Statistics

306,000 members
190,345 posts
  • New
    shajivalavil
    Newcomer - Level 1
    2020-12-28

    hi

    I owned UMC204HD last week the problem is main output not working kindly guide me how i can set this

     

    0 62
    • shajivalavil
      ChrisEdwards1 Hi Shaji, if you have not yet done so I would recommend checking out the following setup video:

      https://www.youtube.com/watch?v=DABJYUNY2jw

      If you have followed these steps and are still experiencing issues I would recommend submitting a technical support case via the support tab for further troubleshooting to be carried out.
      • December 29, 2020
  • New
    GeorgeKatschke
    Newcomer - Level 1
    2020-12-23

    where do i get my redeem code for tracktion software?

    0 89
    • GeorgeKatschke
      ChrisEdwards1 Hi George, a redeem code for the Tracktion software should automatically be sent to you upon registration of your product. If you have already registered your product and have not received this code could you please confirm for me the case number for your registration? Once confirmed I will look further into it and send a code across if required.
      • December 23, 2020
      • Tracktion download code
        UdaiBaraily I didn't receive my code
        • December 23, 2020
      • Tracktion download code
        ChrisEdwards1 Hi Uday, could you please confirm the case number from your registration and I will investigate this further.
        • December 23, 2020
  • New
    Sushantduggal
    Newcomer - Level 1
    2020-12-16

    Here's the deal. 

    I have a yamaha RX-V485 receiver and Behringer   1202FX mixer. I want to route the video to projector (hdmi out) from my receiver, and at the same time I want to route the audio to the mixer. I am not able to do this, is there someone experienced same problem? Attached the workflow  

    Thanks!

     

    read more...
    0 99
  • New
    Huseyinonal71
    Newcomer - Level 1
    2020-12-10
    Hello, I can't record two channels with my umc204 sound card. I hear it from the left side of my headphone with audacity umc drivers installed.
    read more...
    0 131
  • New
    andyp13
    Contributor - Level 3
    2020-11-15

    Updated to new 1.09 Firmware on the Wing - the DAW options are not available anymore, the menue goes of the screen and the 'full' DAW option can not be accessed any more. So much for testing eh?

    If anyone has a work around please could you email me as I will never be able to find this post ever again once I have pressed send.

    [email protected]

    Thanks

    read more...
    0 99
  • New
    juangeba2
    Newcomer - Level 1
    2020-11-06

    Hola, alguien me puede ayudar? tengo consola X1204 usb y necesito grabar en REAPER en modo multipista en vivo y no encuentro los drivers para hacerlo. Gracias si me pasan info. Saludos

    0 77
    • juangeba2
      RexBeckett Hello Juan, Windows supports the X1204USB using its standard USB Audio Codec driver. You can optionally install the ASIO4ALL driver to provide an ASIO interface to give lower latency with Reaper and other DAW software. The USB interface in the X1204USB is stereo so the DAW will record the main mix. It does not provide multitrack recording of individual channels.
      • November 7, 2020
    • juangeba2
      juangeba2 Gracias Rex, tenia la esperanza de que existieran los drivers.... gracias y saludos
      • November 9, 2020
  • garygnaedinger
    Newcomer - Level 1
    2020-10-27

    How can i listen to the audio i am controlling on my android device headphone output with X air for PC or X air android?

    i

    I would like to use the headphone out.  

     

    it would be helpful if each person in the band could use the headphones out on their phones to listen while running X Air Q.

     

    Does it already do that?  

     

    read more...
    0 102
    • garygnaedinger
      RexBeckett Hi Gary, there is no audio present on the network connection so it is not possible to monitor through control devices (PCs/tablets/phones). You would need to add a wired or wireless IEM system to provide individual monitoring.
      • October 27, 2020
  • BarryDunn
    Newcomer - Level 1
    2020-10-16

    I have been recording from my x32 card into Studio One and recently my eq sounds like the vocals are in a cave during playback. I have been recording with the same set up for years with no problem. I do not know if it is related to a firm ware update. Any ideas ?

    read more...
    0 67
    • BarryDunn
      DaveMorrison Have you loaded a backup scene to see if it's just a corrupted scene. I've found that my main scene gets corrupted over time—It is a computer after all. Could be corrupted firmware also, but I'd check the scene first.
      • October 15, 2020
    • BarryDunn
      BarryDunn I have been in the same scene. I'll check that. Thanks Dave... Will let you know.
      • October 15, 2020
  • Cloud21
    Newcomer - Level 1
    2020-10-10

    I have a behringer nx6000 amp, when I turn it on it seems to place itself into protect mode, used about 10 mins ago and was working fine can someone help or direct me to a customer service adviser or can I have a number or something 

    0 162
    • Cloud21
      RexBeckett I suggest that you open a Care ticket. At the top of this page, click Support -> Create a Care Ticket and select Type: Service Request. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • October 10, 2020
  • Danilo1
    Newcomer - Level 1
    2020-09-22

    I still have problems finding out how the several keys are working on this machine.

    Especially I can not figure out how to access the 2PPQ or 24 PPq and 48PPQ and select them to control the timing of my drum machine. It now seems to hang to the original settings I can control with the tempo knob and I can not change it like it should according the PPQ settings.

    BTW is there a simple map avialable to which knobs settings/combinations are there for the functions available? (like writing tracks or the above mentioned)

    It doesn't say anywhere in the manual and it would be very helpful as a reference when I use the TD-3 to make it control other devices and MIDI.

    read more...
    0 72
Go to page