Statistics

268,288 members
147,860 posts
  • Ydraig
    Newcomer - Level 1
    2020-09-22

    I have a Behringer UMC22 Audio Interface, and I use an Acenix K11 combined Headphone and Microphone with it.

    Using the Headphone Socket is fine to listen to music etc.

    I want to be able to use the Microphone on the Acenix K11 to record my voice via the UMC22, onto my Apple Macintosh computer.

    Can I use the Microphone on the Acenix K11 by plugging into the UMC22 Headphone socket? Or do I have to plug it into a different Input socket?

    Which of the UMC22 Controls can I use for Microphone use?

    read more...
    0 141
  • laurenturbain
    Newcomer - Level 2
    2020-09-22

    Voilà, en gros, le problème : le son entré (par l’entrée instrument) dans le périphérique n’arrive pas à l’ordinateur.

    Quelques précisons. Il s’agit d’une interface Behringer UM2. Elle est branchée en USB (2) sur l’ordinateur qui tourne sous windows 10. Lorsque je sélectionne ce périphérique comme sortie, je peux entendre le son dans le casque (qui y est branché). Lorsque je branche ma guitare à l’entrée instrument et que je sélectionne la lecture sans latence (en directe) le son arrive dans mon casque. Par contre je n’ai aucun son qui entre dans l’ordi (j’ai tenté de modifer l’amplification des différents canaux et du « master » sur le UM2). J’ai essayé directement avec la configuration périphériques -> niveau 0, rien. J’ai essayé avec audacity -> après quelques secondes le logiciel signal une erreur (999). J’ai essayé avec Reaper, il me dit qu’il n’y a pas de son en entrée. J’ai tenté guitare pro, idem. J’ai même essayé l’enregistreur de Windows qui me dit que je dois sélectionner la source, car pas de signal. Dans les périphériques par défaut j’ai bien sélectionné le UM2.

    J’ai également tenté d’installer un autre driver. D’abord j’ai plugé le UM2 sur l’ordi, Win 10 a trouvé immédiatement le pilote et l’a installé. J’ai également installé le pilote ASIO4ALL. ASIO est reconnu par la plupart de mes logiciels, mais pas de son. En cherchant un peu, j’ai trouvé une info comme quoi le pilote proposé par Windows n’est pas le mieux. J’ai donc désinstallé et réinstallé le pilote Behringer (initialement pour win 8). Le périphérique porte un autre non, ASIO est directement installé mais rien de mieux.

    J’ai également tenté, par l’onglet « écouter » de la config du périph d’activer, sauf que, étrangement, cet onglet n’apparait pas dans les propriétés de cette carte.

     

    Désolé pour cette littérature, j’ai tenté de donner une information correcte.

    Un grand merci d’avance.

    read more...
    0 188
    • laurenturbain
      laurenturbain This is basically the problem: the sound input (through the instrument input) in the device does not reach the computer.
      Some precisions. This is a Behringer UM2 interface. It is plugged in USB (2) on the computer running Windows 10. When I select this device as an output, I can hear the sound in the headphones (which are connected to it). When I connect my guitar to the instrument input and select latency-free (live) playback, the sound arrives in my headphones. But I don't have any sound coming into the computer (I tried to change the amplification of the different channels and the master on the UM2). I tried directly with the peripherals configuration -> level 0, nothing. I tried with audacity -> after a few seconds the software signals an error (999). I tried with Reaper, it tells me that there is no sound at the input. I tried pro guitar, ditto. I even tried the Windows recorder, it tells me that I have to select the source, because no signal. In the default devices I selected the UM2.
      I also tried to install another driver. First I plugged the UM2 on the computer, Win 10 immediately found the driver and installed it. I also installed the ASIO4ALL driver. ASIO is recognized by most of my software, but not by sound. While searching a little bit, I found an info that the driver proposed by Windows is not the best. So I uninstalled and reinstalled the Behringer driver (initially for win 8). The device carries another no, ASIO is directly installed but nothing better.
      I also tried, through the "listen" tab of the device configuration to activate, except that, strangely enough, this tab does not appear in the properties of this card.

      Sorry for this literature, I tried to give a correct information.
      If a person much more competent than me or having had the same worries and feeling altruistic could help me, I would be (almost eternally) grateful.
      Many thanks in advance.


