, which also is the mixer and I/O for FOH and monitor through the DL16. Now for every firmware update, Midas has managed to remove functionality, add new features and introduce new errors. All the struggles I've had with AES50 on this unit, is a separate story (upstream/downstream bugs, distortion, mandatory 8 ch AES50 out instead of the 4ch, now using up all the DL16's outputs etc.), but right now, with firmware 1.4 it seems as the AES50 A & B finally works as described, but now the SD card playback doesn't give any sound. It is recording and it's also playing back, but no sound. Output source A and B are selected and the volumes are up :-) Anybody tried this? I'm not able to play live with the SD card now, do I have to wait for firmware 1.5? It seems as Midas/Behringer don't do proper functional tests before firmware releases - do You remember the M32 fader speed thing :-) Any help most appreciated Best regards Niels
    read more...
    0 144
    • YTS82Z
      DavidKnighton Hello YTS82Z. This has been reported and confirmed as an issue with 1.4 firmware. A fix is already on the way. I have reports that the issue is not present on earlier firmware, so you may be able to downgrade the firmware in the meantime while waiting for the new update.
      • July 9, 2020
      • DP48 firmware 1.4 No SD card playback?
        YTS82Z Hi David. That's good news - Thank You.. As Nigel subsequently points out, it seems the problem will be solved within short, so I will wait for the official update. By the way, earlier fw revisions, e.g. version 1.3 also had its flaws, namely some issues in the AES50 streams when daisy chaining, which I do, so that ain't the way for me :-)
        Best regards
        Niels
        • July 10, 2020
    • YTS82Z
      Nigel67 Hi YTS82Z, I have a Beta version with a fix in that has been tested and confirmed fixed. if you would like to try this I would be more than willing to e-mail it over if you are interested. It is a Beta version though but we would be interested to have someone external test it and see that all the bugs are fixed. Send me your e-mail address if you are interested. I am told that this Beta candidate should be ready for release Monday or Tuesday next week, so if you could hang on til then.
      • July 9, 2020
      • DP48 firmware 1.4 No SD card playback?
        YTS82Z Hi Nigel. Thank You for fast reponse, it's most appreciated. Since I'm up for vacation next week, I will wait for the official update to be released. I will give You a feedback, when I've tried it out.
        Best regards
        Niels
        • 1
        • ·
        • July 10, 2020
    • YTS82Z
      Indiana Just saw that version 1.5 is up on the website and should fix this issue.
      • July 17, 2020
      • DP48 firmware 1.4 No SD card playback?
        YTS82Z Hi Josh
        • July 18, 2020
      • DP48 firmware 1.4 No SD card playback?
        YTS82Z Thank You I will try it out this weekend. Best regards Niels
        • 1
        • ·
        • July 18, 2020
    • YTS82Z
      YTS82Z Hi all
      FW 1.5 is released, and it corrects the SD card playback issue. When I got the time, I'll check, that other functions remain okay as well. Thank You Midas/Nigel for fast action on this, it's most appreciated.
      Best regards
      Niels
      • July 22, 2020
  • Mrjohnallen
    Newcomer - Level 2
    2020-07-07
    I own the Behringer K10S Audiophile Studio Subwoofer, and the on/off switch is located at the back and bottom rear of the unit. "Is it ok to just leave it on Vs. having to always have to bend over and manually pull the unit from under my desk to use it"?
    read more...
    0 61
  • Mrjohnallen
    Newcomer - Level 2
    2020-07-07
    I own the Behringer K10S Audiophile Studio Subwoofer, and the on/off switch is located at the back and bottom rear of the unit. "Is it ok to just leave it on Vs. having tp always have to bend over and manually pull the unit from under my desk to use it"?
    read more...
    0 28
  • kennylaw
    Newcomer - Level 2
    2020-06-27
    Trying to set up monitor for vocalist in vocal booth. I need some help on this, I am trying to set up a send to headphones for vocalist.... is there a video or something that can help me do this...
    0 95
    • kennylaw
      kennylaw Do i need a headphone amp etc... just learning on the whole thing called the M32...
      • June 27, 2020
    • kennylaw
      RexBeckett Select the target Mixbus, press the Sends on Fader button and raise the faders for the channels you want included in the monitor mix. Route the Mixbus to one of the console outputs through the Out 1-16 and XLR pages.

