Hi Tribers - I am new here, I apologize if I am wrong with my post.
I have created a new track with only the Deepmind (+vocals) and wanted to know what you think of it. How can I contact the marketing team at Musictribe?
Here is the video:

https://youtu.be/2zdyHKei1mM

As the title indicates. Anyone know how to do this? I do not see it in the software. I need to change this since I am using CV out to control Moog Rogue. Since the two keyboards do not start at the same lowest note playing the A on the Poly will produce a D note on the Moog.

Any help or input on how to set this up would be most appriciated!

Secodn unit, blue version, MS1 not 101, purchased couple days ago.

Both units have similar problem - when sending midi clock (either through THRU port or OUT midi port) - they create syncing issue. The next instrument connected via midi in getting sync information from MS1, drifts... and simply get out of tempo.

This is very random could not happen for 20-25 min, can happen for the next 5 minutes non stop.

Switching reseting upgrading to newest OS - no help, stil the problem.

When the device is last in the midi chained setup - and just receives midi data - it's ok, it's synced, and plays music well.

Problem happen when the midi (or sync) is sent out of MS1. 

I tested barebone setup, unplugged everything in my studio, midi and audio, and just plugged MS1 and Behringer TD3.

Tested both units sync-wise, first as a master and then as a slave.

When MS1 ia a master clock (either MIDI connection or via gate out/sync in patches) it always creates sync issues.

Has a problem to keep sync. When MS1 is slaved to TD3, either way - midi or patches - it is perfect, MS1 follows the tempo without any issues or drift.

I can record video of the issue. Contacted already with the seller/distributor in Poland, and they are trying to help me with that.

Seems it's a problem with this units, when used in a chain with other devices, MS1 makes a midi havoc on it's midi out/thru.

TO the extent, when it was in my semi-complex system, I noticed it does SEND MIDI CC data(!)

it shouldn't in theory, right but it does send randomly value of 0, midi channel 1, midi CC0. It also sends start stop to my other sequencers randomly (juno 06a, elektron), simply when inserted in my midi setup, it made some real chaos, like everything in my setup was perfectly working, and now, randomly things go crazy....

When MS1 unplugged from the setup - everything is perfect as it was.

I can use it as a synth engine and avoid sequencer, midi out, only midi IN

Behringer, it is serious problem, not some small issue, most users can't probably notice that problem until they plug it into more complicated system with many midi devices.

My MonoPoly has the latest firmware.

When synthtool has the clock set to auto, plugging a midi din cable the ARP will not sync to incoming clock. If you turn the mg2 knob it changes the speed, so basically it's doing internal clocking

If I change clock to External Din, it works perfectly, if i  set it back to auto without powering the synth off it works, but the next time i start it up it won't sync again. It's like it defaults to 'internal' at every power off.

Hi,

I experienced a noise on the upper part of the HPF fader on ODYSSEY. This noise is stronger in some configurations of the synth chain. What can it depend on?

I absolutely love the Behringer Monopoly, but sadly its missing the built in step sequencer other Behringer synths have.

If connected via midi, could I use the keys of the Monopoly to program the step sequencer of a Behringer Crave (including cords), then use the step sequencer of the Crave to let the Monopoly play?

If the step sequencer of the Behringer Crave is not able to save cords, would the step sequencer of a Behringer Poly D be able to do the job?

I am very happy with my Deepmind 6. I have a question about tuning and calibration. I have slight detuning on my C and F notes which cannot be fixed using global tuning settings. It actually sounds completely normal until one matches the pitch with software VSTs (e.g. DIVA). The drift (so-to-speak) is not enough to cause alarms and has a charming analog character - which is what I paid for :)

DCOs are however more stable than VCOs and the manual advises against calibration (except after firmware upgrades or recommendations from Behringer engineers). 

Open to any advice on whether I should try and run voice calibration?

Ciao! Buonasera Synthomani.

Vorrei usare la TD3 come modulo sonoro. Usando una  Korg Electribe MX (blu valvolare) come master. Ho provato gia a premere tap back insieme premendo il canale 2 ed è andata in clock tempo e fin qua tutto ok. Adesso (Vedi foto allegata) ho seguito tutta la pricedura dalla macchina Sia di impistazione canale midi e Sia messaggi midi impostando i filtri ma non riesco a trasmettere nulla. Come potrei fare? Vi chieso aiuto. Scusate grazie Sono alle prime armi! Buona Sera a tutti