      Translated with www.DeepL.com/Translator (free version)
      • September 22, 2020
    • laurenturbain
      RexBeckett This problem can be caused by Windows treating the UM2 as a mono source. There is a solution in these notes: https://community.musictribe.com/discussions/77059/297127/windows-10-and-stereo-usb-mixers-interfaces
      • September 22, 2020
    • laurenturbain
      RexBeckett As explained in the notes, Windows 10 does not require an additional driver for the UM2 - although ASIO4ALL can be used to reduce latency for DAW software that supports ASIO. There have been many reported problems when old versions of audio drivers have been installed in Windows 10. I recommend uninstalling the non-standard driver.
      • September 22, 2020
      • Pas de son UM2
        laurenturbain Thank you, I will try what is proposed and will come back for feedback.
        • September 22, 2020
      • Pas de son UM2
        laurenturbain Toujours rien lorsque j'utilise l'entrée instrument (INST 2). Par contre un son (de mauvaise qualité et pendant quelques secondes seulement) lorsque j'utilise MIC/LINE 1
        • September 22, 2020
      • Pas de son UM2
        RexBeckett Check the settings on the Advanced tab.
        • September 22, 2020
  • Dhreyne
    Newcomer - Level 1
    2020-09-22

    So I just bought a UMC22 and I'm hearing some unwanted loud hiss noises from the mic channel 1 when I adjust the gain higher, Is this normal?? I just hate it coz I need to higher the gain because the instrument's volume is too low but it hisses when I adjust the gain high. It really sucks for me,  BTW I'm using my computer as the playback

    read more...
    0 37
    • Dhreyne
      RexBeckett What make/model of microphone are you using? What instrument are you recording?
      • September 22, 2020
      • How do I eliminate unwanted hiss noises?
        Dhreyne I didn't plug any bro
        • September 22, 2020
      • How do I eliminate unwanted hiss noises?
        Dale_M I think it would be wise to check the unit on another PC/MAC to confirm if the issue stays with the unit
        • 1
        • ·
        • September 22, 2020
      • How do I eliminate unwanted hiss noises?
        Dhreyne Alrght I'll try
        • September 22, 2020
    • Dhreyne
      Dale_M Hi Reyan, can you advise if the hiss is there with nothing plugged in and sounds the same when you turn the gain up?
      • September 22, 2020
      • How do I eliminate unwanted hiss noises?
        Dhreyne yeap, only at the Mic/line 1, I didn't plug anything but when I turn the gain up, it hisses like crazy...
        • September 22, 2020
  • nothotmustard
    Newcomer - Level 1
    2020-09-21

    I purchased behringer u-phoria umc404hd from Amazon. It did not come w software, so I've been looking for it on the Behringer site. Having a hard time either finding the correct software or where to find it because the one I found under the software category is not loading. Instead Audacity pops up, but it will not recognize the interface.

    read more...
    0 228
    • nothotmustard
      RexBeckett What software are you looking for? The driver for Windows PCs is available from the UMC404HD product page. If you register your purchase (through the Support menu above), you will be sent a licence code for Waveform OEM DAW software.
      • September 21, 2020
  • marekz
    Newcomer - Level 1
    2020-09-20

    Hi there.

    I have some issues with my UMC22 and C-1 microphone.
    Maybe I'm wrong, but I think, if I plug the microphone jack to socket 1 in UMC22 and turn on 48V from the back panel, everything should work correctly.
    Can anybody tell me how correctly connect these two tools in one good working set? What I do wrong? With guitar, I have no trouble. But connection microphone to card make me more and more annoyed :) Probably I do something stupid I think.
    Somebody can help me?

    read more...
    0 70
    • marekz
      RexBeckett The C-1 mic should work when connected to the UMC22 XLR input and with 48V phantom power switched on. Phantom power is not available on the UMC22 jack socket.
      • September 20, 2020
    • marekz
      Goetz Hi Marek, make sure that you use a cable with XLR connectors on both ends! A XLR to 1/4" TRS cable for example will not work.
      • September 21, 2020
    • marekz
      marekz Yes, You have the right. I bought new correct cable and the microphone work perfectly. Thanks a lot!
      • October 19, 2020
  • MichaelRamsden
    Newcomer - Level 1
    2020-09-15

    Hello,

     

    I have a UMC404HD which for the most part is working fine. The problem I have is that it seems to appear to the computer as 2 separate devices (line 1,2 and line 3,4) rather than a single 4 channel device. Is this a quirk of Windows 10?

    I have the latest drivers installed.

     

    Any help gratefully received.

    read more...
    0 40
    • MichaelRamsden
      JoeRivers96 Hi Michael, this is expected behaviour of Windows 10 - it will show the inputs as two stereo pairs. In a DAW you will be able to select the inputs individually providing you create a mono track. Also, go into you sound preferences and select the interface - here you can make sure 4 channels of audio are entering your system.
      • September 15, 2020
  • Lennie
    Newcomer - Level 1
    2020-09-14

    Hi, 

    Due to the pandemic I'm having my drum lessons via zoom. 

    I have a roland electric kit and want to connect it to my laptop so my tutor can hear exactly what I'm playing. 

    Instead of the kit sound coming through monitor speakers then into the laptop mics to zoom. 

