Statistics

259,803 members
138,221 posts

Sort

Sort

Discover

  • New
    albucristian83
    Newcomer - Level 1
    2021-11-25
    Pre-emphasis functionality on the KT-2A (2A-KT) leveling amplifier | Compressors / Limiters

    Hello,

    Reading the product manual for the KT-2A leveling amplifier, found this written:

    "The controls on the 2A-KT consist of a Pre-Emphasis trimmer which adjusts the compressor / sidechain interaction. When set fully clockwise, the sidechain responds to the full frequency bandwidth of the incoming audio. As the trimmer is turned counterclockwise, the compressor responds less to the signal's high frequency transients."

    Shoudnt be the opposite for counterclockwise rotation? Meaning the compressor reacts more to high frequency acting like sort of a de-esser?

    I ask this because this is the functionality I know the older LA2A units have...

    Many thanks for reply and clarification.

    BR,
    Cristian

    read more...
    0 0
    0
    Mark As Solved 0 Reopen Discussion 0
  • New
    Alibek
    Newcomer - Level 1
    2021-11-25
    KT-Dante64 CM1 card and AES67 network. | Audio Converters

    Hello! Can I use KT-Dante64 CM1 card in DN9650 to connect Midas Pro console to AES67 devices? Does the card supports AES67? Do I need any additional gear? 

    Thanks!

    0 2
    0
    Mark As Solved 0 Reopen Discussion 0
  • New
    husnain9
    Newcomer - Level 1
    2021-11-24
    Klark Teknik DMA-8500 Audio Channel Configuration Module | I/O Interfaces

    Hello Team,

    This is Husnain from Pakistan and i have 100 audio processors Model: DMA-8500 each piece is for each classroom of different universities. Can anyone please help to suggest how can i use all input channels as i have 8 mics in each classroom. 

    Senerio is like i have 2 speakers which are connected with amplifier 2 seperate channel. Microphones connected with Digital Audio Processor work with first 2 channels but other channels are not working as it has to be configured. I would appreciate if anyone can share configuration mannual so all 100 devices can be configured accordingly. Thanks

    regards,

    Husnain 

    Email: [email protected]

    read more...
    0 8
    0
    Mark As Solved 0 Reopen Discussion 0
  • New
    Davpis
    Newcomer - Level 1
    2021-11-23
    KT-2A | Compressors / Limiters

    When will these be available again? I've been waiting over a year with Sweetwater it's backordered

     

    thanks

    0 3
    0
    Mark As Solved 0 Reopen Discussion 0
  • New
    kountrykid
    Newcomer - Level 1
    2021-11-04
    Trying to connect brackets on Klark Teknik DW20BR | Audio Converters

    Hello,

    As mentioned in the subject line, I'm trying to connect the brackets that came with my Klark Teknik DW20BR, so it can be mounted.  Though, the screws provided are too long after removing the black rubber feet that are originally mounted.  And, it doesn’t come with any shorter screws. Trying to figure out what I’m missing here? Thinking maybe I’m missing a step.

     

    Tony

    702-523-0126

    read more...
    0 3
    0
    Mark As Solved 0 Reopen Discussion 0
    • 1 Replies
      Oldest
    • kountrykid
      Nigel67 Hi kountrykid. It appears that you are doing everything correctly. The screws that you take out to remove the rubber feet should then screw straight back in. They screw back into an extruded aluminium case which should have threads made into it long enough for the screws to be tightened into. There is no pcb, etc in the way that they can be fouling on. The screws should be 15mm long. Can you confirm that they are this long? Either they are too long in the first place or the aluminium extrusion has not been threaded deep enough. I don't want you to force it, but can you try putting a little extra pressure on one of the screws to see if it tightens up any further. If not, then I would advise contacting the partner that you purchased the unit from and asking them for a replacement unit, making sure that they check the replacement unit so the screws do go all the way in when the rubber feet are removed. Have you checked all 8 screws? Many thanks
      • Nov 5
  • New
    sebastienP
    Newcomer - Level 1
    2021-11-04
    Klark Tecknik DM 8500 | Monitor Controllers

    HI All

    I search an update firmware for DM 8500

    Someone can help me ?

     

    Thanks

    0 11
    0
    Mark As Solved 0 Reopen Discussion 0