Statistics

260,195 members
138,697 posts
  • New
    MauriceBates
    Newcomer - Level 1
    2021-07-14

    hi all, I have an rh 750 and wonder when connected to an 8 ohm 4×10 does the power half to when connected through a 4 ohm 4×10 cab

    mo 

    0 44
    • MauriceBates
      DavidKnighton Hello MauriceBates,
      Typically, the output rating is given at 4 Ohms, so you should have full power when connected to a 4 Ohm load. The manual lists 750 Watts for the power module rating and 1,200 Watts peak output at minimum impedance (4 Ohms). Running an 8 Ohm load would reduce the output power by roughly half, and should allow the amp to run a bit cooler. Check out the POWER RATING document on the product webpage here https://www.tcelectronic.com/product.html?modelCode=P0CIV
      • Jul 14
  • New
    sammys
    Newcomer - Level 1
    2021-06-24

    At 4 ohms the BH800 has a power module rating of 800W, according to the manual. I believe this is continuous/RMS? 

    But what is the wattage at 8 ohms?

    Thank you very much.

    0 54
  • New
    parenthesis78
    Newcomer - Level 1
    2021-06-23

    When I go to the tc site and select spare parts it takes me to musictribe 

    can anyone direct me on how to order replacement knobs 

    0 142
  • New
    flobass
    Newcomer - Level 1
    2021-06-03

    Hello,

    I search the caracteristics to the bass cab k210 speaker. Could you give me theses informations? Sensitivity, yield etc...

    My bass cab is a K210 serial number:S181000133BRQ

    Regards

    Floran

     

    0 71
  • New
    EdPolo
    Newcomer - Level 1
    2021-05-28

    Hi,

    I have BG250-208 and Switch-3 pedal. However, I never know which TonePort is active. Is there a way to  know when each of these slots are active? I want to load two different effects but am always able to load one in slot 2. When I activate slot ! nothing is happeneing. Mute siwtch (#3) is working fine.

    Thanks,

    Ed

    read more...
    0 54
  • New
    tcelectronicisonlygoodforscrap
    Newcomer - Level 1
    2021-05-20

    I am trying to buy parts for RH450. I have joined your so called tribe, sent e-mail, created care ticket over a week ago and i hear nothing. I am not impressed. I am a pro repair engineer working with pro musicians who don't have time for manufactures social nonscence. They just want their equipment fixed.

    read more...
    2 73
    • tcelectronicisonlygoodforscrap
      PedroRodrigues Hi tcelectronicisonlygoodforscrap to be able to assist you on this matter can you lease provide the case number assigned to this request. Thank you
      • May 21
    • tcelectronicisonlygoodforscrap
      tcelectronicisonlygoodforscrap Case number is CAS-455215-C5V5N8.
      • May 21
  • New
    Rapisme
    Newcomer - Level 1
    2021-04-23

    So I recently acquired a BH 550 head and had it for 5 days. On the 1st played with issues. On the second day that's when during used it will intermittently go into protection mode then shut off then a few seconds later come back on! I did the care ticket thing but was curious if anyone may have a more pragmatic solution?

     

    Thanks,

    Rap

    read more...
    0 55
    • Rapisme
      NicJonesMT Hi Rapisme.
      Please submit a technical support ticket and we can go through some trouble shooting with.
      Simply click "SUPPORT" at the top of the page and scroll down to the Technical support option.
      • Apr 23
    • Rapisme
      Rapisme

      Hi, did that already and received an email indicating that I’ll have to proceed to an authorized service center to receive out of warranty service?

      • Apr 23
  • New
    EdPolo
    Newcomer - Level 1
    2021-04-11

    Hi,

     

    I'm looking to get BG250-208 combo and RS112 cabinet to compliment my amp. However, they are not in stock at any retailer on Canada. Same thing with major USA web stores. However, none of them can confirm their ETA. TCE logistic people, do you have better idea when these are going to be shipped to North America? 

     

    Thanks,

    Ed

    read more...
    0 68
    • EdPolo
      Dale_M Hi Ed, it may be best to send s support ticket in from the tab above and use the PreSales dropdown, as the PreSales team are not on community we can pass this over to them to advise you. I hope this helps.
      • Apr 12
  • New
    DRSisco
    Newcomer - Level 1
    2021-04-05

    I am running a BAM 200 through a RX210 and a RS212 currently. I saw a video on your site that said  most TC Electronics bass amps could handle 3 cabinets, which would push the ohm load to 2.66ohms

    My question is will my little BAM 200 handle this, and if not which TC Electronics bass amp will?

    read more...
    0 67
  • New
    EdPolo
    Newcomer - Level 1
    2021-04-03

    Hi All,

    I'm building new bass rig and need to know is this going to work from technical perspective. Idea is to have portable and versatile rig.

     

    Amp: BG250-208, for rehearsals and small venues. It has external speaker out Min. impedance 8 Ohms.

    Cab: RS112, for bigger venues. When connected impedance will drop to 4 Ohms, giving me max power and of course me more speaker surface. 

    And for big venues with PA, both of them as personal monitor and DI out to console. 

     

    What do you guys and is this going to work from technical perspective? 

    Also, does anybody from TC Electronis have rough idea when these are going to be shipped to Canada? Cosmomusic (cosmomusic.ca) expects them but can't confirm timelines. 

     

    Thanks,

    Ed

     

     

     

    read more...
    1 78
    • EdPolo
      DavidKnighton Hello EdPolo,
      This should work fine. If anything the RS112 will provide you with more low frequency extension when coupled with the 208 cabinet. They're really designed to compliment each other rather than using one cabinet over the other. I would suggest using 208 for smaller gigs that don't require too much volume and then combine with RS112 anytime you need more umpff.

      As far as logistics goes, we can not give advise on how long it takes for an order to ship from manufacturer to Cosmo. That's pretty much out of our focus, and there's way too many variables to consider to make an educated guess. I suggest keeping in contact with Cosmo as to when they can expect their shipment.
      • Apr 3
      • New bass rig
        EdPolo Hi DavidKnighton,

        That’s exactly what I’m planning to do. 208 for smaller gigs and for bigger gigs where I need more power RS208 and RS112. And for big gigs where PA is required utilize DI out and use 208 as personal monitor.
        And if you please advise which kind of switch pedal I need to switch between two TonePrints effects?

        Thanks again,
        Ed
        • Apr 3
Go to page