Statistics

261,466 members
140,194 posts
  • TheCroMan
    Contributor - Level 1
    2019-10-30

    Hello Community:

    I've been able to connect my XR18 via the Access Point and Wireless to my computer, my ipad, and Android. I was also able to connect to my PC running Windows 10 via the Ethernet port. 

    Unfortunately [and this is why I am writing] I have not been able to connect to my Linux PC (Ubuntu 19.04) via the Ethernet. I have been able to connect to my Linux PC with the Access point, and via wifi. 

    Any help would be greatly appreciated! I don't want to bring two computers to each show.

    Thanks,

    J

    read more...
    0 119
    • TheCroMan
      KenMitchell

      Hi J ( @TheCroMan ), 


       


      Welcome to the community.  When you say connect, do you mean the XAir Edit app or networking in general?  Do you get an IP address from the XR18 and can you ping it from the Linux PC? I'm assuming you have the XR18 configured as the DHCP server or are you running with static IPs? 


       


      We need to verify the basics are working first and go from there. 


      Ken 

      • October 30, 2019
  • obiwan
    Contributor - Level 1
    2019-10-29

    Would buy the tannoy xt8f but the dealer said it is discontinued. What are the new modell?

    0 139
  • JCORPUS
    Contributor - Level 1
    2019-10-28

    Hi, recently I´ve tried to connect my MS40 monitors to a Smart TV via the optical line and the problem is that it only sounds the right speaker, sounds very well but only de right. The left one it seems to vibrate a little but it doesn´t make any sound. The TV output is set in PCM mode.

    I don´t have any problems with the rca connectios. They sounds really good.

    Thank you very much and sorry for my poor english.

    read more...
    0 93
  • Jankie
    Contributor - Level 1
    2019-10-25

    Hi everyone, I write from Italy and I'm not very good with English, in fact I'm using the Google translator. I'm a non-professional bass player, but I write as a user of the Ultracurve Pro DEQ 2496 in my stereo system. It changed my life, I listened in a much better way than before and I even bought two of them within three weeks. I hope it continues to exist for a long time, because it is addictive and now I can't do without it.

    read more...
    0 138
  • BorisSiomin
    Contributor - Level 3
    2019-10-21

    I am looking for a Bluetooth speaker for home use, I did not purchase before that's why i have no idea about BT Speaker. My budget is not more, highly i can spend 100 bucks for a speaker but need well build recommendation. Please if anyone any experience please share your opinion.

    Thanks.

    read more...
    0 139
  • dlgabry
    Contributor - Level 1
    2019-10-19

    I have the umc204hd playback ports 1 & 2 wired to a fostex sub woofer with its passthru outputs connected to two mackie mr 524 speakers. I'm using Hauptwerk to supply the audio to the umc204hd. I  have the latest version umc204hd asio driver, with it's output set to the max. The audio volume is lower than expected even with the speaker's volume controls set to the max. Any suggestions are most welcome!

    I've submitted two tech support requests for the umc204, both were closed with no apparent update from support that I can find...

    read more...
    0 274
    • dlgabry
      KenMitchell

      Hi David ( @dlgabry ), 


       


      Welcome to the community.  I've seen a few posts about the RCA level being lower than expected our of the PB outputs.  I have a 404HD which also has balanced PB outputs and I've always used those.  I think it depends on the input sensitivity of the amp. In situations like this I usually put a stereo line pre-amp in between the output device and the input of the amp.  Something like this should work fine: https://www.amazon.com/STEREO-LINE-PRE-AMPLIFIER-15DB-12VDC/dp/B00I01ZNUS.


       


      Hope this helps, 


      Ken


       

      • October 19, 2019
  • rgs84
    Contributor - Level 1
    2019-10-08

    Hi,

    Someone to tell me what is internal wiring of DC-8?

    I think to bi-wire them (2 runs per speaker), but dont know what gauge and cable type to looking for.

    The amp is Marantz PM11S3.

    Thank you,

    0 253
    • rgs84
      GrahamH

      Hi, Use a thick multistrand cable for the LF and a good quality solid core for the HF to yield the best results. The amplifier sends exactly the same signal through single or bi-wired cables. The difference comes in the separation of frequencies at the speaker end of the cable. The internal components (crossover) of a speaker sends the high frequencies and low frequencies to the correct drivers/tweeter. Even though the difference is minimal, many audiophiles claim this bi-wiring method increases the stereo separation and perceived level of detail.

