Statistics

289,556 members
172,074 posts
  • New
    Stubedo
    Newcomer - Level 1
    2022-06-24

    Hi, can anyone help, I have the A-440 tone coming out of the synth, but can't get a sound from the oscillators. Never had this problem before,had the synth for a year and a half?..

    0 28
    • Stubedo
      PedroRodrigues Hi Stubedo, thank you for your post, in this case I would suggest performing a the full calibration process for you Model D, for that please follow the link below to access the full guide for this process:https://wsi.li/dl/gSWYhHea8zpCPqDzy/ Thank you
      • Jun 26
    • Stubedo
      Stubedo This looks like a scammers site,,,The link above?
      • Jun 26
  • New
    cRIESis
    Newcomer - Level 1
    2022-06-18

    Hello everybody and i hope someone can fix my problem?

    When i connect the TD-3 through the USB port to the Roland DJ808 NO sound..

    When i connect a Roland TB-3 through the USB port to the DJ808 everything works fine!

    So why is the TD-3 give no sound....Thnx

    read more...
    0 6
    • cRIESis
      WilliamR The USB on the TD-3 only transmits and receives midi information via PC. The USB does not transmit any sound.
      • Jun 18
  • New
    dadad
    Newcomer - Level 1
    2022-06-09

    Playing consecutive notes will lose certain notes. I used to do this a lot, but it never happened and I was very impressed by it. Also I remember some users complaining about Wasp not being able to accurately handle such consecutive notes, not the  td3 /cat PRO1 . I think this is a new problem that has only recently appeared, so why should it create new problems for no reason.

     

    Now, consecutive notes must be kept at a certain distance to be processed correctly, which was not the case before.

    read more...
    0 17
    • dadad
      NicJonesMT Hi Dadad.
      Can you please click support at the top of the page and submit a technical support ticket.
      Please provide as much detail on your setup as possible and we can then advise you further on this.
      • Jun 10
  • New
    Behringer
    Triber Moderator
    2022-06-01

    Caption this great image one of our customers sent in:-)

     

    ---
    Collaborate with our synth developers, share your ideas and get a chance to win free synthesizers by participating in our activities at our Synthesizer and Drums Behringer Music Tribe FB Group. We’d love to see you there!

    https://www.facebook.com/groups/KeysandDrumsBehringerMusicTribe/

    If you are a passionate and experienced mixed architecture hardware or embedded software engineer and would like to join the leading musical instrument team, please send your resume to [email protected]


    #WeHearYou #behringer #MusicTribe #synthesizer #synthesizers #drummachines

    read more...
    1 10
  • New
    Kev123
    Newcomer - Level 1
    2022-05-30

    I recentley received my TD-3 and by mistake deleted all the factory default patterns.

    Is there any way that I can retrieve the factory default Patterns on my TD-3.

    Is there perhaps a sqs file that i can reinstall the default patterns

     

     

     

    read more...
    0 5
    • Kev123
      PedroRodrigues Hi Kev123, thank you for your post, unfortunately there is no process on the TD-3 to restore default patterns. Thank you
      • Jun 10
  • New
    Behringer
    Triber Moderator
    2022-05-26
    Many of you have asked us to explain our design processes. Over the past decade we have heavily invested in "Digital Twin" simulation tools. This technology allows us to first design a product in a virtual world, before building a physical product. This advanced process improves design quality, tremendously speeds up development time and significantly reduces cost.

    https://www.youtube.com/watch?v=CbeSmEdrrds

    Please let us know if you have any questions.

    Collaborate with our synth developers, share your ideas and get a chance to win free synthesizers by participating in our activities at our Synthesizer and Drums Behringer Music Tribe FB Group. We’d love to see you there!

    https://www.facebook.com/groups/KeysandDrumsBehringerMusicTribe/


    If you are a passionate and experienced mixed architecture hardware or embedded software engineer and would like to join the leading musical instrument team, please send your resume to [email protected]

    read more...
    1 237
  • New
    Behringer
    Triber Moderator
    2022-05-26
    Movement MCS Percussion Computer MK2.
    read more...
    1 4
  • New
    Behringer
    Triber Moderator
    2022-05-23
     
    Great news - SYSTEM 15 and SYSTEM 35 are now shipping from the factory, while SYSTEM 55 will come a week later.
    We know it has taken much longer than we expected, but we finally got the missing parts so we were able to complete the production. Hopefully we'll have some more good news soon:-)
    Thanks for your patience. Much appreciated.
     
    ---
    Collaborate with our synth developers, share your ideas and get a chance to win free synthesizers by participating in our activities at our “Synthesizer and Drums Behringer Music Tribe" FB Group. We’d love to see you there!

    https://www.facebook.com/groups/KeysandDrumsBehringerMusicTribe/

    If you are a passionate and experienced mixed architecture hardware or embedded software engineer and would like to join the leading musical instrument team, please send your resume to [email protected]

    #WeHearYou #behringer #MusicTribe #synthesizer #synthesizers #drummachines
    read more...
    0 305
  • New
    Eptiar291
    Newcomer - Level 1
    2022-05-13

    Since the latest firmware update, the crave is no longer able to clock correctly to USB (latency) and the option to control the arp or sequencer's subdivision using the TEMPO knob has stopped. I've noticed other forums mention this issue too. Please hear us Behringer and fix this issue <3

    read more...
    0 41
    • Eptiar291
      PedroRodrigues Hi Eptiar291, thank you for your post, I would first suggest confirming that your unit is running the latest firmware available, version 1.1.3 via SYNTHTRIBE.

      It would suggest setting Clock source to TRIG CV in the App and test to see if it works.

      If this does not work, please follow the link below to request assistance request directly to our Tech Support Team:

      https://community.musictribe.com/pages/create-new-ticket?type=Technical%20Support&brand=Behringer


      I hope this helps.


      Thank you
      • May 14
      • Behringer Crave's Latest Firmware
        Eptiar291 Hia mate. Just tried using trig cv but my master clock is ableton. All the MIDI settings in ableton seem to be correct but still no luck. The feature to sub divide the arp/seq rhythms just isn't there anymore either. Would it be best to contact the support team?
        • May 14
  • New
    Milu
    Newcomer - Level 1
    2022-05-12

    Hi everyone,

    I bought a deepmind 12d and used it in mexico with 110v until now. I am in italy now and would like to know if I cam plug it into 220v without and voltage converter, or if I need to get one. I'm in italy since 1 week and can't find any trustable opinion yet. The former owner says he bought it in Europe and already used it with 220. But other synth gurus told me to get a converter or it will melt.

    On the back of the machine it says 110-240 next to the plug.

    Thank you

    read more...
    1 23
    • Milu
      PedroRodrigues Hi Milu, thank you for your post, please consider that the DeepMind 12 D has a power supply with Internal Switch-mode PSU Autorange 100-240 V,(50/60 Hz), this means that the unit will operate on 110V and 240V without the need of any voltage converter. This information is stated on the manual for your unit that you can access by following the link below: https://www.behringer.com/behringer/product?modelCode=P0CF7 Thank you
      • May 13
    • Milu
      RonaldFigura In the future you might want to vet your "gurus". A good guru would have suggested you check the specifications in the documentation. Like Pedro suggested.
      • May 20
Go to page