Statistics

229,582 members
104,649 posts
  • whydavewhy
    Newcomer - Level 1
    2020-07-08
    Can the VoiceLive Rack be used in a mixing board’s Effects Loop to double vocals on multiple channels? (So the mics would be in different channels of the board, with varied send amounts on each channel, going to the VoiceLive Rack. Then the Lead Mute would be turned OFF on the unit. (Or does that only affect the lead vocal when a mic is plugged in directly to the VoiceLive Rack?)
    read more...
    0 69
    • whydavewhy
      kiskadar69 Would only the Double effect be turned on in the VoiceLive Rack? I think it would work. Lead Mute should be turned On.
      • July 9, 2020
    • whydavewhy
      Francois43912 I would love to learn if it is possible to get an inbound stereo signal into that loop?
      • July 23, 2020
    • whydavewhy
      kiskadar69 @Paul Francois: IMO it isn't possible. The mixers first mix the stereo channels into mono and send them to the mixer's Aux output. The TC-Helicon VoiceLive Rack also has a mono input.
      • July 24, 2020
  • DobaCaesar
    Newcomer - Level 1
    2020-07-07
    Hello
    0 33
    • DobaCaesar
      leah Hey DobaCaesar - What questions do you have about the VoiceLive 3 Extreme?
      • July 8, 2020
      • I need help with my VL3X
        DobaCaesar Yes I have the VoiceLive 3 Extreme.
        • July 18, 2020
    • DobaCaesar
      DobaCaesar Thanks! I figured it out
      • July 8, 2020
    • DobaCaesar
      DobaCaesar Hello Leah! I want to know if there is a new update for the VL3X? Because on the manual I saw on the preset number 10 is amazing grace but on mine is something else.Thanks for your help
      • July 17, 2020
  • BRymes
    Contributor - Level 2
    2020-07-07
    I'm learning to play Rage Against The Machine's "Killing In The Name Of", and I need to set up a phaser effect for the intro. I assume its in the uMOD parameters but I feel like I'm going in circles to attain a decent sound. Here's a link to Tom Marello discussing the intro part at 20:33. https://youtu.be/aJXzY9vhqZg I would appreciate any help that you can give me. Thank you.
    read more...
    0 39
  • Gerdski
    Newcomer - Level 1
    2020-07-03
    Hello, I can set a lot of levels in this nice machine, but I haven't found out yet where I adjust the overall voulme level for the complete Preset/Patch. Where is this setting? Yes, I have read the manual :-)
    0 77
    • Gerdski
      kiskadar69 There does not seem to be such a parameter. What is your original problem?
      • July 3, 2020
      • How to set Preset Level in Voicelive 3 Extreme
        Gerdski My original Problem is that I want to set the Presets evenly to avoid volume differences in live performance.
        • July 4, 2020
    • Gerdski
      kiskadar69 I think you need to come up with a workaround.
      • July 4, 2020
      • How to set Preset Level in Voicelive 3 Extreme
        kiskadar69 ..or ask TC-Helicon to include this parameter in the next VoiceLive 3 firmware version.
        • July 4, 2020
    • Gerdski
      FabioValdez in the main screen, turn one of the knobs under the screen and you will get in the level options.
      • July 4, 2020
    • Gerdski
      Gerdski Will try that, thanks!
      • July 5, 2020
  • SteveSalamone
    Contributor - Level 2
    2020-06-04
    0 54
    • SteveSalamone
      SteveSalamone

      I need some help with a basic setup. I have not used my Voice Live 3 in a long time. All I want to do is hook up my Korg Keyboard's midi's output to the VL3 Midi in. Use a footpedal to turn the harmony one above to turn on when I press it. For some reason I can not get the VL3 to follow my Keyboard chords. I am not sure what I am doing wrong.


      Would someone please walk me through a simple preset and what changes I need to make to the VL3 to make this work?


      Thank you in advance.

      • June 4, 2020
  • ILYICH
    Contributor - Level 1
    2020-06-01

    Hello dear all, 

    I am looking for the ways to separate dry and wet microphone signals on VL3X in order to have only-wet and only-dry signals coming out separately. I also wonder whether one could do it via the expression pedal? Basically have a dry signal and add all the effects into the mix via expression pedal.

    Also I know one can separate dry and wet signals via mono, yet I still hear the dry sound of my voice in the Right/Effects channel. Are these the remains of what is not being covered by the effects? Even on the hard-tune-harmonizer I still hear the base sound of my voice though...

    Curious whether there is something one could do?

    Many thanks in advance!