      • October 25, 2019
  • rmayer121
    Contributor - Level 2
    2019-09-25

    I have a Behringer 204 that I am utilizing with my iMac. I'm trying to get 4 channels to play utilzing the audio outputs but cannot find the correct software. Does anyone have a recommendation of software that has this capabilities? 

    0 440
    • rmayer121
      KenMitchell

      Hi Ryan ( @rmayer121 ), 


       


      Welcome to the community.  There are many applications that support multi-channel audio.  It would probably help if you explained a bit more about what you need or what you are trying to accomplish. 


       


      Ken


       

      • September 25, 2019
    • rmayer121
      rmayer121

      I have 4 audio animatronic controller boards that are activated when sound is ran through them. I would like to be able to utilze my Behringer 204HD for this and export the audio to 4 separate channels. I've created the tracks with Audacity, but it only has the capability of exporting 2 channels. Just need specific software that has the ability to edit tracks and export into 4 channels. Does this make more sense? Thanks for the help.

      • September 25, 2019
    • rmayer121
      KenMitchell

      @rmayer121 


       


      Hi Ryan, 


       


      Just about any DAW (digital audio workstation) software will do what you want.  One that's popular around here is Reaper which comes with a 60 free trial and is only $60 to purchase after that.  If you want something that is free take a look at Tracktion T7.


       


      BTW, sounds like a fun project.  Is this for a theatre production or for a Halloween setup or something else? 


       


      Hope this helps, 


      Ken

      • September 25, 2019
    • rmayer121
      rmayer121

      I will definitely check out Reaper for the free trial and then if it works, I can decide if I want to spend $60. I think I tried downloading Tracktion last year and ran into issues so I gave up on it. 


      This is for my Halloween setup I have at my house (https://www.youtube.com/watch?v=p6czEVZX-wU). RIght now I have 2 characters running off my computer and then have a local iPod I have to turn on for others. If this works, it gives me the ability to expand the amount of animated characters I can have. Thanks for your help Ken!

      • September 25, 2019
    • rmayer121
      KenMitchell

      @rmayer121 


       


      Very cool!  Let me know if you need a hand with Reaper.  Tracktion has had stability issues in the past.  I've been using Reaper for about 9 years in a lot of theatrical productions as well as personal projects.   Most of my theatre work these days is in soundscapes and audio special effects.  We use MIDI and OSC messages, as well as Ethernet UDP packets to trigger sound effects based on various electro-mechanical events. 


       


      I noticed a Washington license plate and of U of W helmet in one of your videos.  I'm in California, so same TZ. 


       


      Ken

      • September 25, 2019
  • TubeGod
    Contributor - Level 1
    2019-08-22

    Hello!
    I'm interested in using Lake Processing LM-44 for my home audio stereo setup that required one crossover point at 200hz (high pass @12db and low pass @24db)

    I have few questions.

    First, does the LM-44 have built in volume control for attenuation?? Since the LM-44 has 2 pairs of analogue XLR outputs, can I assign one single AES digital input connected to the Music Server and set the crossover at 200hz with one pair of analogue output for above 200hz and the other for under 200hz??

    Thanks!

     

    read more...
    0 173
  • DblMoonChild
    Contributor - Level 1
    2019-08-20

    Hey all! New to this, please be patient. 

    I Just purchased a pre-owned VLTouch2. When I received it all of the presets have been erased and I’m wondering if there is a way to restore these? Are they downloadable once I have the unit up to my computer for updates? Any tips or tricks would be appreciated I am new to this piece of wonderfulness and my hands

    read more...
    0 370
    • DblMoonChild
      TCH-Spencer

      Hey @DblMoonChild,
      Welcome to the fold!  You can use our free VoiceSupport 2 software to update your Touch 2, manage presets, and download new presets from our Cloud library.  To restore factory presets, all you need to do is use VoiceSupport to "delete" whichever preset(s) you're trying to restore, and the factory presets will repopulate themselves.  That is to say, the first 200 preset slots can never be empty, they either contain their respective factory preset, or they can be overwritten with user presets, and deleting those edited user presets will restore the slot back to its factory preset.  Experiment lots, store your own edited presets, and also check out the additional presets you can download from VoiceSupport.  Cheers!

      • August 22, 2019
Go to page