How many channels?

Contributor - Level 2

2012-07-15

how many layers/channels | Hospitality

I was wondering how many channels you can actually work with on the x32.
I do not understand the benefit of so much connectivity (2 times aes 50 , so 2*48= 96channels) if you can only access 2 layers of 16 channels.

I sincerely hope i missed something ...

Looking forward to get my hands on this.

0 1,758

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

4 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi jåån,

Thanks for your question! I'm going to forward it to our tech team, and try to get a response within 24-48 hours.

Take care,

James. []
- July 16, 2012
ChristianBoche Hi jaan,

the X32 has also eight Aux inputs, these can be adressed with AES50 inputs too. In addition you could connect two or three bands at once with an 96 channel setup and save lot of time during the change over. All instruments and all monitor sends, InEars are already connceted. You just have to dail in the right mix scene and you are up and running in no time

Christian []
- July 16, 2012
BrendonVitiello what about assigning the AES50 to the FX returns is that possible? []
- August 21, 2012
PerSovik brendonvitiello wrote:

> what about assigning the AES50 to the FX returns is that possible?

Allthough the return signals are present on the DSP Patch, it doesn't look like you can assign them directly to the AES50 because they are not on the list, this might however be a small oversight that they should easily be able to rectify.

What you can do now if you don't need the P16, is to assign the returns to P16 channels and assign P16 channels to AES50. []
- August 21, 2012

InactiveUser

Contributor - Level 2

2012-07-15

Latest view of ship dates? | Hospitality

The title says it all - I've pre-ordered an X32, I live in Canada, and I'm wondering when I can expect to see it? Also, I could really use the manual to start configuring it's environment. Is there a downloadable version available yet? Last question for this post - I need to build a cabinet to house the unit and I could use the detailed physical dimensions. Is this information available anywhere?

0 5,222

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

26 Replies
Oldest
Newest

Oldest

Liked

Replied
InactiveUser Hi Charlie,

Thanks for visiting our forum and asking questions.

We may not be able to answer all of your questions right now, but I am going to check tomorrow to see what information I can find. Myself or someone else will post a follow up reply by end of day Monday.

Thanks!

-Mike []
- July 15, 2012
JamesBurns Hi Charlie!

The X32 is currently shipping, what time you will receive you unit will depend on roughly when you've placed your pre-order. I would recommend contacting your dealer to see if they're expecting a shipment soon. Please keep in mind that we have received an unprecedented number of pre-orders.

We don't have the full manual up as of yet. But we will make a big announcement once it is. I will check in with our team and see if we have a timeframe for that, and hopefully have a response for with within 48 hours. If you haven't checked it out yet, we do have a QuickStart Guide at the X32 product page. It isn't as in-depth as the full manual, but still has loads of good information.

The QSG states the physical dimensions of the X32 as 35.4 x 20.8 x 7.9" / 900 x 528 x 200 mm and the weight is approx. 45 pounds.

Hope this helps!

best,

James. []
- July 16, 2012
InactiveUser Hi Charlie,

There will be a number of aftermarket cases available - R & R, Road Ready, Gator, and even Behringer.

Product is on its way all over the world as we speak. The stay close to your local retailer and our CARE Department for more info.

Thanks

Jonathan []
- July 16, 2012
GaryPhillips Hey Jonathan -

At your suggestion I contacted Gator earlier this week, and after several iterations of emailed "blank stares" the word was that Gator will not have a case for the X32 for at least 3 months. Hopefully a more astute vendor will respond better to a great opportunity.

gp []
- July 18, 2012
NickDavis Thomman have cases [] Thomman have cases
- July 18, 2012
View later comments

InactiveUser

Contributor - Level 2

2012-07-15

Line array systems | Hospitality

Hi there
I'm wondering about your new line array speakers and has any thought been given to which are the best matching power amplifiers for the various boxes?

