Statistics

260,531 members
139,127 posts
  • Maevis
    Newcomer - Level 1
    2020-09-28

    Hi,  has any one experiecned this?  Using my Crave in Ableton and when I connect it via usb and hit a key, either on the Crave itself or using my launchkey mini, I get a squealing feedback type sound almost immediatly after the note.  I have to then switch the Crave off and on again to get rid of this insane noise.   This doesnt happen when I go via the midi in, which is ovioulsy what I will do from now on.  So it's usable but confusing and annoying!  Any ideas?

     

    Thanks

    read more...
    0 436
    • Maevis
      DavidKnighton Hello Maeve Devine,
      Would you be able to capture this problem on video? I think this would be a great way pass on to our developers. Post a download link to your video in a reply post and we'll investigate. If it's something we need to work on, then it'll take some time before an update is released.
      • September 28, 2020
      • Behringer Crave squealing feedback  type sound when usb is connected.
        Maevis Hi David. Cheers for the reply. Yes I can do that. I'll get on it asap. Cheers. M
        • September 29, 2020
    • Maevis
      Maevis Ok here's a video. I've got it running through a Stienberg sound card and a mixer before the speakers in this, but I repeated the process right after with the Crave line Out going direct to a little practice amp / speaker and it was just the same. This is literally my first synth so its entirely possible that I'm making some rookie error (which I'll pleased about if that is the case) but I have no clue why this is happening. PS, I'm using this with Ableton (Live 10 trial version) and it seems to be working ok when I connect it with just a midi cable.... Any help/ advice would be greatly appreciated. I really love the sounds I've coaxed out of this thing so far and I'm looking forward to getting more familiar with it once this problem is resolved. Thanks M
      • September 29, 2020
    • Maevis
    • Maevis
      DavidKnighton Hello Maeve, Thanks for providing the link. I can clearly hear something is not right when the USB is plugged in.
      Does is matter whether or not the SynthTool is open/running on the computer?
      What happens if all apps are closed, does it respond the same way?
      If a firmware update is available for the Crave, I would recommend running it via SynthTool to see if changes anything. You can find the SynthTool version 2.4.1 under SOFTWARE on the Crave product page here. https://www.behringer.com/behringer/product?modelCode=P0DPX" target="_blank" title="https://www.behringer.com/behringer/product?modelCode=P0DPX" target="_blank" title="https://www.behringer.com/behringer/product?modelCode=P0DPX">https://www.behringer.com/behringer/product?modelCode=P0DPX">https://www.behringer.com/behringer/product?modelCode=P0DPX">https://www.behringer.com/behringer/product?modelCode=P0DPX
      Let me know if this changes anything. If not, I'll raise a software /bug report with the developers.
      • September 30, 2020
      • Behringer Crave squealing feedback  type sound when usb is connected.
        Maevis Hi David. I did as you suggested and it seems that the issue has been resolved. I'm wondering if maybe I was getting feedback from something I'd routed wrong in the rest of my signal chain. Who knows?! Any way, my Crave is behaving itself again. Thank you for your time. Best wishes.
        • October 1, 2020
  • raenur
    Newcomer - Level 1
    2020-09-14

    Self explanatory - I'm looking to get a new mac and need to know if the X-touch will work with Catalina - there is no clear statement about support, but the device works without me installing any drivers on High Sierra. If it's a class compliant MIDI device I'd find it odd if it didn't still work.

    Can any current users report if they have it running already?

    read more...
    0 110
    • raenur
      KyleJohnson Hello, Kyle with Music Tribe here. Yes, the X-TOUCH is compatible with Mac OS Catalina 10.15
      • September 14, 2020
    • raenur
      ChrisJanton Works fine here - I have been using X-Touch, XR18, X-Air Edit, and Logic Pro X quite nicely on Catalina. No drivers required
      • September 16, 2020
  • grolim
    Newcomer - Level 1
    2020-09-08

    Hello, 

     

    Does anyone know how to download the softwares that come with my Behringer UMX610 (NI Kore Player and Behringer EnergyXT 2.5)? I have already registered my product but I can't log on the behringer website with my Music Tribe account, it always tells me my User Id or password are incorrect.

