Statistics

242,680 members
119,076 posts
  • New
    David20k
    Newcomer - Level 1
    2021-07-23

    greetings guys, i just acquired the flow 8 recently but am finding it difficult updating it. the SimplyPUT (MAC) Update-Tool is not installing on my mac. this is what its showing on my screen. please help

    read more...
    0 8
  • New
    padand
    Newcomer - Level 1
    2021-07-17

    One of the clubs I work for uses a xenyx 1002fx to mix sound and send it to a dcx2496. It goes over a pretty long distance, right along the power wires... I know the xenyx output is unbalanced and the sound quality is obviously reduced. They just used some TS to XLR adapters to make everything connect and they thought it would work. I am thinking of using a passive di box to balance the signal, would that make sense? Or could someone recommend an alternative, preferably from behringer as well?

    read more...
    0 11
    • padand
      RexBeckett Hi padand, it does make sense to balance the signal but a normal DI box would reduce the level too much. A better solution is to use transformers that are designed to operate at line-level. One example is the Behringer HD400.

      See: https://www.behringer.com/product.html?modelCode=P0387
      • Jul 17
    • padand
      padand

      Thanks a lot, this worked out great!

      • Jul 27
    • padand
      padand The HD400 in action, mono input, loopback recording of the TRS output on a stereo track :)
      • Jul 27
  • New
    Nattylgg
    Newcomer - Level 1
    2021-07-06

    Hi, 

    I recently bought the deepmind 12, the software doesn't work someone could help me?

    I attached a picture below 

    0 12
  • New
    Satsuzie
    Newcomer - Level 1
    2021-06-27

    When I try to install the software on my macbook I get the following comment: X-AIR-Edit can't be opened because Apple can't verify the file on malware. This software needs to be reviewed. Contact the developer for more information.

    How can I solve this problem?

    read more...
    0 18
  • New
    DouglasDimeler
    Contributor - Level 1
    2021-06-25

    One of my installations of an X32Rack is experiencing scene memory recall issues. I instructed them to make sure they return to a basic scene for their daily operations before they shut down each time, to make it easy for everyone to just turn it on and go. However, some channels that are supposed to be muted come up unmuted, and levels are mysteriously changing and causing feedback issues. I've donw updates of firmware, and plcing the scenes at new locations to try to alleviate the probelm, but it eventually follows to the new locations with the same result. The unit has been in place for 5 years now, and I'm wondering if there's a fix for this issue.

    read more...
    0 25
    • DouglasDimeler
      RexBeckett Hi Douglas, are they forcing the configuration to be saved by using Setup -> Shutdown after loading the basic scene?
      • Jun 25
  • New
    Babkine
    Newcomer - Level 1
    2021-06-15

    Reset X-Touch

     

    0 25
    • Babkine
      RobbyWingfield Hi Babkine, this is Robby with Music Tribe, there is no factory reset on the X-Touch. Please submit a support case at the link above and we can help get your X-Touch up and running!
      • Jun 17
    • Babkine
      Babkine

      Thank you, but the machine is broken and I will wait for the next one, I will keep you informed if the situation does not change. thanks again. Best regards.

      • Jun 17
  • AndrewMorrison
    Contributor - Level 2
    2017-06-09
    I have a Behringer Eurorack UB1222FX pro, I am playing with a band and going to a bar with an unknown sound setup so I plan to use my mixer as "main" into the house board. Most forums talk about running from the aux out and by all means avoiding the xlr mains out to connect to the house board. What should I do to connect, I.e: Ctrl out 1/4 inch, xlr main to 1/4 inch, cd RCA out? Let me know
    read more...
    0 391
    • AndrewMorrison
      CraigFowler On that mixer I'd use the main XLR outs into a balanced pair of inputs on the venue's console. It the only set of stereo outputs on your mixer that are balanced.



      Just make sure that the venue's console doesn't send +48V back to it (stick a DI between the mixers if that helps.) Whatever input it's running into should be set at unity gain so as not to "colour" the sound coming from your mixer.
      • June 9, 2017
    • AndrewMorrison
      SteveBenz i have a 1222fx and just moved my equipment. I connected the mic and no longer get a reading on my VU meter and cant figure out what I changed in transit
      • Jun 16
  • New
    MeadowbrookBaptistChurch
    Newcomer - Level 1
    2021-06-15

    How do i connect the Behringer p-16 interface with a Allen and Heath zed 24 channel analog mixer?  The only way I seem to be able to get it to work is by partially plugging the 1/4 plug into the input jack.  I have tried with tip ring sleeve and tip sleeve and have same results.  

    read more...
    0 39
    • MeadowbrookBaptistChurch
      DavidKnighton Hello MeadowbrookBaptistChurch,
      I you're partially plugging the cable into the unit, then that usually means you're using the wrong type of cable or connection on the Zed mixer. It would help to know what outputs on the Zed mixer you're trying to use. I would expect you to be using the Aux outs or Main outs, but something tells me you're trying to use the INSERTS as an outputs. This would work in theory, however the INSERT pinout is a little different than a standard Balanced output, so you could probably expect some odd behavior. If this is the case, here's what I would recommend; using a BALANCED 1/4" cable (TRS), plug the MONO out of the Zed mixer into any input on the P16-I. Observe the results. Another thing you could try is using a dual 1/4" aux cable and test input into the P16-I with a phone or tablet.
      • Jun 15
    • MeadowbrookBaptistChurch
      RexBeckett If you want to use the channel Insert sockets as outputs, you can get ready-made adapter cables.

      Example: https://www.amazon.com/gp/product/B00FC4Z6WQ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

      If you are handy with a soldering iron (or know someone who is), the adapter cables are easy to make. The wiring is as shown below.
      • Jun 16
  • New
    cliffconway
    Newcomer - Level 2
    2021-06-12
  • New
    GersonCr
    Newcomer - Level 1
    2021-06-11
    Inglés
     
     
    Quisiste decir: 
    Compre una helicon play acoustic pero no veo ningún botón de encendido y apagado, como debo prender y apagarlo?
     
     
     
     
     
     
    I bought a helicon play acoustic but I don't see any on / off button, how should I turn it on and off?
    read more...
    0 33
Go to page