Statistics

187,703 members
57,650 posts
  • 2020-10-27

    How can i listen to the audio i am controlling on my android device headphone output with X air for PC or X air android?

    i

    I would like to use the headphone out.  

     

    it would be helpful if each person in the band could use the headphones out on their phones to listen while running X Air Q.

     

    Does it already do that?  

     

    read more...
    0 3
    • Gary Gnaedinger
      Rex Beckett Hi Gary, there is no audio present on the network connection so it is not possible to monitor through control devices (PCs/tablets/phones). You would need to add a wired or wireless IEM system to provide individual monitoring.
      • Tue at 9:20 AM
  • 2020-10-16

    I have been recording from my x32 card into Studio One and recently my eq sounds like the vocals are in a cave during playback. I have been recording with the same set up for years with no problem. I do not know if it is related to a firm ware update. Any ideas ?

    read more...
    0 9
    • BarryDunn
      Dave Morrison Have you loaded a backup scene to see if it's just a corrupted scene. I've found that my main scene gets corrupted over time—It is a computer after all. Could be corrupted firmware also, but I'd check the scene first.
      • Oct 15
    • BarryDunn
      BarryDunn I have been in the same scene. I'll check that. Thanks Dave... Will let you know.
      • Oct 15
  • 2020-10-10

    I have a behringer nx6000 amp, when I turn it on it seems to place itself into protect mode, used about 10 mins ago and was working fine can someone help or direct me to a customer service adviser or can I have a number or something 

    0 26
    • Luke Anderson
      Rex Beckett I suggest that you open a Care ticket. At the top of this page, click Support -> Create a Care Ticket and select Type: Service Request. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • Oct 10
  • 2020-09-29

    Ok this is such noob questions but I really want to know - i want to live stream, I do gaming stuff, I want to do some VO stuff eventually and I'm a bit confused all the audio i've heard coming from rodecaster sounds super crisp on everyones voice, but the GOXLR has faders to turn down different sounds which is good for streaming

     

    does anyone have experience with both of these (I know there is better and cheaper options but I really want a targeted answer of what people think) I can't for the life of me find a good comparison between these two on youtube sooooooooooooooooo would love some help

     

    thank you so much

    read more...
    0 5
    • Samantha Paddy
      Leah from Music Tribe Hey @SamPaddy ,

      The Go XLR can be used as a normal recording interface. It actually has the same Midas microphone preamps as our Behringer UMC audio interfaces. So, if you're looking for great sounding audio as well as some flexibility in recording your "in-the-box" audio sources for gaming, it seems like the Go XLR would be a great fit!

      Hope this helps!
      • Sep 29
  • 2020-09-24

    I went through the pain of creating an account  in order to access some pre-sales information for our band. We are building a new residential studio on the edge of London, have a significant seven figure budget as we equip the studios and build out our international touring rig for 2022.  We are fortunate to be a very well known band and based on my experience here, none of your brands will now find their way onto our shopping list.  Perhaps your company could innovate and utilise a contact phone number or even an email address for your customers. Heaven forbid. 

    read more...
    0 4
    • Bob Bob
      Kyle Johnson Hi Bob, Kyle here with Music Tribe. Thank you for your feedback and suggestions, I will pass this along. You can always contact us by submitting a Support ticket by clicking the Support link at the top of the page.
      • Sep 24
  • 2020-09-22

    I still have problems finding out how the several keys are working on this machine.

    Especially I can not figure out how to access the 2PPQ or 24 PPq and 48PPQ and select them to control the timing of my drum machine. It now seems to hang to the original settings I can control with the tempo knob and I can not change it like it should according the PPQ settings.

    BTW is there a simple map avialable to which knobs settings/combinations are there for the functions available? (like writing tracks or the above mentioned)

    It doesn't say anywhere in the manual and it would be very helpful as a reference when I use the TD-3 to make it control other devices and MIDI.

    read more...
    0 10
  • 2020-09-12

    OK I've been searching for days and can't find any up to date information. can anyone explain the "Signal tap" for the XAir Edit software? I have the XR18 as an Audio interface for my studio and need to be able to record AFTER the phase setting under "input".  i would think that all i would have to do is change all the red dots to neon green but it doesn't seem to work. 

    any help would be great.

    Cheers

    read more...
    1 14
    • jim Wilcox
      Gary Higgins I would suggest next trying the yellow (pre eq) tap point but perhaps looking at this section will help some...
      • Sep 12
  • 2020-09-12

    I purchased kt2a last year. I like this product. but i bought new tube's and kenetek t4b. how do i calibrate gain reduction? Thank you very much.

    0 32
    • Alexey Zuev
      Alexey Zuev what resistor do you need to adjust? I have instructions for la2a but they are not similar inside. Thank you so much
      • Sep 12
      • Kt2a calibration.
        Pedro Rodrigues Hi Alexey, unfortunately we do not provide any information for self-repair to end users, never the less I can leave a photo with the correct positions of the vacuum tubes that will assist you on that stage of the process. and also the meter calibration process, to perform that you should following these steps:
        Disconnect any audio cables from the rear panel, then turn the unit on
        Select ‘Reduction’ on the Meter Select knob
        Adjust the calibration knob until the meter reads 0 dB
        Still we recommend contacting one of our partners to request assistance, please follow the link below to contact the partner that is closer to your location:
        https://www.klarkteknik.com/buy.html
        • Oct 2
      • Kt2a calibration.
        Alexey Zuev Good afternoon, Rodriguez. this photo is not kt2a. And at the expense of information. I have a kt76 and had problems with it. a Musictribe support send me scheme last summer and I found the problem. now everything works great. It was for business. Do you have information that this is the same circuit as the LA 2A? I want to get the most out of this device. Thanks.
        • Oct 4
  • 2020-09-01

    Hi all,

    Novice user here do I need special drivers to use Uphoria UM2 on my laptop? if so where do i get them.

     

    0 8
    • john marshall
      Rex Beckett The UM2 is class-compliant so does not need special drivers for either Windows or macOS. On Windows, you can optionally install ASIO4ALL to reduce latency when using DAW software that supports ASIO. That is available from: http://www.asio4all.org/
      • Sep 1
    • john marshall
      john marshall That's great thanks. Any idea why play back sound on audacity is low?
      • Sep 1
      • Drivers
        Rex Beckett There are playback level controls through either Windows or Audacity. If you cannot see the playback level control in Audacity, click View -> Toolbars -> Mixer Toolbar. Also see if these notes help.
        • 1
        • ·
        • Sep 1
      • Drivers
        john marshall Thanks so much!! little problem seems to be the microphone "in" works great with Mic or instrument but line "inst" 2nd line doesn't do anything. Nightmare!
        • Sep 2
  • 2020-08-17

    Povedl jsem registraci xr18 a dostal jsem účtenku. Jak získám nahrávací software. Děkuji

    0 12
    • Miroslav Lev
      Rex Beckett You should get a download code by email. Keep watch on your email spam/junk folder. If it has not arrived after three days, send an email to [email protected] telling him the Care case number of your product registration.
      • Aug 17
Go to page