Statistics

250,734 members
127,930 posts
  • New
    Dj30a
    Newcomer - Level 1
    2021-04-16

    I have a CONTROL2USB I bought a few months ago. The volume control is malfunctioning..... when the system is off it’s still bleeding music, and making a cracking soumd

    0 108
    • Dj30a
      DavidKnighton Hello Dj30a,
      This item will require service. Please click the SUPPORT tab at the top of the page and submit a SERVICE REQUEST case.
      • Apr 17
  • New
    goodtime_vs
    Contributor - Level 2
    2021-04-09

    Hello guys,

    Could somebody help me to find out the possible manufacture date of Konnekt 48 device I've purchased recently? Its Serial Number is (21) 10070257 and TC Item Number is 967300051. Another interested detail that OPTO and ADAT toslink ports have different design, OPTO ones have no covers, but ADAT ones have doors. I've attached a photo of the internals as well (can provide more, if needed).

    Thanks,
    Vitalii

    read more...
    0 73
    • goodtime_vs
      goodtime_vs More photos:
      • Apr 9
    • goodtime_vs
      PedroRodrigues Hi goodtime_vs please consider that from your serial number I think your unit was manufactured in 2007 but I cannot confirm this information
      • Apr 14
      • Possible manufacture date of Studio Konnekt 48 audio interface
        goodtime_vs In case anybody needs it, the latest firmware is installed with the drivers and located here: C:\Program Files (x86)\TC Electronic\TC Near\Firmware
        • 1
        • ·
        • Apr 16
  • New
    Oboroten
    Newcomer - Level 1
    2021-03-17

    Xenyx control 2 usb only uses the ASIO4ALL driver? Are there any other options?

    0 109
    • Oboroten
      Nigel67 The ASIO Driver download appears to be missing from the Control2 USB website page. Apologies for this. I will get it put back up. The ASIO4ALL is the correct driver.
      • Mar 17
  • New
    jongold
    Contributor - Level 1
    2021-03-11

    Hi, For the life of me I can not figure out how to change the rotary knob adjustment assignment in the Radar screen from speed to anything else.

    Help please and thanks,

    Jon

    0 42
  • New
    MarcLez
    Newcomer - Level 1
    2021-03-07

    When restarting my DAW audio project the plugin LM2N is loaded but always with the Right channel selected. I use the plug in with a right channel displayed and in the next slot with a left channel displayed. Please update the plugin so the chosen channelsetting keeps as set on saving.

    read more...
    0 70
  • New
    JMJMJM
    Newcomer - Level 1
    2021-03-04

    Hello, 

    I would like to ask about Clarity M Stereo's compatibility with macOS 10.7.5. I cannot install the latest software and I think the problem is that the latest software is not compatible with an old version of macOS).

    Is there any way to download the old version of the ‘Clarity M Stereo Plug-in macOS Mac’ like 1.0.x which is compatible with macOS 10.7(Lion)?

     

    Thanks!

    read more...
    0 85
    • JMJMJM
      PedroRodrigues Hi JMJMJM please consider that you are referring to a OSX released in 2011 so I would not advise your to interface the unit is that OSX version and use at least version macOS 10.13 High Sierra. Thank you
      • Mar 16
  • New
    lemix
    Newcomer - Level 1
    2021-02-07

    Hello there,

    The headphone jack [ upper/switching ] is broken. Could you please help me locate the correct part so my technician can have it installed.

    Link to a site selling the part would be appreciated. Ideally I'd like to order directly from your parts department.

    From a picture [  https://logout.hu/bejegyzes/vodkaboy22/uj_kedvenc_dac_adc_interface-em.html ]   it looks like this is a double stacked (2units) stereo, switching, through hole ,1/4" jack

    Your prompt help would be much appreciated.

     

    Le Mix Production
    Professional Audio Services
    [email protected]
    https://www.facebook.com/lemixproduction
    Andrew St.George_416 503 3350

     

    read more...
    0 64
    • lemix
      RexBeckett Hi, you can request parts by raising a Care ticket.

      At the top of this page, click Support then scroll down the new page and select Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • Feb 7
    • lemix
      PedroRodrigues Hi lemix sorry I just came cross your case , please consider that this unit is discontinued for some time now and we do not have much parts available might also be useful to contact our partners for any faulty unit they might have and you will be able to extract some useful parts.
      • Feb 24
  • New
    Wellroundedproductions
    Newcomer - Level 1
    2021-02-02