    Would the Behringer UMC 22 audio interface enable this, or any other interface? 

    Thanks. 

    read more...
    0 76
    • Lennie
      JoeRivers96 Hi Lennie - yes you can set the UMC22 as an input device on Zoom. However, a limitation with Zoom software means you will only be able to set one channel of input. It is not a multitracking software.
      • September 14, 2020
      • UMC22 Audio interface
        PatrickCorrigan I may be wrong, but I believe Zoom will sum the two channels to mono.
        • September 14, 2020
    • Lennie
      Lennie HI Joe, thank you for your reply.
      • September 14, 2020
  • Dhreyne
    Newcomer - Level 1
    2020-09-13

    So I ordered a Behringer UM2 USB Audio Interface from Shopee Philippines and I just wanna know how to Identify if it's legit or fake. I ordered the item from a likely small third party seller. The seller doesn't even reply to my messages but I had no other choice coz the other sellers we're out of stock and others to sell it for too high prices and others has a too large shipping fee although the ratings of this one are fine, 5 people bought the same product from the same store and all of them rated 5 stars. can anyone help me pls? coz I need it to record my music, and I'm sick of counterfeits.

    read more...
    0 499
    • Dhreyne
      Nigel67 Hi, it may be very difficult to identify whether it is real or not as some companies are extremely good at replicating products. Can you attach some pictures showing the front, back, top and the panel witht heserial number on and I will take a look for you, but cannot promise whether I can identify whether it is fake or not. Have you contacted our partner in the Philippines who are Joint Venture to see if the shop you purchased from is one of their resellers. If it is, then there is a good possibility that the unit is not fake. Hope this helps.
      • September 13, 2020
      • How do I authenticate a Behringer product?
        Dhreyne Okay thank you Mr, Turner, I got the unit here. I'll send you pics and give you the serial number ASAP. Godbless!
        • 1
        • ·
        • September 21, 2020
      • How do I authenticate a Behringer product?
        Dhreyne here it is sir, kinda strange... the data code is missing and it's made in China and I didn't see any warranty card????????????. The serial number is: S200507929AUX
        • September 21, 2020
      • How do I authenticate a Behringer product?
        Nigel67 Hi, it all looks genuine to me. Comparing the pictures to the renderings on the website, they look identical. https://www.behringer.com/behringer/product?modelCode=P0AUX Also the serial number is correct and very new, so if it was a clone they would have had to be extremely quick on copy that. I am 99.5% sure that this is genuine. Hope this helps, and have a great weekend.
        • September 25, 2020
  • RohitVarun
    Newcomer - Level 1
    2020-09-12

    Hello Friends,

    I just purchased a Behringer UMC22 Audio Interface. 

    I use a Lenovo Windows 10 laptop. I do not have studio monitor speakers. What I do have are a set of 2.1 channel multimedia speakers that draw power from an external AC source. Its 2200 w pmpo.  They have RCA connections for i/o. I've purchased a set of L and R cables that are Phono to RCA and connected from the rear of the AI where it says L & R into the rear of my subwoofer where it says L & R. Connections looks sturdy and they fit snugly. However, no sound from the speakers. I intend to route all Audio related cables from the Audion interface and not many cables to the laptop itself. Please help. I'm still in the physical setup process. Next I have to get into the software side.

     

    read more...
    0 124
    • RohitVarun
      john0121 Hi Rohit, have you set the UMC22 as your output device in your sound preferences? if you right click on the volume icon in your Windows computer you can open the sound settings and from the output device dropdown you should select USB audio codec (this is the UMC22). Then you should get output from the interface.
      • September 13, 2020
  • VictorChao
    Contributor - Level 1
    2020-09-12

    I have a UMC204HD and JBL LSR305 (studio monitors). The issue I've been having is occasionally the audio will stop working, say if I'm listening to spotify, if I pause and leave the room for a bit and come back, the audio will not work. I have to switch playback devices (to headphones plugged into PC motherboard) multiple times and wait for the audio to come back to the studio monitors.

    Another issue I have is the same thing with the headphones plugged in to the audio interface, if I'm playing a video game and using Discord, occasionally the audio interface will cut out the microphone and Discord BUT I can hear the video game clear, just can't talk into the microphone to Discord and hear people in the voice chat (but it will work fine if my headphones aren't plugged in to the audio interface).

    My setup is JBL LSR305 and an XLR microphone in to the audio interface. Headphones is plugged in to the PC motherboard. Two playback devices (audio interface, OUT 1-2; BEHRINGER UMC 204HD 192K) and HEADPHONES. Both running sample rate (2 channel, 24 bit, 48000 Hz) and with Exclusive Mode turned OFF. Running on UMC's drivers version 4.59.0 on Windows 10.

     

     

     

     

     

    read more...
    0 149
Go to page