I've used the 'polychord' function to program multiple chords into the DeepMind 6, these play fine when triggered via the local keyboard (i.e. perform a chord with the press of a single key).

The problem arises when using external MIDI controllers. When I use an external keyboard controller the selected notes play, but I am unable to perform a 'polychords' with the press of a single key.

The following excerpt from p40 of the user manual seems to indicate that assigning polychords to fixed external MIDI note triggers might be possible, but the procedure isn't explained:

E – The letter E indicates that the poly chord is assigned to a fixed MIDI note trigger (E = external). The absence of an E indicates that the chord is triggered by the local keyboard.

Any help with this would be greatly appreciated :)

Morning, 

I am wondering why not many Behringer MonoPoly owners are talking about the noise clicks in the Envelope Generator. Even with the Oscillator levels down = 0, Noise level = 0, and filter fully closed the horrible noise is still present, and can be shaped depending on the VCA EG. This should not happen anmd can it be fixed/will it be fixed in a firmware upgrade? 

Secondly is the arpeggiator can be clocked nothing so far. Iv tried TRS Cable and a regular mono 1/4" jack with variouse trigger sources (RD8,Toriaz squid, Metropolis etc...) trying both V Trig +5V and +10V and S Trig with both + and - and still nothing. Can this or will this be fixed? 

Still not alot of word from behringer as far as i can see. i need to know ASAP though to decide whether i should return and get a refund. 

My next biggest question is, how can you sell a synth that comes broken out the factory for £600??? Madness?

Cheers, Lewis

I for the life of me cannot get this oscillator to stay in tune no matter how long I let it warm up. All of the VCO outs do not track correctly no matter which cv keyboard or sequencer I’m using. Has anyone had theirs repaired or replaced? If so where did you have to send it? I’m in the U.S.

My setup is, MS-1 receives clock from a DAW via USB, then outputs from MS-1 to volca sample via midi dim out.

The problem is MS-1 sends the time as double (if the daw is at 120bpm it sends 240bpm to the volca).

Is this the expected behavior?

Thanks.

Hi all or anyone ;-)
Being a total noob with Eurorack, I'm trying to get a Behringer 960 to control a Behringer 2600 - talk about frustration, might see if it will control my Moog Little Phatty! The video shows from the beginning 'til 1:36​ the S&H taking complete control, from 1:37​ to 2:56​ a minor improvement but still controlled by the S&H, from 2:57​ to end the 960 is in control but regardless of where I plug the patch leads in to the 2600 I can't pull it in.

If anyone has any ideas, I'm listening!

The video link shows what I'm doing and odds are where I'm going wrong ;-) https://youtu.be/2M8v8VER1B4

TIA
Taff

Behringer, 

I purchased a poly d in Feb 2021 from GUitar Centrr who stated it was in stock. But it wasn't and has been on back order. The dates keep pushing back for shipping. Now sweet water says it's in stock?? What's my best bet to get my hands on one? Cancel my order? Any advice is helpful. 
thanks

Master your Behringer 2600 for just USD 9.99! From April 19 to 25, you can get ask.video’s entire library of courses on the Behringer 2600 covering synthesis, music theory, mixing, mastering and much more.

Click on this link to get the course now: https://ask.video/behringer

Hello Behringer,

love your products as I have many of them. I preordered the blue Marvin with Sweetwater hours after it was announced.  Do you have any ETA on when these BMs will be available for those in the USA ordering through Sweetwater? It seems like more attention is going to the UK and thoman but it's been a month or two and still no insight has been provided on when the 2600 will be available for those waiting here in the states. Wishing you all the best. 

charles