Statistics

229,577 members
104,644 posts
  • New
    CodyD
    Newcomer - Level 1
    2021-05-12

    Howdy all,

    How to I route the Talkback mic from the M32 out through a DL32 that is connected to a Livemix system that we use for IEMs?  All stage boxes and wireless receivers are being split from stage and with one going in to the DL32 and the other into the Livemix monitor system.  I have all channels from stage and into M32 console routed out through the DL32 to FOH.  I only need talkback to get out to the IEMs and have not need to get talkback to FOH.  Any help is appreciated and sorry if anything is confusing as I've only been learning the nuts and bolts the past 6 months so fairly novice.  Thanks!

    read more...
    0 8
    • CodyD
      DavidKnighton Hell CodyD,
      You can freely assign the TB External option using USER routing. The TB Internal is for consoles with the built in microphone, which I believe is only featured on X32, so make sure you use the TB External. The caveat to this method is that the TB routing functions on the mixer surface are bypassed. If you want to incorporate the TB switches, then you'll need to get a little more creative by routing the TB to a mix buss and then using the output of the mix bus as your send. Or you could return the mix bus output to an input channel and then send it that way. There are a few ways to do it. Mostly just depneds on how exactly you need the TB to function.
      • May 14
    • CodyD
      LeonelPer Ou trrouver le logiciel de montage pour mon mixage xenixQX1202USB achette il yjours merci .
      • May 16
  • New
    brettgardner
    Newcomer - Level 1
    2021-05-12

    I just want to say thank you so much for providing good quality support for us. 

    I have an issue with my UV meter. Can you please share the steps to fix the issue so that I get the correct reading. routerlogin

    read more...
    0 4
    • brettgardner
      Nigel67 Hi Brett, please can you give more information on which product you are having issues with and what the issue is? The link you have given (router login) only goes to a router manufacturers login sire. Thanks. If you have an issue with one of our products, then you may be better submitting a Technical ticket where we will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. A colleague will then get back to you with further help.
      • May 16
  • New
    Romerdecaracas1
    Newcomer - Level 1
    2021-05-11

    Is it possible to increase the 5 minutes per side looping tempo in the ditto x4, by inserting a bigger data capability sd card?

    Thank you.

    0 6
  • New
    alexcolm
    Newcomer - Level 1
    2021-05-11

    Salve ho appena acquistato un mixer x air 18, ma usando sempre mixer analogici ammetto che questo mi porta qualche difficoltà, ma non conoscendo l'inglese non capisco nulla nelle istruzioni, qualcuno potrebbe passarmi istruzioni in italiano sia primo accesso che quelle generali? Vi ringarazio per l'attenzione in ogni caso a presto

    read more...
    0 3
    • alexcolm
      Nigel67 Hi alexcolm, I am very sorry, but we do not have a user manual or quick start guide written in Italian.
      • May 11
  • New
    TommyGunz
    Newcomer - Level 1
    2021-05-11

    Ive recorded all my vocals but id really love to play with some of the effects in my tc helicon vocal rack.. any suggestions of how to setup & route?

    0 3
    • TommyGunz
      DavidKnighton Hello Tommy,
      Pretty easy to do, just take the vocal track and send it to a discreet output in Logic. Presuming you have an interface, take the discreet output and plug it into the TC Helicon rack. Take the output of TCH Rack and plug it into your interface input. Then assign that input to a new track in logic and hit play/record. The vocal track will play, feed into the rack, and the return signal will record simultaneously. Now, you may notice a slight offset between the start of the vocal track and the start of the effect track. This is because of the latency between digital to analog to digital. Don't worry too much about this, as you can always drag the track to align later on.
      • May 14
  • New
    tomas83
    Newcomer - Level 1
    2021-05-10

    Hi,

    I'm new to the forum and to the MA400. Only planning on using the monitor I put to get the band's mix. I'm using a MXR DC Brick and I do have some space for 18V output for the MA400 (manufactures states 12V). Would I cause any damage to the MA400 if I power it from the DC Brick rather then it's own power supply?

     

    Thanks in advance. 

    read more...
    0 8
    • tomas83
      ChrisEdwards1 Hi tomas83, we would always recommend using the supplied power supply if possible. If you do need to use a third-party power supply please make sure all specifications are the same as the supplied power supply and what is stated within the user manual.

      If damage is caused due to an incorrect power supply being used this will void warranty(if applicable)
      • May 11
  • New
    cpaamit1
    Newcomer - Level 1
    2021-05-10

    Hi all,

    I am new here. Just want to ask a simple question - can  I connect behringer PA 500BT system with TV so can do karaoke. Currently using my mobile to read the lyrics and thus have to give and take mobile depending whose lyrics currently are. I am thinking it will be easy to read lyrics on TV by the person singing the songs.

    read more...
    0 9
    • cpaamit1
      Nigel67 Hi cpaamit1. You just want to send audio from the TV to the PPA500BT? If so, then that shouldn't be an issue, you just need to see what connections you have on the rear of the tv will will give an audio output. If the tv has phono outputs, then you can plug them to the phono inputs on the PPA500BT. Depending on the type of output from the TV, you may have to play around with the tv volume control. Have just checked my tv and it only has HDMI outputs, no phono, so you may have to buy some type of HDMI - phono adapter as well. Hope this helps
      • May 11
  • New
    BenH
    Newcomer - Level 1
    2021-05-10

    I just got my Odyssey, so am still finding my way around.

    The only way I can find to switch to monophonic is by using the OSC 2 sync switch, as far as I can tell.

    Is there another way, so that the keyboard is monophonic as opposed to duophonic - so that instead of a second note being played, the second note simply moves the note to the new pitch when playing legato? - like a moog does.

    Thanks,

    Ben

    read more...
    0 1
  • New
    Blomenkamp
    Newcomer - Level 1
    2021-05-10

    The EHX Super Switcher has two control switch outputs. They can be configured for NO, NC, and latching or momentary.

    I've been able to get the channel switching to work, however, I can't get the reverb to switch on/off. I would prefer to switch everything from the Super Switcher, rather than just using a whole separate footswitch.

    I've tried running a TRS cable from the G5 footswitch jack, and splitting it into two TS connections, into the CTRL outputs on the superswitcher. The channel switching works, but the reverb doesn't. In fact, both control outputs seem to control the channel switching.

    read more...
    0 7
  • New
    MikeHudson
    Contributor - Level 2
    2021-05-09

    Is there a way to make the scribble strip stay on the channel name in SOF mode?  Mine switches to the "tap point" which makes it difficult to move quickly through a monitor mix.

    0 7
Go to page