Statistics

254,794 members
132,525 posts
  • New
    smburzynski
    Newcomer - Level 1
    2021-08-22
    Hi Behringer,

    I am looking for a parallel loop mixer and am wondering if you could be of assistance to put something like this together.
     
    The unit should fit into a 1U 19” Rack enclosure.
     
    There should be 8 loops onboard each with send and return level, phase invert switch and switchable muff pi style tone stack.
     
    It should have master input and output level adjust.
     
    Loop 8 and 7 should have Feedback control, and should be routable in series or parallel. 8 in 7 / 7 in 8 or parallel.
     
    Switching of the 8 Loops should be possible by front panel push/push switches and on status should be displayed by a corresponding LED.
     
    Additionally Midi in out thru sockets should be provided at the back on the unit, facilitating Midi switching of the loops via PGM Changes.
     
    0 to 127 User presets containing all 8 loop switch and tone status should be stored in non volatile memory and programmed by a simple to use midi learn push/push switch on the front panel.
     
    A Program Number display would be an advantage but not neccessary.
     
    A 240V switched solid state power supply should be onboard as well.
     
    A bonus would be a break out floor board with the 8 loops, bypass and midi learn switches onboard connected with a single mono ¼” Jack lead.
     
    Now why, you might ask?
     
    I have been looking for something like this for years. I have various vintage 19” effect units I would like to revive. And unfortunately they are all more or less designed to be used as effects on a mixing board feeding back through a return channel.
     
    Essentially this is what I am trying to achieve but for just 1 guitar signal and up to 8 FX sends and returns.
     
    Currently there is only The EHX Tri Mix and the Wounded Paw Blender V4 which come close to what I am looking for but they are both landmines that integrate badly into a rack environment.
     
    Personally, I have three 19” Tube Preamps, two vintage compressors and three Multi FX units that I would like to setup like that in my studio as well as being able to take them on the road.
     
    If you can hear me I really would like to hear from you too.
     
    Kind regards
    read more...
    0 20
    • smburzynski
      Nigel67 Hi Sascha. Many thanks for your product request. I will put in a new product customer request form to the R&D Team for discussion. All the best.
      • Aug 24
    • smburzynski
      smburzynski

      Thank you Nigel...

      • Aug 24
  • New
    WullieMcdonald
    Newcomer - Level 1
    2021-08-22

    HEY GUYS, NOT GETTING ANY JOY WHEN TRYING TO BEAM DIFFERENT TONEPRINTS TO MY AMP. TRIED A FIRMWARE UPDATE FOR THE AMP, BUT THERE HASN'T BEEN ONE SINCE 2017. TRIED UNINSTALLING THE TONEPRINT APP AND REINSTALLING IT BUT NO JOY. BEAM SOUNDS NORMAL BUT NO LIGHTS FLICKER AND TONEPRINT DOES NOT CHANGE. CHANGED BATTERIES IN THE BASS, STILL NOTHING. CAN ANYONE HELP???

    read more...
    0 26
    • WullieMcdonald
      ChrisEdwards1 Hi WullieMcdonald, I can see you have also submitted a Technical support case for your query. Please note a response was sent earlier today via your case, if it is not within your main inbox could you please keep an eye on your spam/junk folder as we have seen our responses route to these locations also.
      • Aug 22
  • New
    Jsanders72
    Newcomer - Level 1
    2021-08-21

    Greetings all, I have an issue. I have been using a G System in front of 2 clean amps in stereo for over a year. Incredible unit, kicking drive pedals in and out, flawless, incredible sound. I have just purchased a JVM205H head and wanted to use the full MIDI implementation and the effects loop on the head with the G System, I'm getting MIDI controller changes to the head, it will insert pedals when I want, but none of the modulation effects, delays, reverbs or anything else is making it to the head. I'm using the 4CM in the loop, I've tried the series and parallel both and nothing. It sounds terrible going straight into the input so any help will be greatly appreciated. TIA

    read more...
    0 23
  • New
    GarethThomas
    Newcomer - Level 1
    2021-08-19

    I've just purchased a Ditto x4 and it's freezing after around 30 seconds every time I switch it on. All the switches stop working and the lights just stay in whatever mode they were before it froze. 