0 5,873

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

14 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi Paul, thanks for joining the forum. I currently don't have all the specs available, but I'll check in on this, and hopefully follow up with you when I return to the office on Monday. Take care! []
- July 15, 2012
JamesBurns Hi Paul,

Was there any particular configuration of Line Array speakers that you were interested in? The specs suggest that the NU6000 would be an ideal choice to power two ELX215S speakers, while the NU3000 would be well suited to power a pair of ELX212S speakers. There are a lot of options with regards to whether you want the ELX42 or ELX82 speakers on top, and how many of each you want. Each configuration will have unique power needs.

Best,

James. []
- July 17, 2012
InactiveUser Hello @ Behringer,

When will the Line array be available?

Best regards, Henk []
- July 19, 2012
JamesBurns Hello Henk!

Welcome to the forum, and thank you for the question. As of right now, the ELX series is scheduled to start shipping at the end of Summer.

best,

James. []
- July 19, 2012
InactiveUser

James Burns wrote:

Hello Henk!

Welcome to the forum, and thank you for the question. As of right now, the ELX series is scheduled to start shipping at the end of Summer.

best,

James.

Thnx James, great to hear !

Best regards, Henk []
- July 20, 2012
View later comments

InactiveUser

Contributor - Level 2

2012-07-14

XENYX X1204USB | Hospitality

Hello,

We have recently bought this mixer and we use it to record on the PC though the USB port.

Unfortunately we have noticed a 100ms delay from the moment we play a sound until it actually gets recorded.

Is this a known issue of the machine? Is it related to the drivers or other software maybe?

Thanks
Akis

0 2,832

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

3 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi Akis, Welcome to the forum!

The latency could be caused by a few things, including drivers and/or software. I would recommend you get in touch with Tech Support via [email protected] or by dialing 1-425-672-0816 (M-F until 5:30pm PST) so we can get you more personalized support. Take care! []
- July 15, 2012
InactiveUser James,

Just received my XENYX x1204USB yesterday and began testing a setup on my secondary desktop running Windows Vista 32. Using Adobe Audition 3.0.1 and just started using Adobe CS5.5 as my recording software. I'm setting up a small studio for Voice Over Work. Several questions:

1. Could you suggest a Hook-Up for Voice-Over recording/playback/monitoring that would closely mirror a setup in the manual? Page 8 of the manual looks close. I'm attempting to use an older pair of passive speakers/monitors with a receiver/amplifier as my studio monitors.

2. In my first effort at a PC-Hook-Up yesterday, I was successful at gaining 'Lift-Off' with the x1204USB after installing the USB Audio Driver/32, attaching my MIC, Headphones. I recorded using Adobe Audition 3.0.1 first, and then CS5.5. I've been using MICPORTPRO (USB, Phantom Power 48v, and Phones) and have been experiencing significant playback crackling and skipping issues! I've done all suggested troubleshooting issues imaginable (USB Port Changes, Internet & Anti-Virus disabling, Audio Card Disabling). I had hoped that setting up the 1204USB would provide me a much better Recording/Playback Foundation with Audition, but I'm still experiencing the crackling and skipping in playback!! Have you had any other users describe these problems with Audition? I either have a MIC issue or Software Issue. I just can't be sure!

Thanks for any suggestions []
- July 19, 2012
InactiveUser That makes two of us. I have watched TONS of videos, but when writing all these people, none of them have had success with USB recording, and they all are recording off main out adapted from XLR to 3.5 mm, or using RCA connections on tape out to 3.5 MM. []
- July 23, 2012

TrevWilkins

Contributor - Level 2

2012-07-14

Buss structure | Hospitality

I've read a lot about the X32 and it seems that it can do something that most digital mixers can't (I hope so). I've used many digital mixers for live shows but they don't allow you to group channels to a buss and compress the buss. This is especially useful when running monitors from FOH as compressing the channel also affects the aux send. The usual workaround is to copy channels and use separate FOH and monitor channels but that's just using up channels for no good reason.
It may be possible on other mixers but no house engineer has ever been able to demonstrate this. It's very easy on an analogue mixer.

