Statistics

254,621 members
132,325 posts
  • New
    ZachChill
    Contributor - Level 2
    2021-10-24

    I have an M32 and I'm looking to add a DL32.  I use the M32 for secondary recording I/O to my UFX+.

    I need a total of 32 simultaneous inputs (16 M32 local + 16 DL32) over MADI.  Similarly, I also need a total of 32 simultaneous outputs (16 M32 local + 16 DL32) over MADI.

    I realize that I already could get the inputs with the M32 alone, but it's the outputs where I really need the DDL3 since the M32 only has 16.

    Is this possible to have 16+16 / 16+16 routed and all available over MADI 64ch?

     

    Thank you in advance.

    -Zach

    read more...
    0 4
    • ZachChill
      KyleJohnson Hi Zach, Kyle here with Music Tribe. Yes, the DN32-MADI Card for your M32 supports up to 32 bidirectional channels. You can route any 32 of the inputs/channels from the M32 to the Card Outputs, and route the 32 incoming Card signals to channels or outputs. The one sticking point may be the total channel count on the M32, you can't run 64 channels in the mix. You can route the signals directly from inputs and outputs, but the total number of mixable channels on the M32 is 32 plus the 6 Auxes.
      • 12 hours ago
  • New
    joshdrums
    Newcomer - Level 1
    2021-10-24

    Hi dear music-lovers,

    me and my band are currently using a mr18 for our rehearsals and are very happy with it (easy mixing, monitor setup and recording if wanted...). So yesterday i was chatting with a FOH engineer who is into Behringer tech and we came across the Ultranet feature of the mixers. We had the idea to use the MR18 as a stagebox (for monitor mix only), so the band has the monitor setup in our hands only, and the FOH tech has nothing to do with it. So we would be able to record live shows, if the FOH tech is too lazy or something and could use our presets from the rehearsals as a bese-setting.

    Today i searched for the needed settings, but wasnt able to find an "Ultranet In" option in the Routing menu of the MR18. Also there is nothing to find in the manual and elsewhere. I know that the Ultranet feature of the MR18 is thought to be used with the personal stage monitors P16 or so, and that we are able to simply use the features of the FOH mixer, but i find the idea very interesting for myself...

    In short: FOH mixer(eg. X32) sends available chanels via Ultranet to MR18, MR18 uses Ultranet as input. Is that possible? Are there other possibilities where we as band are flexible and independet in an similar way?

     

    Thanks for your replies or suggestions :)  

    read more...
    0 8
    • joshdrums
      Paul_Vannatto Ultranet on both X32/M32 and X-Air/M-Air consoles are output only. Only the P16 and some Turbosound speakers (eg. iQ10, etc.) have input ports. So what you are wanting to do is not currently possible with the XR18/MR18. An alternative is to upgrade to an X32 Rack.
      • 16 hours ago
    • joshdrums
      joshdrums Thanks for your Reply. I see that this feature is something for the professional productline. But hopefully there is something in the making to bring this to the smaller products. For my understanding this could be added to the Firmware, maybe that someone could switch the port between Input/Output. But maybe the feature is not wanted in the product.
      • 14 hours ago
    • joshdrums
      JemPot I'm brand new here but am in a similar environment (XR18, band, Rehearsal monitors, in ears etc).
      • 13 hours ago
    • joshdrums
      JemPot I thought the app was able to take care of in ear or monitor bus requirements anyway? Or am I off on a tangent?
      • 13 hours ago
  • New
    Midas
    Newcomer - Level 1
    2021-10-20

    HERITAGE-D Series
    bit.ly/Midas-HERITAGE-D-Series

    Live Digital Console Centres, Stage Boxes with Multiple Microphone Preamplifiers and Accessories
    The Midas HERITAGE-D Series Digital Mixers and I/O Interfaces are designed to serve our Tour Sound and Installed Sound Customers.

    From: $37,500

    #Midas #HD9624CCIP #HD9624CCTP #HERITAGEDSeries #Mixers #Digital

    read more...
    1 28
  • New
    Albertvinzenz01
    Newcomer - Level 1
    2021-10-12

     

    Hallo 

    Midas bootet nicht mehr hoch.

    Nach dem Einschalten gibt es eine Schleife. Hochfahren bis zu einem gewissen Punkt

    Dann wieder down - wieder hoch usw... Schleife.

     

    Wer kann helfen ?

     

    Albertvinzenz01

    read more...
    0 15
    • Albertvinzenz01
      KyleJohnson Hello, Kyle here with Music Tribe. It sounds like it could be a failure, please contact us directly by clicking on Support and then Care/Service.
      • Oct 12
  • New
    DeanRinehart
    Newcomer - Level 1
    2021-10-12

    This is a legacy product that's pretty hard to ship around for repairs...when will Midas support right to repair and release schematics?

    0 8
    • DeanRinehart
      Dale_M Thanks for your post this is not currently on offer to users however we do have Midas approved repair centres globally who have access to service information, if you need a non warranty repair please go to the Support tab above and select Service.
      • Oct 13
  • New
    avbarr
    Newcomer - Level 1
    2021-10-11

    Is it possible to order new jelly type buttons and replace old black ones on midas m32?

    I own midas m32 with old buttons (hard to see) and new Midas m32R Live with jelly buttons and I like them more.

    So it would be great if I could replace them..