    ILYICH

    read more...
    0 56
  • bearaby
    Contributor - Level 3
    2020-05-07

    Can I connect the Perform V to my Allen & Heath mixer's Stereo input to add the Perform V as my effects processor for all mics instead of just one mic? The way I understand it, the Stereo Channel 4 on my mixer is designed to add an external effects processor into my effects channel for control; I guess you could have the mixer internal and external effects both being used. Is there some type of XLR output to Stereo channel cable that can do this?

    read more...
    0 30
  • AndrewHamilton
    Contributor - Level 1
    2020-04-22

    Ok, found this very strange. Just got my TC Helicon Acoustic Play and I LOVE it however I can very loudly hear myself pressing and off the pedals through I don't even know what. When I'm hitting my SPDNE Kick I can the sound of me kicking it through the helicon almost as much as I hear the stomp box itself. I think it might be coming through both the guitar and the microphone. As you can see in my set up it's not close to where I hit the pedals or anything, or I didn't think it was anyways but maybe that is it. 

    Has anyone ever had any issues like this themselves?

     

    Thanks 

    read more...
    0 75
    • AndrewHamilton
      AndrewHamilton

      So unfortunately I've singled it out and it seems to be a problem with the Guitar DI box within the Acoustic Play pedal. I'm just wondering has anyone ever experienced anything like this with this pedal or even any other pedal before??


      Thanks.

      • April 22, 2020
  • Galiano
    Contributor - Level 1
    2020-03-25

    Hola hoy me llegó el controlador vocal TC Helicón perform-v, al conectar la alimentación todas las teclas de mantienen encendidas en su color de On,  no cambiando de color por mucho que las toque. Es un defecto del producto? O un error de puesta en marcha y tengo que hacer alguna operación? Los efectos funcionan correctamente, pero al no cambiar los colores es complicado saber qué efecto está en funcionamiento. Me podéis ayudar ?

     

    read more...
    0 43
  • TonyFry
    Contributor - Level 2
    2020-03-10

    I've posted about this before and never really got a satisfactory answer, so I'm hoping for a better result this time. I want to record loops to a particular preset so I can integrate it into live performance. The problem is that I record a loop, save it to (say) preset 20, which is fine. However, the saved loop is then on every preset, which is completely useless.......
    Then, when the loop is erased, it comes back when the VL3 is switched off and back on again. 
    Someone suggested saving to a different slot within the loop but this doesn't work either. I want to save maybe 50 different loops to 50 different presets and I'm pulling my hair out trying to find a resolution. Can anyone help? Please ......?

    read more...
    0 157
    • TonyFry
      TCH-Rob

      What are your slot settings in the "looper" menu? Loops aren't saved to presets, but to one of the 50 loop slots; each loop slot saves loops A, B, and C. You can change your loop slot using the preset up down switches in the "UTIL" page in the looper. If you save the preset it will store the loop slot you had selected. 


      What likely happened is you had the same loop slot selected on multiple presets. Once you saved a loop to that slot, that loop was also selected on those presets. 


      Hope this helps, let me know if you have any questions!  

      • March 11, 2020
    • TonyFry
      TonyFry

      Hi TCH-Rob,


      Many thanks for this. I’m kind of discovering this for myself. I got hold of the latest User Manual for the VL3 yesterday and it has a much better section on the subject than the older manual I was trying to work from.


      I’ve got the basic gist of it (I think) but I do have a question. If I start to save slots to particular presets, should I leave slot 1 free for looping “on the fly” for other presets that don’t have any saved loops?

      • March 11, 2020
    • TonyFry
      TCH-Rob

      Hi @TonyFry ,


      I think that's a great idea; I'd probably leave slot 1 open because that's the slot that most presets default to.

      • March 12, 2020
    • TonyFry
      TonyFry

      hI @TCH-Rob 


      Hope you're well in these difficult times. I have a further question. I've been trying to use the Onsong midi capability to change the Step (according to the VL3 CC list it's CC No 115 plus a value that equals the required step number) but it doesn't seem to work. All other program changes work well via midi but i cant get this CC to work. Is there a VL3 setting that would enable this feature or does it just not work? The CC controls work well with other equipment such as BeatBuddy, so I'm wondering if I'm doing something wrong?


      Look forward to your reply.


      Best wishes, and stay healthy.

      • March 30, 2020
    • TonyFry
      TCH-Rob

      @TonyFry I've reached out to our testing team about this; that isn't regular behaviour, hopefully it isn't an issue with your indiviual unit!

      • March 31, 2020
Go to page