I'd like to group several channels (e.g. vocals) send their outputs to a stereo group, compress the group and be able to control its output from a DCA or group fader.

Can the X32 compress busses in this way?

0 2,292

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

6 Replies
Oldest
Newest

Oldest

Liked

Replied
InactiveUser Hi Funrocker,

Thanks for visiting our forums. We really appreciate it when people take the time to ask questions about our products and we try our best to always provide timely accurate answers.

When i get into the office Monday morning, I'll find a member of the BEHRINGER team that can answer your question. Expect a response from myself or someone else by end of the day Monday.

Thanks!

-Mike37615.png 37540.png 37614.png 37539.png 37538.png 37536.png 37609.png []
- July 15, 2012
ChristianBoche Hi Funrocker,

yes, you can do that! You can build DCAs and audio subgroups on the X32. F.e. send all your vocal channels to a dedicated subgroub and compress them there. You can ride the volume of all channels at once with the associated subgroup fader.

Christian []
- July 15, 2012
TrevWilkins Sounds good, can you assign the subgroup to a DCA? []
- July 16, 2012
ChristianBoche

Funrocker wrote:

Sounds good, can you assign the subgroup to a DCA?

Yes []
- July 19, 2012
PerSovik navtecki wrote:

> I have build a drum-group by press-and-hold gruop 1 select and press select

> from the drum-channels. Now I want to add to the drum-group a compressor.

> How can I do that? By pressing select of this Group no menu

> is available.

You can't process a VCA group, a VCA is just a volume control that works on several signals at the same time. To do group processing, you need to assign your drums channels to a mixbus.

Assuming you want Mixbus 1 and 2 to be your stereo drum group, first you configure the mixbuses:

Select Mixbus 1 - select Link and LR in the home screen .

Select the first drum channel - select Sends - select Sub Group in the Pre-post field for the linked1-2 sends - select main and turn off the output to mains.

( The fader indication for the two buses will go blank, there is no sends on faders from the channel to that group now, the send is now on the channel's main fader and pan. No signal will go from the channel straight to main.)

Repeat for all drum channels.

Now you can select Mixbus 1 again, there you have got the dyn and eq for the mixbus to serve your basic compression and overall eq needs. ( select Config and add your insert if you want one ) []
- August 21, 2012
View later comments

InactiveUser

Contributor - Level 2

2012-07-13

DJX750 beat counter, it really works???? | Hospitality

i just bought this mixer, and now when testing it, i found that the beat counter doesnt really work, one the reasons i bought it. i think this doesnt have any science to do it, but just asking, is there a way to set this to work properly, or this is just a useless feature?

0 2,028

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

2 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi Djing, welcome to the forum!

When I return to he office on Monday, I can check in with our Tech Support team to see if they know of this issue. Take care! []
- July 15, 2012
CraigReeves Like any beat counter in software or hardware, if the beat is regular there is a good chance it will work fine. If the beat is heavily syncopated or breaks from regular time, then it will have a harder time displaying an accurate BPM. This kind of behavior is consistent across even higher end software that does a special analysis pass on the audio (like in Traktor).

Specifically for the DJX, if you're having a problem with wildly varying BPMs, use the SYNC LOCK button to limit the BPM range for that deck. You can also tap the BEAT ASSIST button to manually calculate a BPM. []
- July 17, 2012

InactiveUser

Contributor - Level 2

2012-07-13

wish list | Hospitality

Not sure where to list this but I being a club dj and mobile dj would like to see a wireless mixer and powered speaker combo. I use another company's wireless set now works fine but it would be nice if it was incorporated into the speaker and mixer. Another idea is small 10" or 12" battery powered speakers. I have occasions where I have a gig on the beach away from a power source and instead of using generators it would great to have a speaker that is rechargeable and last for 3-4 hours

0 1,792

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

3 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi djswampy,

Welcome to the forum! We appreciate your feedback.

best,

James. []
- July 16, 2012
InactiveUser If the power need is not too great, you could probably use an inverter with a deep cell battery. For audio applications you would need a "true sine wave" inverter. You should never "modified square wave" inverters with audio gear. []
- July 16, 2012
InactiveUser I also don't know where to post this, but it is a wish list item.