     

    Thank you in advance.

    read more...
    0 85
    • grolim
      WilliamR Hello, Everything that comes with the UMX 610 is located under the software tab under this link.
      • September 8, 2020
    • grolim
      WilliamR https://www.behringer.com/behringer/product?modelCode=P0A1K
      • September 8, 2020
    • grolim
      grolim Hello, William. But what about the NI Kore Player and EnergyXT 2.5 Behringer compact edition? These are not provided on the link you told me. The software on this link are free and available to anyone. When I bought the UMX 610, the advertisement showed that these were included. Thanks.
      • September 8, 2020
  • dromano
    Newcomer - Level 1
    2020-08-07

    Any had this problem or know how to troubleshoot it?

    Thanks

    0 112
    • dromano
      KyleJohnson Hi Dromano, Kyle from Music Tribe here. A couple of things to check 1. Try a different USB Cable 2. Make sure you are connected directly over USB to your Mac, not using a USB Hub or Adapter 3. Try with and without the UMC404HD Power supply connected 4. If you have access, test the UMC404HD with a different computer to confirm the interface is functioning correctly
      • August 7, 2020
      • my mac's sound system can't see my Behringer UMC404HD inteface
        dromano Thanks, Kyle: I tried the UMC404HD with another Mac (2018, High Sierra), the same USB cable connected directly to the laptop, and with no power supply connected, and the interface was instead visible. The only difference in the configuration was the laptop, which is a 2012 Mac running El Capitan. What's strange is that the Behringer was visible until we changed the RAM from 4GB to 16GB, so I wonder whether more memory meant less power to the Behringer (which was never visible when the power supply was connected.)
        • August 7, 2020
  • Iguanodon
    Newcomer - Level 1
    2020-07-30

    Hi! Is there a way to use a BCR 2000 to control some features in Logic X?

    I mean, some cutoff knobs on certains plug ins, ADSR cursors, and common values, like volume, pan, on channel strip ? (I do not expect a complete control, for sure...)

    Regards

    Iguanodon

    read more...
    0 99
    • Iguanodon
      DaveMorrison Yes you can.
      • July 30, 2020
      • Bcr 2000 to control Logic X?
        Iguanodon Hi Dave, thanks for your answer. In fact, it's not possible to load the Bcf 2000 configuration in logic (and the Bcr2000 is missing). Do I have to use another preset? it's pretty tricky, do you have any further information ? Regards, iguanodon.
        • July 30, 2020
      • Bcr 2000 to control Logic X?
        DaveMorrison Were you looking for something like Mackie Control Emulation? I would think the "learn" MIDI assignment would be preferable for filters and volume changes. Maybe I'm misunderstanding your question.
        • July 30, 2020
      • Bcr 2000 to control Logic X?
        Iguanodon Hi Dave, again! Tx for your answers... I load the Mackie Control into the logic window. I have a "learn mode" on the Bcr2000, and also a "learn mode" in the "assignation" window in logic. What to do ? Do you manage this? the Logic's user guide for that is so enigmatic...I Note that only the Mackie Control communicate (sometimes...) with the Bcr2000. Tx for helping. Regards.
        • July 31, 2020
    • Iguanodon
      DaveMorrison If I had a BFC, I think I would use Logic's mapping functions. If you need more knobs, then I would also use the BFC's mapping to make different controller banks.
      • July 31, 2020
  • Caught exception: Specified column "user_id" is not in the row
  • rohb804
    Contributor - Level 1
    2020-07-22

     hi,

     

    In our band, other than bass, guitar, and accoustic drum, we also have an audio interface, 1 drumpad, and 1 midi KB, since the drumpad and midi kb need sound samples from computer, what's the proper connection order among them(XR18, audio interface, drumpad, and midi kb,they all have midi I/O and usb)?

     

    thank you

    read more...
    0 106
    • rohb804
      AlexLane You can use the XR18 as the audio interface with the USB connection, and set pass though for midi to the computer too. (see attached image)

      In doing this, you can remove the audio interface from the setup :)

      For the keyboard and drum pad, set drum pad to midi channel 10 and keyboard to another.

      Do the MIDI devices have Midi THRU?

      If so you can daisy chain both into the XR18 input, otherwise, grab a MIDI Thru box to chain them together.

