Statistics

254,618 members
132,321 posts
  • New
    fx2tz1209
    Newcomer - Level 1
    2021-10-24

    Hi,

    i would like to work with my old M2000 via sysex commands.  However, the only documention on that topic, available from TC, is for the M3000.

    https://mediadl.musictribe.com/download/software/tcelectronic/tc_electronic_m3000_midi_sysex_specifications.pdf

    I would be interrested in how the implementation for the two units differs.

    Example preset request to the M3000 (from the PDF above)
    0xF0       Sysex start
    0x00       TC Electronics ID
    0x20
    0x1F
    0x00       Device ID (can be set on the unit itself)
    0x42       M3000 model ID
    0x45       SYXTYPE_PRESETREQUEST
    [0x00 | 0x01 | 0x02]        Single engine 1, Single engine 2, Dual
    <Preset MSB>                preset number
    <Preset LSB>
    0x0F   Sysex end

    Considering the sysex request :
    1. Can i assume that the request from the M3000 will also work with an M2000, since both units are very similar ?
    2. I don't know about the model ID of the M2000, which has to be put into the request code (see above).
        Does anybody has this information ?
    3. Same questions 1,2 for the TC Reverb 4000


    I would very much appreciate any info!

    Thanks, Frank

    read more...
    0 0
  • New
    timhoo1985
    Newcomer - Level 1
    2021-10-20

    Hopefully someone has a bit of info that can help. I've searched this topic with no results, here and the hellscape that is Google. My Mic Mechanic 2 powers on but only has the power indicator LED lit. The footswitch does not functon and the tone button LED does not light up. This situation started out of the blue. It worked one day and not the next. I have tried connecting it to Voice Support 2 to check for corrupted presets and to update the firmware, however, when the device scan completes, I'm notified that the Mic Mechanic 2 is in use by another application (possibly google chrome as it sometimes accesses MIDI devices automatically). I've tried this with multiple cables, reinstalled Voice Support 2, restarted the computer, ect. ect. PLEASE HELP :'(

    read more...
    0 5
  • New
    nektarios303
    Newcomer - Level 1
    2021-10-19

    Hi,

    I own a pair of KT-2As (and 76-KTs) and wanted to ask two questions.

     

    1) Upon using stereo link and calibrating the two units with a 1khz test tone, using the Stereo Link trimmer at the back to get the same amount of gain reduction, I get different amounts of gain reduction between the two units when I move the Peak Reduction. The test tone is a mono signal sent to two outputs of my soundcard. No faders hhave been touched in my soundcard's mixer, the stereo output pair I am using on my soundcard, shows the same signal between the two outputs I am using for Left and Right that are the inputs to the KT-2As.

    So I am using them unlinked which is fine, but the bottom unit in the photo, needs to have the Peak Reduction pot much more CW than then top unit to show the same amount of gain reduction. How do I go about calibrating the unit so that it behaves like the top one?

     

    2) My units are running hot. I can put my hand on them, but they are very hot.

     

    Do other KT-2A owners experience these two behaviiours I am?

     

    Cheers!

    read more...
    0 5
  • New
    MassimoPalma
    Newcomer - Level 1
    2021-10-07

    Good morning to all

     
    Since you're very helpful with my worries related to my G-Force, here I am again with a question. Due to a battery exchange, I am rebuilding all my presets now. I loop my G-Force into a Marshall JMP-1 and simply need to parallelly switch presets on G-F and JMP with my foot control. I somehow switched something wrong and now the G-F preset won't change when I press the foot switch. I tried to figure out, but I am lost... can you help?
     
    Thanks again for your support and best regards
    Massimo

     

    read more...
    0 2
  • New
    AshleyKitson
    Newcomer - Level 1
    2021-10-01

    I've had my VL3 a year or so now.  As far as voice goes it's brilliant.  However, I play 3 acoustic instruments in a live gig: 6 string, 12 string and a bazouki. I've figured out I need an off board input controller to adjust the input signals from three into the VL3. Now I just need to be able to step on the program pedal and know that all the basic tone, reverb etc is correct for the instrument I am playing. I Can get it right for one. How do I get it right for all three.

    read more...
    0 5
  • New
    RaynaldoMartine
    Contributor - Level 1
    2021-10-09

    I have racked my brain trying to create a reasonable phase shifter in my Voice Live 3 Extreme. I change all of the parameters in the flanger, but it never gets close enough to use on the gig. Some of the other users posted a few ideas to try but no luck. PLEASE! Does someone have a workable solution?