      The console outputs are not suitable for driving headphones directly. A small headphone amp, like the Powerplay P2, would fix that. See this thread for cabling details:https://community.musictribe.com/discussions/77059/237996/using-the-powerplay-p2-for-wired-iem
      • June 27, 2020
  • jojojoshua
    Contributor - Level 1
    2020-06-22
    Recently installed 6 DP48 with a Wing console for our church. Question is concerning storage of presets on the DP48. When you store a preset, does it store both the A and B mixes on the one storage slot? Is there a way to store A and B mixes independently? we are using the A mix for our stationary musicians and the B mix fed back to the Wing and routed out to wireless IEMs for the vocalists. The musicians are usually the same but the vocalists change from week to week and it would be great if they could save their mixes separately from the musicians. In regards to the 8 channels returned on the AES50. Does anyone know if anything is on 7 and 8? Channels 1 and 2 are the A mix. 3 and 4 are the B mix. 5 and 6 appear to be the ambient mics. Thanks for the help.
    read more...
    0 90
    • jojojoshua
      Paul_Vannatto Hi Eric, Yes both A and B mix are stored in the presets. Currently there is no way to separate the mixes. I had started developing a DP48 editor app last summer, but ran into a snag with the required checksum that has to be generated and added to the end of the file. When I get a chance, I'll try again to complete the app.

      Channels 7/8 are the Line In L/R
      • June 22, 2020
  • Philmoore174
    Newcomer - Level 1
    2020-06-16
    Can a P1 IEM amp run off a 12V plugpack?
    0 110
    • Philmoore174
      RexBeckett The P1 can run from a 9V 100mA centre-negative power supply. I would not connect a 12V supply.
      • June 16, 2020
    • Philmoore174
      paulop Probably yes, but don't take my word for granted. Most of these circuits are based on op-amps and regulators that usually are rated up to 30 or so volts, but again, it's your risk. make sure you use a center negative plug, that's important.
      • July 2, 2020
  • Indiana
    Newcomer - Level 2
    2020-06-08

    Ok just received 4 of the DP48's and updated the firmware this evening. So when in dual mixer mode, when setting the group channel assignments, and channel levels, how do you set them up for each mix A and B? Or are these settings global for both mix A and B? 

    read more...
    0 123
    • Indiana
      GaryHiggins

      @__JAG__ 


      The sources are the same for both, the mixes of the sources is what can be made different.

      • June 8, 2020
    • Indiana
      Indiana

      So the group sources and levels are the same for each, correct? Then you can individually control levels of each group for Mix A and B? That is what I'm seeing. 

      • June 8, 2020
      • DP48 Edit and Assign
        LTisdale Correct. You can also control the pans of each group independently in each mix as well as the levels.
        • June 12, 2020
    • Indiana
      Indiana Just found out yesterday that there is a bug in the firmware. The outputs coming back from the DP48's are not working. It works on the first unit, but the subsequent units put out static. I went down to version 1.2 firmware and the issue is no longer there. So it is an issue with the 1.3 firmware. And I do have a ticket in on the issue. I have seen someone else who noticed the same issue as well.
      • June 12, 2020
  • EllisLampman
    Contributor - Level 3
    2020-05-29

    Does running IEM (earbuds) like Westones out of the HA8000 work well? Obviously a 1/4" to 3.5mm adapter is needed, but I'm more concerned with the impedence working with earbuds as opposed to headphones.

    The 1/4" phone jack out of my Mimic Pro drum module sounds terrible with my IEMs, so I think thats an impedance issue with it being designed for over-the-ear headphones.

    Anybody know about this?

    Thanks

    read more...
    0 80
    • EllisLampman
      RexBeckett

      @EllisLampman 


      Westone IEMs usually have an impedance of 19 Ohms. The HA8000 V2 can drive headphones with impedance as low as 8 Ohms so should be fine. The combination of Westone's high sensitivity with the high output level of the HA8000 could make them very loud. Be careful with the level controls!

      • May 29, 2020
  • da_bassman
    Contributor - Level 1
    2020-05-28

    Our church just purchased 4 Behringer P-16M's. We are using them in conjuction with a Behringer XR18 digital mixer. The ultranet cable runs from one end of our stage to my P16, which is about 50 feet cable lenght. I'm the bass player. From mine it then is run from my Thru to the IN next in line and on until it reaches the 4th one. Everything out of the mixer to the P16s is fine except for the bass which is intermittent in the P16's only. It's rock solid in the house mix. I can play maybe a measure or two and then the bass just kind of fades out. A few measures later it comes back and then goes away again. Since I'm at the top of line then I know the drummer is experiencing the same intermittent signal so I'm going to assume the other two are also. I've tried moving the bass input to other channels on the mixer but the problem is still there.

    I am stumped so any help would be appreciated. Thanks in advance.

     

     

    read more...
    0 80
    • da_bassman
      Paul_Vannatto

      Hi Glen @da_bassman 


      Check the limiter level (top right knob) on your P16. It is probably turned down. One of the musicians at my church had the same thing happen to him and his limiter was turned down.


       

      • May 28, 2020
Go to page