      You will then be able to select the relevant midi channel on each track in your DAW on the PC.
      • July 22, 2020
  • TheFantasyClinic
    Newcomer - Level 1
    2020-07-16
    I was so excited to come home today to play with my new Model D and so far I have found getting around the company/product site extremely frustrating...I am not able to register my product, after filling out the information, it just keeps "thinking" and doesn't seem to actually be registering, it's in a constant state of processing. Not sure if the site is down but so far I'm finding it really difficult to simply get off the ground. There really should be a clear and concise "start-up" path when purchasing/setting up a new product. Even writing this ticket in the drop-down menu for category, I would have thought "Synthesizer" would have been one since Model D is one!! So don't even know what to choose there...
    read more...
    1 66
    • TheFantasyClinic
      Dale_M Hi there, we had some network issues over the mast couple of days, can you try again and let me know if it is still falling over?
      • July 16, 2020
    • TheFantasyClinic
      FlOyd same here but all worked ok today as i just wanted to register my new pro 1 and was confronted with a shed load of daft questions, and good point on model d as im still looking as tried midi equipment amongst others and found it under keys/synthesizers which is weird as it has no keys- keyboard?
      • October 21, 2020
  • tvpRich
    Newcomer - Level 1
    2020-07-12
    So I own a new'ish Behringer X-Touch Compact. I've had it for a couple of months now but have not used it with exception of trying it several times at the beginning. I tried it on my Intel NUC Hades Canyon, connecting it via an old USB2 cable. Then a new cable. Then a USB3-to-2 cable, all with the same results. At first, everything seems to work okay, but then within several minutes and/or restarting the computer, many of the programmed faders and buttons forget their programming. I'm using the latest version of vMix now on my brand new Intel Quartz Canyon PC (with more than enough power to handle the X-Touch Compact controller). I've even downloaded a template that an expert from one of the X-Touch forums had, which works perfectly at first, but then experiences the exact same flaws as with my other computer. I've tried different sized cables, different power conditioners, no power conditioner, different USB ports, different programming methods, all to the exact same disastrous fate. ----- This is what happens... 1. I program or import a template. 2. The faders follow the audio faders on vMix screen.] 3. Within Several minutes, when I try to fade up (lets say fader #1), the #2 fader will follow (mechanically) the #1 fader. 4. Then, one of the buttons (completely random) just above the faders (which are programmed to solo each input) will not be turned on. No matter what I do, that button won't turn on. 5. Then I try a computer restart to see if this might clear things up. Nope, just gets worse. I turn up a random fader lets say # 6 (using vMix on-screen) then the mechanical fader will shoot straight down back to zero (at the far bottom). 6. Then fader #1 starts to always creep 10db lower than I keep setting it (all on its own). ----- I'm not sure, with who the problem is with. vMix? or with Behringer?
    read more...
    0 108
  • blastedkane
    Newcomer - Level 1
    2020-07-03
    I am using the following setup x18 mixer with the X-Air app on the Ipad Ipad running Camelot Pro MODX8 Native INstruments A61 Set up 4 port hub plugged into the IPAD A61 and MODX8 plugged into the hub Midi CAble (5 pin) from MODX out to X18 Midi in. Microphone into X18 I have 2 main snapshots 1 - vocal mic is sent to main output 2 - vocal mic is removed from the main mix and re routed to the MODX AD input 1 via Bus 1 which then treats this as the source for a vocoder Camelot Pro is doing a really good job on controlling the programme changes to the modx and also acting as a bridge for the A61 to also control specific channels. Camelot pro also allows for midi programme changes, which I know the x18 can accept. The reason for the request is that i am I do not want the vocoder on all songs, however when not used as a vocoder I need the same mic to act as a standard vocal mic. I could potentially have 2 mics and remove the vocoder source from the mix however the Idea would be to have the single mic covering both jobs and when the song is chosen in camelot pro, the programme change would change to the relevant snapshot./ Can anyone help.
    read more...
    0 102
    • blastedkane
      RexBeckett Midi Program Change 1-64 on channel 1 will load X18 Snapshots 1-64. You need to enable DIN RX on Setup -> Audio/Midi.
      • July 3, 2020
Go to page