Now that Behringer is producing drum kits, maybe you could think about producing synthesizers too (it's probably already occurred to you, lol).

What I would love to see is a licensed ARP Odyssey Clone with digital controls but a full analog signal path. That me be a little expensive for your demographic.

So:

How about keyboard controller / iPad interface with a virtual ARP Odyssey operated by the retina display. That way you could offer a few different virtual synths, all using the same hardware.

Just some ideas. I hope to see a Behringer synth soon. []
- July 16, 2012

InactiveUser

Contributor - Level 2

2012-07-13

Record Guitar Xenyx X1204USB | Hospitality

Hi there,

I'm a newby. I set up my Xenyx yesterday. However i can't record any input on my computer.
The audio drivers are all working and selected. I hear sound through USB when I play a demo sing. But: If i plug in my guitar i can't get any signal through the USB to the computer. How do i have to connect my guitar (or other instrument). Do i have to selct buttons on the X1204USB? The manual is very short on this.

0 2,761

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

2 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi Tonse! Welcome to the forum.

It sounds like you should get in touch with Tech Support. []
- July 13, 2012
InactiveUser Well the problem here is that guitars require amplification. The xenyx x1204 is not capable of amplifying. Connect the guitar to a guitar amp and them connect the amp to the soundboard and that should solve your problem. []
- July 14, 2012

InactiveUser

Contributor - Level 2

2012-07-12

XENYX QX1204USB | Hospitality

Hello!

Any release date of XENYX QX1204USB soon?

0 2,856

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

6 Replies
Oldest
Newest

Oldest

Liked

Replied
JamesBurns Hi Kjetll! Welcome to the forum.

No exact date on the QX series mixers as of yet. We've been projecting shipment either late Q3/early Q4 of this year. []
- July 13, 2012
InactiveUser any update on this James? Any info re: a UK release for QX1204USB ?

Sent an email to pre-sales - but have received no response so far.

Do you have any contacts in Europe/UK who might know.

Thanks

P... []
- September 26, 2012
InactiveUser Oh what a surprise!!

Answer from:

MUSIC Group Research UK Limited

CARE Warranty EMEA

"To be able to know when the Xenyx QX1204USB will be lauched, you will have to go and check on the website sometimes, I am sorry but I cannot help you more with that."

Can't wait too long - will have to get another brand then! []
- October 16, 2012
InactiveUser Ho! Ho! Ho!

its coming up to Xmas & still no show Xenyx QX1204USB..

shame about any lack of pre-sales contact or information

Need to get gear soon, can't wait till New Year.. Too late

Another potential Behringer customer...... LOST []
- November 6, 2012
JamesBurns Hi Preset!

The QX1204USB is currently shipping from our factory. It should be available within stores within 6-8 weeks. We apologize for the delays. []
- November 6, 2012
View later comments

JamesBurns

Contributor - Level 2

2012-07-12

How many channels? | Hospitality

How many channels do all of you have on your boards? Are you using all of them, or just one or two?37237.jpg

0 1,577

Facebook More 0

Mark As Solved 0 Reopen Discussion 0

3 Replies
Oldest
Newest

Oldest

Liked

Replied
InactiveUser Hi

I have XENYX 502and use ALL []
- July 12, 2012
InactiveUser I am using 24 channels per mixer together in one concert []
- July 12, 2012
InactiveUser I have a pmp5000 20 channel board. I use 16 of them. Love the board. []
- July 13, 2012

Statistics

Sort

Sort

Discover

Newsletter

Our Brands

Our Products and Solutions

Support

About Us

Careers

Create

Visit our brands website

How to Create a Care Ticket

Statistics

Sort

Sort

Discover

Newsletter

Thank you! Your webinar registration is complete

Thanks for attending our Webinar.