Statistics

289,557 members
172,075 posts
  • New
    elove1918
    Newcomer - Level 1
    2022-02-08

    Can i plug my dl 32 directly to dn9630 and then to my  DAW over usb and use the dl32 and the dn9630 like and interface

    0 12
  • New
    Alibek
    Newcomer - Level 1
    2021-11-25

    Hello! Can I use KT-Dante64 CM1 card in DN9650 to connect Midas Pro console to AES67 devices? Does the card supports AES67? Do I need any additional gear? 

    Thanks!

    0 11
  • New
    kountrykid
    Newcomer - Level 1
    2021-11-04

    Hello,

    As mentioned in the subject line, I'm trying to connect the brackets that came with my Klark Teknik DW20BR, so it can be mounted.  Though, the screws provided are too long after removing the black rubber feet that are originally mounted.  And, it doesn’t come with any shorter screws. Trying to figure out what I’m missing here? Thinking maybe I’m missing a step.

     

    Tony

    702-523-0126

    read more...
    0 9
    • kountrykid
      Nigel67 Hi kountrykid. It appears that you are doing everything correctly. The screws that you take out to remove the rubber feet should then screw straight back in. They screw back into an extruded aluminium case which should have threads made into it long enough for the screws to be tightened into. There is no pcb, etc in the way that they can be fouling on. The screws should be 15mm long. Can you confirm that they are this long? Either they are too long in the first place or the aluminium extrusion has not been threaded deep enough. I don't want you to force it, but can you try putting a little extra pressure on one of the screws to see if it tightens up any further. If not, then I would advise contacting the partner that you purchased the unit from and asking them for a replacement unit, making sure that they check the replacement unit so the screws do go all the way in when the rubber feet are removed. Have you checked all 8 screws? Many thanks
      • November 5, 2021
  • New
    Joinville
    Newcomer - Level 2
    2021-09-01

    Good day,

    Any idea on how to send audio of DM8000 USB to A computer (50 mtrs)?

    0 32