    Also, TC Helicon staff, 1) could we please get this as a firmware upgrade?

                                    2) Get JUST Aux, and guitar for looping? (No vox). This way, we can create a soloing track while we sing?

                                         I'm using my aux for the drums I play with my foot.

                                          https://youtu.be/63qJ7P0TVwo

    read more...
    0 12
    • RaynaldoMartine
      PedroRodrigues Hi RaynaldoMartine, thank you for your post, please consider that the VOICELIVE 3 offers an Inverse Phase effect but not a phase shift, a phase inversion is neither a time shift nor a phase shift, but simply a swap of plus and minus.
      The phaser and flanger create very similar sounds and can be used interchangeably, the flanger can sound more extreme than a phaser, so phasers can be used when more nuance is needed.
      Often confused due to their similarity, these processors all incorporate phase shifting in different ways.
      To set up the flanger on your unit please see the images below.

      To help you on your creative direction it may be useful to follow the link below:
      https://producelikeapro.com/blog/flanger-vs-phaser/

      When it comes the Firmware upgrade for your unit please consider that all the firmware are accessible via VOICESUPPORT 2.
      When it comes to new features on this unit please take in to account that this unit has been replaced by the VOICELIVE 3 EXTREME therefore we will not perform any more development on the VOICELIVE 3.

      Thank you
      • Oct 13
    • RaynaldoMartine
      RaynaldoMartine

      Hi Pedro. Thank you for your detailed (and helpful) response. 1st: The image you told me to refer to, was an image of a dog eating a cupcake. Pretty sure that was a mistake. LOL! 2nd: I actually own 3 Voicelive Extremes (I play 6 nights a week, and I 've had to send two of the units back to Sweetwater for repairs at different times, but always need one for the gig, and a spare in the truck for backup. As a VL3 owner, I would like to still make my request for the firmware upgrade?


      Get JUST Aux, and guitar for looping? (No vox). This way, we can create a soloing track while we sing?


      I'm using my aux for the drums I play with my foot.


      https://youtu.be/63qJ7P0TVwo

      • Oct 13
  • New
    oldale
    Contributor - Level 1
    2021-10-08

    Where can I download the G-System Editor software?

    0 9
  • New
    kennew
    Newcomer - Level 1
    2021-10-08

    The mono input on my Flashback 1 is intermittently cutting out.  How do I send it in for service?  Or is it even worth doing that?   Service charges can often rival the cost of replacement.  Thanks

    0 3
  • New
    JohnWashington21
    Newcomer - Level 1
    2021-10-05

    Anyone help please. 

    I have a brand new Dunlop X 8 volume/expression pedal but when I use it in expression mode I simply cannot use it to alter an effect level from 0 (heel down) to say 50 (toe down). 

    I have calibrated the pedal (in fact tried manual and automatic) and I know for certain that I am assigned the exp pedal correctly on the board and parameter I want to affect -- in this case the reverb effect level. 

    On the dunlop pedal there are switches/level controls inside but I've tried every combination possible and I simply cannot get it working. I know it's connected correctly. 

    please help before it gets sold 

    read more...
    0 8
    • JohnWashington21
      PedroRodrigues Hi JohnWashington21, thank you for your post, please consider that there is an expression modifier for each TonePrint which can be selected when assigning the EXP in the setting menu of the PLETHORA X5.
      This expression modifier is fully mappable in the TonePrint App including end-points, direction of travel, taper and up to 3 parameters simultaneously.
      Please take in to account that this is a slow process to implement
      Please follow the link below to access a video that mentions this on minute 22:11
      https://youtube/FJvbOLWiYpQ
      Thank you
      • Oct 6
  • New
    DC48Volts
    Newcomer - Level 1
    2021-10-03

    Hi, 

    Where can I find Lake training in NYC? 

    Kindly,

    - J 

    0 13
    • DC48Volts
      Dale_M Hi there, it may be best to address this on a pre sales ticket from the support tab above,
      • Oct 3
Go to page