Can someone please enlighten me on the new talkback functionality of the Hub4 in connection with the DB48? 
The "documentation" says that there should be a LED indication when "MIC-function" is used. So this leads to two questions: where should the light appear, and what does Mic-function use mean? When the MIC button of one of the connected DP48s is pressed and held, or only when it's pressed?

Although I am a technician, I'm not sure if I read the routing sheet well: Where does the talkback signal go? Only to other connected DP48s (as channel 48 overwriting the channel 16 of P16) or also to the desk?

Thanks in advance

Andy from Austria

Hello,

I've posted previously about having an issue with seeing the channel names broadcasted to the DP48 while using an SD8 with the Behringer X32 Compact. The community has helped with understanding the AES50 A & B streams. However, I still need help from the community to answer this question.

Should the DP48 see the broadcasted channel names when connected to an SD series digital snake or should I be using the S or DL series digital snakes?

What I've experienced is that the DP48 does not see the broadcasted channel name but does get the same channel setup and audio from the AES50 A side the snake box is setup on. When the DP48 is directly connected to a separate AES50 port on the mixer and NOT through the SD snake box, all the channel names are received including real-time name changes.  I've experienced this on the X32 Compact and WING mixers using the SD8 and SD16 stage boxes. 

Tribal help is greatly appreciated.

I have connected my new P16-M via the Ethernet-Cable to one of the four ULTRANTE-Ports on the SD16 Stagebox. The P16-M worked fine (PoE) an I was able to here "something". When I tried to change the routing in the X-32  int P16  (or now utlranet) Side  nothing happen/changed.    I resettet the P16-M , but same Problem.  The I wired it directly to the X-32 (I had to use the wallplug of the P16-M becuase there was no PoE on the UTLRANET-Port of the X-32) everything works well.   Has anybody the same Problem?  Did I something wrong in the routing of the SD-16 ?   

Thanks for any ideas. 

 

Uli

On my old Behringer P16Ms, I could assign signals from channels post EQ. With the DP48, when I'm assigning the channels using AES50, I am guessing I am tapping the raw signal from source probably after gain but pre effects. I figured I could still tap the 16 channels from Ultranet to get post-eq settings. And it looks like I can tap another 8 via the Aux Out assign (assuming I don't need the physical/digital outs).

Does that mean I'm limited to tapping 24 channels post EQ? Or am I missing some optionality for routing signals post effects.

Thanks!   

Hi,

I have a few MIDAS DP48s for the band members. Running them from X32/M32 mixers. Been able to import group names and manually program groups. But I have not been able to figure out how to use the Auto Assign by group or color features. Do you need a HUB4 to use this capability?

Also, I found an AES50 Group name assignment feature in the Library section of the X32-Edit software. I can input the information there but don't know how to push it out to the DP48. Does it also require a HUB4 to allow this feature to work?

Thanks!

Kevin

Dear friends of the tribes I'm using the DP48 as a headphone monitor mixer in the studio with the M32R and a DAW running on a stationary computer, no big issues, BUT I also do gigging and tracking in rehearsal rooms and live, and for that purpose, I made a nice portable rig, with the same studio quality, by using the DP48 as a mini mixer with a DL16 , a KT DN9630 and a macbook. The latter DN9630 and macbook when tracking. For live performances, I intended to use the SD card player of the DP48, which also is the mixer and I/O for FOH and monitor through the DL16. Now for every firmware update, Midas has managed to remove functionality, add new features and introduce new errors. All the struggles I've had with AES50 on this unit, is a separate story (upstream/downstream bugs, distortion, mandatory 8 ch AES50 out instead of the 4ch, now using up all the DL16's outputs etc.), but right now, with firmware 1.4 it seems as the AES50 A & B finally works as described, but now the SD card playback doesn't give any sound. It is recording and it's also playing back, but no sound. Output source A and B are selected and the volumes are up :-) Anybody tried this? I'm not able to play live with the SD card now, do I have to wait for firmware 1.5? It seems as Midas/Behringer don't do proper functional tests before firmware releases - do You remember the M32 fader speed thing :-) Any help most appreciated Best regards Niels

I own the Behringer K10S Audiophile Studio Subwoofer, and the on/off switch is located at the back and bottom rear of the unit. "Is it ok to just leave it on Vs. having to always have to bend over and manually pull the unit from under my desk to use it"?

Recently installed 6 DP48 with a Wing console for our church. Question is concerning storage of presets on the DP48. When you store a preset, does it store both the A and B mixes on the one storage slot? Is there a way to store A and B mixes independently? we are using the A mix for our stationary musicians and the B mix fed back to the Wing and routed out to wireless IEMs for the vocalists. The musicians are usually the same but the vocalists change from week to week and it would be great if they could save their mixes separately from the musicians. In regards to the 8 channels returned on the AES50. Does anyone know if anything is on 7 and 8? Channels 1 and 2 are the A mix. 3 and 4 are the B mix. 5 and 6 appear to be the ambient mics. Thanks for the help.