Statistics

298,606 members
182,230 posts
  • New
    denfio
    Newcomer - Level 1
    2021-12-16

    Ive seen a bunch of threads asking the same question but, I do t see a concrete answer....  here goes...

     

    can I go from my Fender Blues Junior speaker output jack to the 8 ohm input on the PS1, connect the XLR to sound console and the big question....NOT use a speaker?

    read more...
    2 13
  • New
    willkelly
    Newcomer - Level 2
    2021-12-15

    I have a Bugera 333XL that makes a loud buzz or what I call "RRRRIIIPP" sound every time the power is shut off. 

    Has anyone heard this before? Is ther a fix for it?

    0 29
    • willkelly
      Midiman50 HI THERE, TRY THIS, PUT THE AMP IN STANDBY FOR ABOUT 30 SEC THEN TURN IT OFF - THIS IS HOW I SHUT DOWN MY 333XL AMP AND NO ISSUE, IF I DONT AND TURN OFF STANDBY AND POWER AT THE SAME TIME IT DOES THE SAME THING YOURS DOES.
      • Jan 5
    • willkelly
      PedroRodrigues Hi willkelly In this case I would suggest to disconnect any cables connected to your Bugera 333XL and only leave your power cord and then power off, please confirm that your Amp is connected directly to a wall socket. If you still identified the issue reported I would then suggest to follow the link below to submit an assistance request directly to our Tech Support Team: https://community.musictribe.com/pages/create-new-ticket?type=Technical%20Support&brand=Bugera Thank you
      • Jun 21
    • willkelly
      LUCASCOSTA indico a leitura do manual antes de usar, essa forma que está desligando o amplificador vai danificar ele e as valvulas com um tempo. No meu bugera 333 desligo stand by, aguardo 1 minuto e desligo o power, é o que o manual ensina
      • Aug 9
  • New
    baldypr
    Newcomer - Level 1
    2021-12-14

    I need j65-00001-02269 power traf for T-50, where I can purchase

    0 12
    • baldypr
      KyleJohnson Hello, Kyle here with Music Tribe. To order parts please click on Support and then Spare Parts.
      • December 14, 2021
      •  Bugera T-50
        baldypr Thanks
        • December 14, 2021
  • New
    ricaa
    Newcomer - Level 1
    2021-12-07

    I'm currently using a Focusrite 2i2 for recording and curious if the amp can replace it.

    I have a few questions using the V60 as an Audio Interface:

    1) Are the Guitar and Mic on 2 channels from the Amp to the DAW when connected to my Macbook Pro via USB? 

    2) I use Garageband, will it recognize the AMP and separate both channels as channel 1 and 2? 

    3) Can I monitor what I'm recording and/or include what has already been recorded through headphones plugged into the amp?

    4) How do I control the Gain for each channel (Mic / Guitar)?

     

    One unrelated question, is phantom power 48v or 24v?

    Thanks for the help, Ric

     

     

    read more...
    0 66
  • New
    underdog
    Newcomer - Level 1
    2021-11-30

    I AM LOOKING FOR A KNOB FOR THIS AMP. CAN ANYONE KNOW WHERE TO GET THEM. THANKS

    0 12
    • underdog
      Nigel67 Hi underdog. Please submit a ticket to our spares team and they will get back to you with pricing and availability. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. Many thanks
      • December 4, 2021
  • New
    marcicamp
    Newcomer - Level 1
    2021-11-05

    Hello! Need to connect a combo amp with external speaker output (labeled as parallel) to a bugera 212TS... The problem is that the internal speaker of the combo is 8ohm and the mono input of the Bugera 212ts could be 4ohm (internal parallel, i suppose) and 16ohm (series)... I wonder to know if I can in this configuration use only one speker of the 212TS, setting the stereo mode and connecting ONLY one jack... Is this connection possible and safe or in stereo mode I MUST connect both the input jack?

    Thanks

    read more...
    0 26
    • marcicamp
      Nigel67 Hi marcicamp. Please can you submit a Technical Support ticket for this question and one of the Team will get back to you with an answer. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket.
      • November 9, 2021
  • New
    marcicamp
    Newcomer - Level 1
    2021-11-05

    Hello! Need to connect a combo amp with external speaker output (labeled as parallel) to a bugera 212TS... The problem is that the internal speaker of the combo is 8ohm and the mono input of the Bugera 212ts could be 4ohm (internal parallel, i suppose) and 16ohm (series)... I wonder to know if I can in this configuration use only one speker of the 212TS, setting the stereo mode and connecting ONLY one jack... Is this connection possible or in stereo mode I MUST connect both the input jack?

    Thanks

    read more...
    0 21
    • marcicamp
      Nigel67 Hi marcicamp, please submit a Technical Support Ticket and a colleague will be able to answer this question for you. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. Many thanks
      • November 9, 2021
  • New
    paul510
    Newcomer - Level 1
    2021-11-04

    Hi, my bh250 owner amp has stopped working. All the other features (TonePrint, DI, eq and tuner) function, but I have nothing out of the Speakon connector. I unplugged it and removed the cover, then looked under the heat sink at the power chip. Oh my god! There is charting on the underside of the aluminium heat sink that looks like the components next to it have exploded. The heat compound has dried up, and it looks like this is what caused the problem. Is there any way to get a replacement board?

    read more...
    0 18
  • New
    Iamgloop
    Newcomer - Level 1
    2021-10-21

    Hi all, I'm having a real hard time with my burgera 333 head. The issue is with switching in between chanells on the head or foot switch. It will only stay on clean and won't switch to crunch/lead. It also intermittently switches the boost on and off from time to time. I had taken it to a tech who thought it was the relays and he changed these out. He then said it was tbe pcb board (PCB 722000REV) and would need replacing. He said it would be a simple install, however getting that part He said "seems impossible". Can anyone help me here? Many thanks

    read more...
    0 42
    • Iamgloop
      Dale_M Hi there for official support in this matter we would advise you go to the support tab above and open a Technical ticket so we can assist you.
      • October 22, 2021
  • New
    Chronox2
    Newcomer - Level 1
    2021-10-08

    Hello, I would like to know where could I buy the front plate from a 6262? Thanks in advance.

    0 15
    • Chronox2
      Nigel67 Hi Chronox2. Please contact our Spares team and they will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. Many thanks
      • October 8, 2021
Go to page