Statistics

294,005 members
177,064 posts
  • New
    Brettowen23
    Newcomer - Level 1
    2022-03-12

    Is There aWorkshop manual for these keyboards

    Are the parts readily available

    It has a problem with the keys not returning

    Havent opened it up yet

    0 18
  • New
    MidnightAsylum
    Newcomer - Level 1
    2022-03-08

    I have found the source of the crippling midi issues I have been having with my vc-340. For a long time I have been bitterly sad that I have been unable to use my vc-340 as a midi controller- this was one of the reasons I bought it as it has a large, pressure sensitive and well weighted keyboard. Every time I have used it I have got random sustained notes that don't stop until I restart the recording or reset the midi. I have recently narrowed down what the issue is: using a midi tracking program, I found that when these hanging notes happen, the vc340 is sending two of the held note's note on messages but not accounting for the extranious second message afterwards, so it sends two signals to turn on the note but only one to trun it back off, so the socond note contiues to ring. This issue makes it impossible for me to fully enjoy the extent of the keyboard, and though I do love the synthesisor portion of the vc-340, this issue frequently stops me from using it and leads me to resent it. 

    Please Behringer, fix this issue.

    From an avid lover of your synthesisers.

    read more...
    0 38
    • MidnightAsylum
      ChrisEdwards1 Hi MidnightAsylum, thank you for raising this. I have created a case for you which I will be reaching out to you on to gather some additional information so i may raise/investigate this further.
      Please keep an eye out on your spam/junk folder as on occasion we have seen our responses route to these locations.
      • Mar 8
  • New
    TMav
    Contributor - Level 1
    2022-03-01

    Is there any way to divide the incoming clock signal say for instance using the tempo knob like on the moog matriarch?

    0 13
  • New
    jmill9126
    Newcomer - Level 1
    2022-02-24

    Allow controll of individual voices, like you can on the oberheim 8-voice synth. You just need a way to either select a voice or select all voices (normal mode). When a voice is selected, then all of the relevant knobs (filter,envelope,etc.) would only affect the selected voice. If not possible for the hardware, then please provide a software editor that allows changing all voices separately or together.

    read more...
    0 15
    • jmill9126
      Nigel67 Hi jmill9126. Thankyou for your enhancement request for the FLOW8. We would very much appreciate it if you could submit your request via the Technical Support ticket where we can capture your request and pass it on to the design team for future implementation. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. Many thanks
      • Feb 27
  • New
    JSchur
    Newcomer - Level 1
    2022-02-21

    When I patch the Afterpressure on the back of the Poly D to the Filter, I get no aftertouch response whatsoever; Am I missing something? Is there another setting/switch/knob? 

    0 18
  • New
    Behringer
    Triber Moderator
    2022-02-21
    Behringer invites you to #ShowUsYourSetup!
     
    Studios are where we escape to express creativity and capture inspiration. Whether it's a small desktop setup, bedroom rig, or a full-fledged professional studio - our setups are always unique and tailored to our individual vibe.
     
    Let's share and inspire other musicians and producers around the world!
     
    To feature your setup across #Behringer Social Media Pages, simply share a photo with us in the comments below!
    read more...
    0 20
  • New
    Deepminduser99999
    Newcomer - Level 1
    2022-02-19

    Where to find a deepmind replacement display

    0 7
    • Deepminduser99999
      NicJonesMT Hi there.
      Please click support at the top of the page and submit a Spare Parts Ticket.

      A member of the Parts team will then be able to advise you further.
      • Feb 20
  • New
    Behringer
    Triber Moderator
    2022-02-18

    Introducing the 'Synth Wizards' sound bank for DEEPMIND series Synthesizers.

    Consisting of an entire bank of carefully crafted sounds, inspired by synthesis legends, we are thrilled to provide this free sound bank, bringing a inspiring new palette of iconic sounds to your DEEPMIND.

    Featuring stunning pads packed with motion, electrifying sequences, massive leads, this collection is loaded with textures and sounds that will transform you into the next Synth Wizard!

    Available for free and exclusively for the Music Tribe Community. 

    We Hear You. 


    View Attachment
    read more...
    4 4,596
    • Behringer
      Behringer To download the sound bank, simply click the 'View Attachment' link. We hope you enjoy your new patches!
      • Feb 18
    • Behringer
      domklein Thanks guys !
      • Feb 19
    • Behringer
      JohnSeigman Thanks! Looking forward to hearing how they sound.
      • Feb 19
    • Behringer
      bomarm

      How many patches are supposed to be in the bank?

      • Feb 19
      • Free 'Synth Wizards' Sound Bank for DEEPMIND Series
        Behringer Hi bomarm - There are around 70 new patches in the Synth Wizard Sound Bank. Many thanks - Dan
        • Feb 21
    • Behringer
      SevenSuccurro

      Thank you for the free patches!

      • Feb 21
  • New
    Ste123
    Newcomer - Level 1
    2022-02-17

    Bought a second hand Behringer MS 101, had it sitting on shelf for 2 months, just set it up in studio and it's about 3 semitones out of time, any one else have this problem.

    And or how to fix 

    Cheers Ste

    0 17
    • Ste123
      NicJonesMT Sorry for the delay Ste123.
      If you haven't done so already, please click support at the top of the page and submit a technical support ticket. From there we can then advise you further.
      • Feb 20
  • New
    taudier
    Newcomer - Level 2
    2022-02-15

    I found a bug in the DeepMind, can you reproduce it ? Let us know !

    In short : 3 unison LFOs with a phase spread trigger the VCF envelopes.

     

    From a default program (PROG + COMPARE) :

    - VCF envelope : trigger by LFO 2; decay 70; sustain 0;

    - VCF panel : LFO fader 0; ENV fader max; FREQ fader 0

    - VCA and VCF edit menu : sensibility to velocity set to 0

    - Polyphony set to 3 unison voices

    - LFO 2 edit menu : rate 100; Key Sync ON; Phase SPREAD 70;

    Or the SysEx for the Edit Program at the end (replace the program that you are currently editing).

     

    Press and sustain a key and listen carefuly, mostly at start when you press a key.


    Your voices are also stacked/mixed at start ? Like in the picture below :


    p.82 of the manual we have "LFO-2 - This option will force the envelope to be triggered each time LFO 2 starts a new cycle."

    In my experiment all the LFOs have the same duration, if they start together they end together. If they start spread they end spread. And the cycle repeats itself. This is not what one observes, the first cycle is different from the others.

     

    SysEx :
    F0 00 20 32 20 00 04 07 00 00 00 01 00 00 00 00 00 64 00 01 01 00 47 00 00 01 01 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 02 02 00 00 00 00 01 7F 00 00 00 01 00 00 60 00 01 00 00 00 00 7F 15 00 00 00 00 00 00 00 54 49 00 00 02 00 00 00 5C 00 00 00 00 00 00 00 5A 00 00 00 7F 7F 00 00 00 02 02 00 00 00 00 00 11 00 01 00 00 00 00 00 49 00 00 00 00 00 00 00 24 00 00 00 00 00 00 00 12 00 00 00 00 00 00 09 70 0E 00 02 00 00 00 00 7F 00 00 00 00 00 00 00 7F 00 00 00 00 00 00 00 7F 00 00 00 00 00 00 00 7F 00 00 00 00 00 00 00 41 00 00 00 78 09 01 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 64 64 01 44 00 65 66 61 75 6C 74 20 00 50 72 6F 67 72 61 6D 08 20 00 00 00 00 00 00 F7

    read more...
    0 53
Go to page