Statistics

305,338 members
189,620 posts
  • New
    mineM
    Newcomer - Level 1
    2022-01-07

    What is the difference between DN32-USB WINDOWS driver and DN32-LIVE USB audio driver?

     

    Which software support connecting M32 consoloe usb port to  PC (windows)?

    I know USB card available console to audiointerface. 

    and I'm useing OBS streaming program. 

    read more...
    0 634
  • New
    PastorMike21
    Newcomer - Level 1
    2021-12-21

    Hey guys, 

     

    Looking to connect my x32 to the Atem mini for livestreaming at church. Would anyone know how to do that? 

    0 7
  • New
    Arlo6514
    Newcomer - Level 1
    2021-12-19

    I am at my wits end.  I have the 1204USB and a MacBook Pro that I am using to record podcasts into Audacity.  I have tried setting up a mix minus for Zoom calls.  The audio from my mic and the Zoom call are registering in the mixer.  However, when I try and record into Audacity only my mic is recording.  I can hear the zoom caller, they can hear me, it is registering on the main mix.  

     

    PLEASE HELP...

     

    My setup is mic in channel 1, mix minus is set through channel 7/8 and have the aux 1 as my out.  

     

    Thanks

    read more...
    0 8
  • New
    ALIASJT
    Newcomer - Level 1
    2021-12-15

    Hello,

    As mentioned in the Subject, I am trying to broadcast music over internet with the help of UMC202HD and BUTT software, which is the software to connect to internet and send the music stream.

    First of all, BUTT detects the following peripherals :

    • PCM by default
    • Microsoft sound mapper - Input [MME]
    • IN 1-2 (BERINGER UMC 202HD 192K) [MME]
    • ASIO4ALL v2 [ASIO]
    • Realtek ASIO [ASIO]
    • UMC ASIO Driver [ASIO]
    • IN 1-2 (BERINGER UMC 202HD 192K) [WINDOWS WASAPI]

    It's very confusing ... What option is to be selected ???

    BTW I tried all options, but none of them worked, that is to say no sound is present on the internet adress where it sould be.

    Can you help ?

     

     

     

    read more...
    0 33
    • ALIASJT
      Nigel67 Hi ALIASJT. You should select 'IN 1-2 (BEHRINGER UMC 202HD 192K) [MME]'. Have you been able to determine whether you are getting audio into the computer? What version of Windows are you using? If you go into Sounds (right click on speaker icon in bottom right hand corner of screen) and click on the Recording tab, you will see the IN 1-2 option for the Behringer UMC202HD. To the right hand side of this is a bargraph. If you send audio from the UMC to the computer (via the USB cable), then the bargraph should light up. If it does, then you probably have a setting issue with your BUTT software. If you do not see signal on the bargraph then you need to check that signal is outputting from the UMC. Also make sure that you are using a USB2 compatible port on your computer (try all of them) and if you are using a USB hub, try plugging directly into the computer as some can cause issues.
      • December 15, 2021
  • New
    Cornerstone
    Newcomer - Level 1
    2021-12-10

    We are using a Behringer X32 Rack and we got a S16. I connected S16 and initiated the X32 and did all the routing. When tried to connect to my PC for live streaming I found the X32 is not being recognised by by PC. I have changed 3 USB cables and tried connecting through all the available USB ports and also reinstalled the driver. Still no response. The red LED near the port is working from the time the X32 is on .

    Can someone help me out. I will have to resolve this issue before Sunday morning.

    Thanks!

     

    read more...
    0 24
  • New
    Nadia40
    Newcomer - Level 1
    2021-11-16
    • Nadia40
      Nigel67 Hi Nadia40. You will require the serial number of the headphones to be able to register them. They will be on a label on the headphones. The serial number begins with a S and ends in 189. Without this, it is not possible to register them. Once you have all the details, please fill in the Product Registration form. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Product Registration tab and submit your registration ticket. Many thanks
      • November 16, 2021
  • New
    RSMilward
    Newcomer - Level 1
    2021-11-15

    I bought a used UMC204HD, so I don't have the original invoice. Is there a way I can register it?

    0 13
    • RSMilward
      Nigel67 Hi RSMilward. You can register the UMC with the invoice for the unit when you purchased it used. Unfortunately though, there is no warranty on your unit as any remaining warranty is not transferrable. You will get a automated e-mail response advising that that the unit is registered and you have a warranty, as the system just goes on the purchase date you enter, however if you tried to make a claim, them the invoice would be physically checked and it would be seen that you were not the original owner. I hope this answers your question. Many thanks
      • November 16, 2021
  • New
    authorloen
    Contributor - Level 3
    2021-11-14

    Hello. I have the latest firmware and drivers for the XR18. Does anyone know how to get the ASIO to work with voice metre.

     

    I mean that would be fantastic because then you can have all the channels and the latency is really low.

     

    I would greatly appreciate it.

     

    Thank you very much. 

    read more...
    0 36
  • New
    tejedor1967
    Newcomer - Level 1
    2021-11-09

    I just find out that there are a new Windows driver for the XR18 with number v5.12.0_2021-06-30.

    The GOOD NEWS are that with that driver your are able to use again USB1-2 USB3-4 USB5-6 and USB 7-8.

    With previous release, the v4.59.0, only the USB1-2 where available so I should keep on using the previous one called v4.38.0 in order to have all the 4 USB drivers in Windows.

    Now, the doubt, I have seen a fifth USB driver called USB1-8 and I did a few testing and I couldn't find out how this works. How this USB1-8 works? And why did you added?

    Thank you in advance and THANK YOU for allowing us to use again 4 USB drivers.

    Javier

    read more...
    0 13
    • tejedor1967
      Nigel67 Hi tejedor1967. USB 1-8 is a multichannel mode for surround in WDM mode. The new driver also now shows all 4 pairs in WDM mode. If you are using ASIO, then it continues to support all channels
      • November 15, 2021
  • New
    aexitus
    Newcomer - Level 1
    2021-10-22

    Hello 
    I recently bought a goxlr mini and it works pretty well, i love it. 
    But from time to time when I hit my desk, it crashes and all sound just dissappears - also the app crashes. Sounds redicilous, i know, I cant help myself. 

    Its not like I hit or kick my desk, its more like putting a cup of coffe on it as normal persons do. Do you have any idea what is wrong with my goxlr or what I can do to prevent it?

    Have a nice day 
    - aexitus

    read more...
    0 34
    • aexitus
      Nigel67 Hi aexitus. The unit should not behave in this manner no matter how much it is vibrated. You mentioned that you recently purchased it. If it is still within 30 days of purchase, then you can contact the shop that you purchased the unit from and ask for a DOA replacement. If over 30 days, please fill in a Service Ticket and a warranty / non warranty repair can be arranged. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Service tab and submit a ticket. A colleague will then get back to you with an RMA number and advise the local service centre to you. Many thanks
      • October 25, 2021
Go to page