Statistics

285,449 members
167,423 posts
  • New
    JulesC
    Newcomer - Level 1
    2021-05-05

    Hi, first of all please excuse my total ignorance on this subject, but I have a VMX 300 USB, which my husband installed, linked into a small box labelled S.M.S.L (he passed away 5 years ago and the sound system has been in constant use daily), it appears that the speakers feed into the box which then supplies a CGV television controller plus the amp .. all that this small box appears to control is the sound level ... this small box has stopped working, it alluminated as usual this morning, but at some point when I was not in the room it must have failed (or possibly a problem with the transformer?).

    Would I be safe in assuming that I could bypass this box and connect the speakers directly into the amp? I don't want to matters wose!?

    thanks for any advice anyone can give me,

    Jules

    read more...
    0 51
    • JulesC
      JulesC ps I'm so stupid .. apparently the VMX 300 USB is just the mixer, any advice on what I should replace the amp with?
      • May 5, 2021
    • JulesC
      Nigel67 Hi JulesC. I am not sure that we are going to be able to help you but can you send a picture of the S.M.S.L device and does it have another name (model number) on it. I think you will probably have to go to a hi-fi store for their help, but I will try and help you further to see if we manufacture anything similar. S.M.S.L is not manufactured by us but a Chinese Company from searching the internet. You may be able to purchase a direct replacement from them https://www.smsl-audio.com/#firstPage
      • May 9, 2021
  • New
    rghoogas
    Newcomer - Level 2
    2021-05-01

    Where to start please help.

    0 274
    • rghoogas
    • rghoogas
      rghoogas

      • May 2, 2021
    • rghoogas
      rghoogas

      Hello Kyle, thanks for the reply. I am trying to output that to my aux-out, with removing one input. The setup is, to be clear for you, this is for zoom setup, I am capturing audio/video from a room and inserting to a laptop to be part of the zoom video/audio and another laptop has zoom that I am grabbing the audio and bringing to my control room audio mixer. In the same time the mixer already has the mic in and the zoom in, so this out put should have only zoom audio and no mic.

      • May 2, 2021
  • New
    UncleJames91
    Newcomer - Level 1
    2021-04-24

    hello, the electronics of my Tannoy precision 8D is totaly broken an i want to install a passive crossover. Could someone educate me on the value of the compoments to build this filter ?

    Thank you in advance

    Jacques

    0 78
  • New
    Hugobr
    Newcomer - Level 1
    2021-04-04

    Hi I want to connect an old analog record deck to my bluetooth speakers (i know that this is an offensive idea to purists). The record deck has a DIN output and I guess I will need to get a bluetooth transmitter capable of pairing with the speakers. But what is the best sort of amp/prepamp that IO should get to sit in-between.

    read more...
    0 68
    • Hugobr
      Nigel67 Hi Hugobr. This all depends on your bluetooth device, whether it has analogue or digital inputs or may even have a pre-amp built into it. Cost is also another factor, how much do you want to spend. Behringer makes a pre-amp but you will have to make an adapter cable from you DIN plug to phono. I think that you will find it very unlikely to find a pre-amp or bluetooth device that has a DIN plug on it. The Behringer pre-amp is the PP400 https://www.behringer.com/behringer/product?modelCode=P0492.
      • April 4, 2021
  • New
    Alpha1916
    Newcomer - Level 2
    2021-01-06

    I loaded XAir to my new MacBook Air M1, apple will not open it. "M18-edit can't be opened because apple cannot check it for malicious software." So I sent a message to contacts in music tribe, and they sent me an FAQ for catalina having this issue. This is not working for me with Big Sur? Any thoughts or ideas? I know many things with this new M1 silicone processor do not work like it did with the intel processor. I am also new to Apple, so as detailed as you could be please. Apple is like learning a new language right now for me. 

    read more...
    0 131
    • Alpha1916
      john0121 Hi Ryan, think it was me who sent you the article referring to Catalina but the same should apply. If you go into the security settings in system preferences you should be able to allow the program to open. If not could you reply to my email with a screen shot of the security page from system preferences so I can see the settings you have. Thanks
      • January 6, 2021
  • New
    Ed49
    Newcomer - Level 1
    2020-12-28

    Hope all y'all are safe and healthy

     

    From an auiophile in New York City

    in 1967 bought two(2) used - and wonderful

    Tannoy Speakers

    about 35"H x 14"D x 24"W

     

    I hope someone could please help - thank you

    How do I find:

    * The Model #

    * Model Name

    * Serial #

    * Year Manufactured 

    * How many were manufactured

    * Performance Specifications

    Is there anything which needs to be done

         after ten(10)-years of storage

         to ensure everything is perfect ?