    I have a brand new out of the box unit that will not boot past the "clarity m" logo. Everything is still boxed from factory... I am beyond disappointed. Is there any hard resets? Or anything I can try on my end? Or a hardware repair? What's the warranty on these things? :(

    read more...
    0 111
    • Wellroundedproductions
      Nigel67 Hi, i am sorry to hear that you are experiencing issues on your product straight out of the box. If it is still under 30 days old, then I would advise contacting the shop that you purchased the unit from and ask for DOA replacement. If it is over 30 days old, then please click on the support tab at the top of the page. In the new page that opens, scroll down and click on the Service tab and submit a ticket. I would not advise opening the unit in any way as this will void your warranty. Have you tried connecting the unit to a computer and seeing if you can upgrade the software? Please check this link for upgrading. There are also instructions in the user manual.
      https://community.musictribe.com/pages/kba?articleId=5e1bec50-2ecd-ea11-a812-000d3ac693d8&brand=TC%20Electronic
      • Feb 1
      • “Clarity M Stereo”
        Wellroundedproductions Unfortunately it won’t boot to the point where I can put it in usb mode. Yes this is a bran new item. Unfortunately it sat in the box unopened for more than 30 days really bummed. I submitted a ticket but this suckssss
        • 1
        • ·
        • Feb 2
      • “Clarity M Stereo”
        Nigel67 I can only apologise again. One of my colleagues will take care of the repair details for you. This is definitely not to the standards that we strive to meet.
        • Feb 2
    • Wellroundedproductions
      GoosesGaggle123 i am having the same issue, any advice?
      • Apr 8
  • New
    derekbrin
    Newcomer - Level 1
    2021-01-27

    Where can I find presets and installers for my Clarity M? Are there any recent updates like a Netflix preset?

    I vaguely remember an option to get additional presets but I cannot find anything online and anything out there is well over 2 years old.

    With the loudness war coming back around again as we mix music for streaming and film for Netflix a lot of us Clarity users are praying for new presets while we use the current metering plugins that are all up to date. I hope TC doesnt forget us.

    read more...
    0 67
    • derekbrin
      PedroRodrigues Hi, derekbrin they can be downloaded from the product page on tcelectronic.com.
      Please note that Factory presets 1-5, which normally cannot be altered from Clarity M but can be edited, moved or deleted when connected to a computer.
      • Jan 27
  • New
    bradp015
    Newcomer - Level 1
    2021-01-14

    Hi, 

    Having some trouble making this work.

    Clarity M >>>stock cable d sub fanout #1 cable to BNC to XLR adapter (as stated in manual)>>>connected to 1. mackie dl32r AES out, and 2. Aphex Compellor AES out. Signal present at outputs but not apparent at Clarity meter. (I have not confirmed signal is at the AES output but assume it would be on both devices)

    I see metering at about 20-30db less than expected. (It may be just noise? I do not have a way to monitor the AES outputs of the mackie and compellor) Peaks around -35db. Although Im running a -12LUFS signal out the analog outputs of both devices. (mackie and compellor)

    > On the mackie I was not able to get lock when I adjusted input to AES1 on the clarity. Never locked.

    > on the Compellor, lock didnt happen for a while, although I was new to connecting to AES and it may have been user error in selecting AES1 in the sys prefs.)

    I am using the adapter stated in the manual. I am using the stock fan out cable. Nothing else is connected other than power to the clarity. I have used this unit with Optical sp/dif and toslink with success. (analog RCA to AD converter to clarity). I have also tried AES out of a x32 without success. Pls comment if you have ANY troubleshooting ideas!!! Thank you!!!!!!

    Any help apreciated!!!

     

    Brad P

    thank you!

    read more...
    0 90
    • bradp015
      PedroRodrigues Hi Brad have you tried specific AES 50 cables on the case of the Mackie as the AES50 is transmitter at higher frequencies than the one supported via a XLR cable? Are you using the Neutrik NA2FBNC adapter to bridge the BNC connection with XLR connection present on the Sub D cable? Have you selected the digital input source for AES on the Clarity M?
      • Jan 15
    • bradp015
      bradp015 -- I'm using the cable provided by TC electronics.
      -- I am using the Neutrik adapter to bridge the BNC connection with XLR connection present on the D sub cable That is provided in the clarity box. The fan out cable.
      -- I have selected the AES one, AES two, AES three, and optical choices on the clarity.
      Thank you for your ideas
      • Jan 15
    • bradp015
      bradp015 Any other things you think I might try???
      • Jan 16
      • Clarity M running in stereo via AES XLR adapter connector not working
        PedroRodrigues Hi bradp015 can you confirm that when you select the digital input, you are selecting the correct channels? The options are AES 1, 2, 3, 1-3 (5.1 surround).
        • Jan 18
    • bradp015
      bradp015 thank you Pedro!!!
      When i select the dig channels i can see on the display AES1, AES2,AES3 etc....
      How long does it take for the clarity to lock to the digital input?
      Does it auto select the sample rate/bit depth?
      The manual isnt very specific about it all..
      thank you for your help!!!
      • Jan 18
      • Clarity M running in stereo via AES XLR adapter connector not working
        PedroRodrigues It should not take long to lock on to the input signal. Can you please provide details on the signal inputting on the Clarity M? Thank you
        • Jan 19
    • bradp015
      bradp015 The device is a Aphex Compellor with AES out. The XLR to BNC adapter to the tc elec included cable assembly fan out with D sub is connected to the clarity. Signal is a commercial song playing thru the mackie dl32R going to the compellor. The analog outs of the comopellor is routed to a tricaster video switcher.
      • Jan 19
      • Clarity M running in stereo via AES XLR adapter connector not working
        PedroRodrigues Hi bradp015 can you confirm if the signal outputting form the tricaster is AES3?
        • Jan 20
Go to page