     

    Thank you!

    read more...
    0 7
    • avbarr
      Nigel67 Hi avbarr. Yes, this shouldn't be a problem. Please contact the spares department and they will be able to advise you part numbers and pricing. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. Many thanks. Just a word of caution, if you are the first owner and purchased the console on or after 1st September 2014, then you have a 10 year warranty which will be voided if you open the console to fit the switch caps. It would have to be done at a local service centre to you to keep the warranty active. If you decide to go this route, then as well as a spares ticket, you will need to send in a Service Ticket so the Team can arrange the warranty service. Many thanks
      • Oct 11
  • New
    chadf9942
    Newcomer - Level 1
    2021-10-08

    I am looking for a pro 6 power supply. 
    one of mine isn't working

     

    0 6
    • chadf9942
      Nigel67 HI chadf9942. Is your Midas PRO6 still under warranty? Its 10 years from 1st Sept 2014 if you are the first owner. If so, please send in a Technical Support ticket and we will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. If the PRO6 is out of warranty, then you can purchase a new power supply through our Spares team.
      Please send in a spares request ticket. This can be done from the same page that the Technical Support ticket can be found, just select the Spare Parts tab instead. Many thanks
      • Oct 9
  • New
    davep54
    Newcomer - Level 1
    2021-10-07

    I just need to know the configuration on the aes50 cabeling and and how to send all my  outputs from the dl32. I so far have no problem getting all the inputs to both consoles but the outputs are a problem.I wanted to ust xlr out 7 and 8 as my m32C foh mix output and 15 and 16 for x32  for foh in another room. Aslo wanted to send buss mixes 1-6 out of dl32 for monitor sends from x32.

    Hope this make sense. This routing system makes no sense to me and I'm not new here.

    I thought the newer firmware would make it easier and for inputs it does but I cant make sense of the output section.

    read more...
    0 22
    • davep54
      Paul_Vannatto Unfortunately your description of your outputs is unclear. Also you didn't provide your interconnectivity mapping (how everything is connected together). For example:
      X32 [B] <-> [A] M32C [B] <-> [A] DL32
      • Oct 7
    • davep54
      davep54 I didn't provide mapping cuz that is what i'm looking for to start. then i need to figure how to get the routing where I need it. so I will explain again. I have an X32 at Foh that will get its inputs from DL32 at the stage. that x32 will provide house l+r and 6 monitor sends to stage where dl 32 is. Then I have an M32C at the stage that will get its inputs from the DL32 also. I need the M32C to send the its l + r outputs out of The DL 32 and the X32 Also to send l +r out plus the 6 monitor sends out of the dl32. The M32C is Basically mixing for a different room but all the outs from both boards ar coming from the dl32. Hope this is more clear.
      • Oct 7
    • davep54
      Paul_Vannatto Your second description is much clearer. The interconnectivity mapping I provided will work for your scenario. Give me a bit of time to work out the routing. Which console do you want to control the DL32 preamps?
      • Oct 7
    • davep54
      davep54 The X32
      • Oct 7
    • davep54
      Paul_Vannatto Here you go Dave.

      Interconnectivity mapping ([A] and [B] are AES50 ports)
      X32 [B] <-> [A] M32C [B] <-> [A] DL32

      X32 and M32C
      Routing, Inputs
      * Inputs 1-8 -> AES50 B1-8
      * Inputs 9-16 -> AES50 B9-16
      * Inputs 17-24 -> AES50 B17-24
      * Inputs 25-32 -> AES50 B25-32

      Routing, Out 1-16 (setting up a bank of 8)
      * Output 1 -> bus 1 (post)
      * Output 2 -> bus 2 (post)
      ... (etc)
      * Output 6 -> bus 6 (post)
      * Output 7 -> Main L (post)
      * Output 8 -> Main R (post)

      X32
      Routing, AES50 B (to M32C)
      * Outputs 1-8 -> Out 1-8 (X32 outputs)

      Routing, XLR Out (outputs on the back of the X32 console)
      * Outputs 1-4 -> AES50 B33-36 (M32C outputs)
      * Outputs 5-8 -> AES50 B37-40 (M32C outputs)

      M32C
      Routing, AES50 A (to X32)
      * Outputs 1-8 -> AES50 B1-8 (DL32 inputs)
      * Outputs 9-16 -> AES50 B9-16 (DL32 inputs)
      * Outputs 17-24 -> AES50 B17-24 (DL32 inputs)
      * Outputs 25-32 -> AES50 B25-32 (DL32 inputs)
      * Outputs 33-40 -> Out 1-8 (M32 outputs)

      Routing, AES50 B (to DL32 outputs)
      * Outputs 1-8 -> AES50 A1-8 (X32 outputs)
      * Outputs 9-16 -> Out 1-8 (M32 outputs)

      Typically the console closest to the stagebox has control of the preamps. To relinquish control of M32C to X32, select HA Remote AES50 A, on the M32C Setup, preamps screen.

      If you want digital trims on both of the consoles, also select the HA Gain Split. That will mean that the X32 console will have to control the actual DL32 gains on its Setup, preamps screen.
      • Oct 7
  • New
    andyp13
    Contributor - Level 3
    2021-10-04

    Have a sound problem with the DP48. My Dp48 would make my solo guitar sound like Im playing under water..I discovered that the problem is with the Compressor..once it was off the sound was OK, However my drummer now has the same problem but all compression etc is off? He has to turn the guitar off in his mix? Anyone else suffer from this problem?

     

    Sorry forgot to mention, if anyone can help please email me as I will probably never find this post again.

    [email protected]

    read more...
    0 6
  • New
    andyp13
    Contributor - Level 3
    2021-10-04

    Have a sound problem with the DP48. My Dp48 would make my solo guitar sound like Im playing under water..I discovered that the problem is with the Compressor..once it was off the sound was OK, However my drummer now has the same problem but all compression etc is off? He has to turn the guitar off in his mix? Anyone else suffer from this problem? 

    read more...
    0 2
Go to page