     

    Thanks very much

    Ed Staley

     

    Please email me:

    [email protected]

     

    678.444.9896<-Direct Cell

    Thanking everyone for your most kind helping hand

     

     

     

     


    View Attachment

    read more...
    0 53
  • New
    mickange
    Newcomer - Level 1
    2020-12-11

    Hi can someone help me. I've purchased a behringer umc22 and a tonor tw820 wireless mic system to do karaoke using YouTube karaoke songs. I've set both devices as per instructions but I'm not getting any sound from the mic. My Mac recognises the umc22 and lights flash when I speak into the mic but I can't hear my voice. Am I doing something wrong. Any help is much appreciated 

    thanks

    read more...
    0 147
    • mickange
      Nigel67 Hi Michael, If you press the Direct Monitor button, can you hear the microphone through your headphones? We need to confirm that your MAC can definitely see the UMC22. Can you do the following;
      To check that your MAC is seeing your device connected to it via a USB connector, the following procedure will help.

      Plug your unit in to the MAC, and power both on
      Press the CMD + Spacebar at the same time to open a search bar.
      In the search bar, type 'system information' and select this option when it appears in the search.
      A new page will open and in the column down left hand side select 'USB'
      The right hand side of the page will now show all the USB connections the MAC has.
      If the MAC can see the unit that you have connected, it will be listed in the right hand side of the page under one of the USB connections.
      If your unit is listed, then the problem will more than likely be an incorrect setting in the software you are connecting to.
      If the unit is not listed, then check all connections, power and cables and if possible try another computer.

      Are you using the original USB cable. What DAW are you using? Can you confirm that for recording and playback, you have the UMC22 selected? What OS is the MAC running. Do you have another computer that you can try?
      • December 13, 2020
      • Umc22 Mac set up
        mickange Hi Nigel thank you for your response. I have since opened GarageBand on my Mac and can get sound through that. I had no idea I needed software to hear the mic. I assumed I could open YouTube on safari and just sing to the songs. GarageBand is difficult to understand for a novice like me. Can you suggest an easier way to get my mic to run with YouTube. Thanks for your time Nigel.
        Mick
        • December 14, 2020
      • Umc22 Mac set up
        Nigel67 Hi Michael. I am sorry, but I have never made a You Tube video so am not really in a position to be able to give you any advice. There are plenty of videos on You Tube showing you what software you would need. You could try Audacity, which is probably easier than Garageband and it is also a free software.
        • December 15, 2020
  • New
    richdon
    Newcomer - Level 1
    2020-11-05

    Hi all. I am new here and am in no way a musician. I am rather a music and movie enthusiast. I purchased a Behringer FBQ1000 at the begining of 2020. I have hust unpacked it this week and was thinking of using it as a parametric equaliser to equalize the subwoofer in my home theater that I drive with the EP2500 in bridge mode. I have read all I can, the user manual and a few other white papers, watched a few videos on YouTube although the one I was intersted in was in a language I could not understand, Polish I think. For the life of me, I can't get any frequencies to stick. Here is what I have tried so far: Factory reset- Filter Mode=PA Filter select= I have tried #4 & #5. Filter select 1, choose a frequency Ex: 25Hz Bandwidt and gain and then hit store once. The display flashes for the chosen filter select (4 or 5). When it stops, I go to filter 2, and repeat the same operation for the 6 filter bands I need. But when I shut off and turn on again, it shows the chosen channel in the display (4 or 5) but all the red leds are flashing like no filters have been applied. Then it seems to be counting and some of the leds turn solid red all the way to the last filter. This takes around 30 minutes to complete I am using REW software to figure out the filters I need. What am I doing wrong?
    Don

    read more...
    0 77
  • LilianaRoberson
    Newcomer - Level 1
    2020-10-22

    Hi,

    I have two behringer nx 6000 they went into protection mode I hit the reset button but its still in protection what do I need to do.

    https://19216801.red/ https://routerlogin.life/ https://192168101.win/

    Thanks!

    read more...
    0 141
    • LilianaRoberson
      KyleJohnson Hi Liliana, Kyle here with Music Tribe. Unfortunately it sounds like the amplifiers will need to be repaired. Please contact us by clicking on the Support button at the top of the page. After clicking support, scroll down and select the Service option to submit a ticket.
      • October 22, 2020
  • Sarindeep
    Newcomer - Level 1
    2020-10-19

    hi I just need my amp serviced I've really enjoyed the product and wanna fix it.

    0 73
Go to page