Statistics

285,593 members
167,577 posts
  • New
    vmorgan
    Newcomer - Level 1
    2022-05-18

    Hi,

    I have a Midas 32R that I'm demoing at a house of worship that is transitioning from a board that has 1/4" outputs. I did not have enough 1/4" female to XLR female adapters so I decided to use the AUX Outputs on the Midas to set up the monitor mixes.  I patched MixBus 1-5 respectively to each of the Aux Outputs 1-5 and set the tap point to PreFader + M. I can control the individual channel volume in the mix, however, I cannot control the overall mix volume. Is there are setting that I am missing?

    read more...
    0 5
    • vmorgan
      Paul_Vannatto Either there is a routing error or a parallel signal path. The best thing to do is to export your scene to a file, save to the cloud (eg. Google Drive, Dropbox, etc.) and provide the shareable link in your next post. That way we can have a look and better advise.
      • May 18
    • vmorgan
      vmorgan

      Thanks. I factory reset the mixer. The issue was due to the tap point for the MixBus. The factory reset set the tap point for the MixBus to Post Fader. I now have Master control over the mix.

      • May 19
  • New
    tdukstein
    Newcomer - Level 1
    2022-05-18

    Does anyone know if there is currently a training course for the m32, I currently run one thru a few production companies but feel i could improve my navigation around the console as well as patching capabilities.

    0 5
    • tdukstein
      Paul_Vannatto M32 and X32 DSP (screens, routing, etc.) are identical. So any X32 training also applies to the M32. Only the control surface (faders, knobs, etc.) preamps and physical outputs are different. Therefore any X32 training will also apply to the M32. Drew Brashler has a number of excellent tutorials on YouTube.
      • May 18
  • New
    kenspi
    Newcomer - Level 1
    2022-05-16

    We would like to connect a pair of stage boxes to the M32 in a house of worship. Ideally it would be one DL32 and one DL16.

    My intention is to have the DL32 backstage to handle all of our FOH outputs as well as our stage monitors and IEMs, plus the inputs from wireless mic receivers also installed backstage.  The DL16 would be on the stage to handle inputs from drums and other instruments, plus utilize the Ultranet connection for personal monitor mixers.  The stage boxes would have a connection to the M32's AES50 A & B jacks.  Are there any limitations on this setup, such as total usable inputs/outputs? Are there any benefits or down-sides to connecting each to a different AES50 bus?

    read more...
    0 13
    • kenspi
      Nigel67 Hi kenspi. AES50 at 48K allows 48 channels bi-directionally so there would be no limitations at all connecting a DL16 and DL32 in series with each other. The only reason that I can think of for connecting the DL16 to AES50 A and DL32 to AES50 B on the M32Live would purely be for the possibility of damage occurring to the AES50 cable between the DL16 which is on stage and the DL32 which is backstage. What I am trying to say is that is may be easier to route the cable direct from the M32 to the DL32 than go from the DL16 to DL32. Apart from that, except for the physical routing in the patching page of the M32, either way is identical.
      • May 15
  • New
    stefaniaoctaviana
    Newcomer - Level 1
    2022-05-09

    Hello, I'm a customer from Romania and I want to buy an Midas M32 Live console but I can't find any. Can you give me an approximate date when the console will be available to purchase in Europe? Thank you! 

    0 6
  • New
    Miradorabe23
    Newcomer - Level 1
    2022-05-03

    Bonjour,

    Ma table Midas X32 LIVE n'est plus reconnue par mon Mac. J'ai l'habitude de faire des enregistrements dessus avec la cable USB et tout d'un coup la table n'est plus visible par le Mac (il n'y rien qui apparaît lorsque je branche le cable USB). J'ai déjà changé d'ordinateur, de cable USB etc... mais rien ne change.

    Pourtant l'enregistrement avec les cartes SD marchent nickel.

    Merci!

    read more...
    0 13
    • Miradorabe23
      Paul_Vannatto Make sure that you have the USB cable from the X-Live card plugged into a USB 2.0 port in the Mac. It doesn't work very well in a USB 3 port.
      • May 4
  • New
    jovanni
    Newcomer - Level 2
    2022-05-02

    Hola, me gustaria ir a realizar la certificacion de midas pro como lo puedo hacer?

    0 18
  • New
    Tykeys2006
    Newcomer - Level 1
    2022-04-30

    Having issues connecting my router and iPad to m32r and can't connect to iPad it keeps saying listening and never connects 

    0 7
    • Tykeys2006
      Dale_M Swap the netwrork cable, try another router, try another iPad and see if the issues stays at the console.
      • Apr 29
  • New
    Timkanter
    Newcomer - Level 1
    2022-04-26

    A pro9 we have is acting strange. Mc1 and mc2 seem happy, but only mc1 eq selections work, and the pop up happens on both screens. The center navigation doesn't work (patching/metering etc.) The two trackball mice work independently as they should. 

     

    Any ideas on why this is happening?

    read more...
    0 15
    • Timkanter
      Dale_M Do you think you could submit a Technical ticket from above with a video link to what you are seeing please so we can help you?
      • Apr 27
  • New
    JTF4
    Newcomer - Level 1
    2022-05-14

    Hello!

    Does anyone here have the OSC control documentation for the midas pro series? I'm working on integrating them into companion, but I'm having trouble digging up good references on their protocol.

    0 8
  • New
    DANMOLINA
    Newcomer - Level 1
    2022-04-28

    is the Midas M32 discontinued as well as Behringer X32? 

     

    I urgently need to buy 2-3 audio consoles for a college. I would be hestitant to purchase X32 and/or M32 for fear of discontinued resource, etc 

     

    Could anyone from Midas advise on this please?

    read more...
    0 31
    • DANMOLINA
      Dale_M The M32 is a legacy product but the succesor M32-LIVE is still current, both however are still supported as they bothe run the latest 4.06 firmware as does the Behringer X32 which is still current. I hope this helps.
      • Apr 28
      • is the Midas M32 discontinued as well as Behringer X32?
        jd3994 How about the M32C?
        • Apr 28
      • is the Midas M32 discontinued as well as Behringer X32?
        DANMOLINA M32C shows "current" status. However, X32 core is legacy.
        If you search up on Behringer or Midas website it lists past and present products and shows "LEGACY PRODUCT" when discontinued.
        • Apr 28
Go to page