    I've tried updating the firmware and I checked to make sure the SD card is in position. Absolutely no idea what's wrong with it. Incredibly frustrating. I've not been able to hear anything the pedal does yet. 

    read more...
    0 28
    • GarethThomas
      Nigel67 Hi GarethThomas. I am sorry to hear that you are experiencing issues with your newly purchased unit. Have you tried factory resetting the unit. Hold down the Loop 1 switch for 13 seconds, the Loop switch LED will blink orange (once) and red (once) when the reset is complete. If the unit is within 30 days of purchase, please contact the shop that you purchased it from and ask for a DOA replacement. If it is over 30 days old then we can get the unit repaired. Please submit a Service ticket. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Service tab and submit a ticket. A colleague will then get back to you with an RMA number and advise the local service centre to you. Many thanks
      • Aug 25
  • New
    RobertKelly
    Contributor - Level 1
    2021-08-17

    Trying to find a way to control volume faders in my X32 Rack using an X Touch Mini. I would prefer to use the USB jack on the X32 but could also go the route of the X32 Edit App. in my MacBook Air or iPad. 
    I'm using the x32 as a live PA system that I control while playing keyboards. A tactile knob would be so much more user friendly when a quick volume adjustment is needed. Any advice here? Thanks!    

    Rob

    read more...
    0 31
  • New
    chasermina
    Newcomer - Level 1
    2021-08-17

    What is an online radio online station? Many people hear the word radio and think it is just a simple transmission coming out of your car stereo or other device that receives an analog signal and converts it into something the radio can play. This is not always the case however. With current technological advancements, online radio services are becoming a way of life for many people.

    For a long time, public broadcasting stations were considered the only places to get quality music and programming. The analog signals were transmitted by a dedicated network, not accessible to anyone. However, over the past few decades online radio has started to become more competitive with public broadcasting. Commercial broadcasting stations must compete with online stations for public space and listener. The result is often inferior music and programs, but the goal is to provide a unique service to their audience.

    read more...
    0 24
  • New
    Craiggleason
    Newcomer - Level 1
    2021-08-17

    I can download but it will not go into Apps.....how else can I make sure my sofware is up to date and what is the latest version for Flow Software right now August 16, 2021?

    0 36
  • New
    TerryHealy
    Newcomer - Level 1
    2021-08-16

    There used to be a place where users posted and shared them???

    0 23
  • New
    SimonSimmoEliot
    Newcomer - Level 1
    2021-08-08

    I own a V-tone GMX 1200H and I am having trouble getting the amp head and FCB1010 on the same channel. I just want them both on on channel 1

    I follow all the steps in the amp and midi controller manual and the Channel number of 1 on amp still keeps flashing and number dose not go solid. It says in the manual it will stop flashing when the amp and foot switch are on the same channel and I have also went through all the steps to set the foot controller to channel 1 and the 1 on the amp does not go solid I just want to use the foot switch to call up effect patches, channel switch and effect on off control and expression pedals I basically want to use it as an effect controller for the

    V TONE on the amp head but I can’t start programming until I get both the amp head and the foot switch on the same channel and the channel number on the amp head goes solid.. plz help I’m finding it hard getting info about GMX V Tone and FCB1010 setup the user manuals are very vague. And any advice how to program the FCB1010 to be pretty much used as a pedal board to switch between FX in the head and channel switch and effect on and off and expression pedals would be great. It mentioned in the GMX V Tone manual the the FCB1010 is a great MIDI controller and channel switch and effect on and off for the FX built into the GMX 1200H V Tone.

    read more...
    0 40
  • New
    DTSwayze
    Newcomer - Level 1
    2021-08-04

    My Ms-1 worked fine two weeks ago and when I plugged up and powered it on yesterday the led for the power barely lights up and no other led light up.


    View Video
    read more...
    0 33
    • DTSwayze
      Nigel67 Hi DTSwayze. It looks like a power supply issue that will require repair. Please submit a ticket to our Service Department and they will help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Service tab and submit a ticket. A colleague will then get back to you with an RMA number and advise the local service centre to you.
      • Aug 4
Go to page