Statistics

285,086 members
166,989 posts
  • Sarindeep
    Newcomer - Level 1
    2020-10-19

    hi I just need my amp serviced I've really enjoyed the product and wanna fix it.

    0 73
  • clive1101
    Newcomer - Level 1
    2020-10-04

    Hi, i have a tannoy definition subwoofer on its third amplifier board and can't get another, any ideas for a replacement amp and do the speakers work in phase ie both move out at the same time or push pull ie one one inwards and one out on the same note

    read more...
    0 107
    • clive1101
      john0121 Hi Clive, sorry to hear the problem with your definition. Can you please reach out direct to our service team via the Support button. They will be able to discuss options with you if you can provide details of the 3 previous repairs.
      • October 4, 2020
      • definition subwoofer faulty
        clive1101 Thank you, first two repairs boards were supplied via post under warranty and last repair involved sending the boards, both amp and power, to music tribe whereupon i was told there were no further replacements available, i am now thinking of fitting a third party amplifier but need to know how the speakers are wired, ie both push at the same time or push pull
        • October 5, 2020
      • definition subwoofer faulty
        clive1101 thanks
        • October 5, 2020
  • annareccia
    Community Manager
    2020-06-15
    Hi all, it’s Anna here, Customer Branding Lifestyle Specialist here at MusicTribe. I’m looking forward to collaborating with you, girls and guys! If you have any questions, feel free to ask. Ciao!
    0 46
    • annareccia
      Dukester I've had nothing but trouble trying to put in a care ticket, first one says the issue was resolved but no one ever contacted me, and the second ticket isn't showing yet. Can I speak to someone to get a ticket to send the unit to Las Vegas for repair?
      • June 15, 2020
      • Welcome to MusicTribe Community!
        AlexLane Hi Cecil, could you send me details of the first ticket, case number ideally? I will forward this to the dev team also to look into. Thanks!
        • June 16, 2020
  • Paulo1
    Triber
    2020-06-12
    Welcome to our new Music Tribe community 2.0, I’m Paul O’Farrell-Stevens, leader of the Music Tribe Customer Branding team. 

My highly-skilled team of Customer Branding Specialists are really looking forward too engaging, co-collaborating and co-developing new and exciting product content. We will be seeking new talent, fans and beta testers that want to join us to co-create inspiring content. We Empower, You Create
    read more...
    0 44
  • jnew
    Contributor - Level 1
    2020-06-08
    0 677
    • jnew
      jnew

      Hey Guys, 


      New member here with first post. I just bought a TC Electonics Brainwaves and am trying to figure out how to do a very simple effect with it. For the time being I just want to run it mono with a detune effect. I just want the dry signal and 6 or 7 cent effect on it. No delay, no repeats, none of the 2nd's, 3rds, 4ths or other semi tones or octaves. Just a straight forward 6 or 7 cents that I can mix in. I drove all over this town to find the appropriate cable and have downloaded the tone print app. But I can's find where you can set individual cents. Can anyone help? Thank you,


      James

      • June 7, 2020
  • DJBOGS
    Contributor - Level 1
    2020-06-06

    What is the RMS per channel in 8ohms load? Thank you!

    0 112
  • bobbywolfe
    Newcomer - Level 2
    2020-06-05

    Trying to hook up an android to a xenyx mixer. Am I understanding correctly that you need a mono (not stereo 1/4"adapter) to get the correct signal into a mono channel or a 3.5mm to a splitter 1/4 mono to go left and right? 

    0 97
    • bobbywolfe
      RexBeckett

      @bobbywolfe 


      Hello Bobby, welcome to the community.


       


      You should use a stereo splitter cable like this and connect to a stereo channel. There really is not a way to connect both stereo sides to a mono input but you could connect just one side of the splitter cable if you don't have a spare stereo channel. 


       


      Cables that have a 3.5mm TRS plug on one end and a 1/4" TRS plug on the other will not work correctly for this application.

      • June 5, 2020
  • Markcuson
    Contributor - Level 1
    2020-06-04
    0 69
    • Markcuson
      ChrisEdwards1

      Hi @Markcuson,


      I hope you are well.


      It is only possible to link like for like units via Bluetooth, unfortunately with this in mind, the setup mentioned will not work. Please also note this is the same for the V1 and V2 versions of the iP Range.


      Due to a difference in DSP, it is not possible to link for example an iP500 V1 with its V2 counterpart.


      Hope this helps


      Christopher Edwards


      Customer Solutions Lifestyle Specialist

      • June 4, 2020
  • Matrixar
    Contributor - Level 2
    2020-05-28

    How do I connect headphones to the Behringer UMC1820 interface so I can listen to sound from the computer? It seems like it wasnt meant to but it has to be. Im confued and angry : ( !!!

    Also: Connecting to the line outputs makes me hear the left earphone, and interestingly enough, when i plug it in half the way, I have stereo... But the quality is poor

    read more...
    0 1,457
    • Matrixar
      RexBeckett

      @Matrixar 


      Hello Mateusz, welcome to the community.


       


      The UMC1820 Phones output can be set to monitor USB playback 3/4 or a mix of USB playback 1/2 and the inputs - which is controlled by the Mix knob. Connecting stereo headphones to the balanced mono line outputs will not work correctly.


       


      Most of the time when people have problems using headphones with UMC interfaces it is because the headphones have four-pole TRRS plugs intended for smartphones. To use these with a normal stereo TRS outputs, it is necessary to use an adapter cable like this between the headphone plug and the 3.5mm to 1/4" adapter.

      • May 28, 2020
    • Matrixar
      Matrixar

       I dont think beyerdynamic DT880 are intended for phones...
       


      Yeah, I kind of forgot to mention, obviously i tried connecting it to the headphone output if I tried to do line now... Im not that stupid, but connecting it to the headphone out gives no sound at all. I mean obviously, since windows doesnt even recognize this out? Turning the mix knob just makes more and more hissing noise, when its set to mono its in both earcups... But Its still only hissing, and when the mix monitor knob is set to stereo its only left ear. Is it supposed to be like that?


      Can u explain more clearly what do I have to do in order for this to work?? : P

      • May 28, 2020
    • Matrixar
      RexBeckett


      @Matrixar wrote:


       I mean obviously, since windows doesnt even recognize this out?





      @Matrixar 


      Did you install the UMC1820 driver? Check in Windows Control Panel -> Device Manager to see if the device is listed under Sound, video and game controllers. If it isn't there or is marked with an error flag, you should uninstall it, disconnect the USB, reboot and then reconnect the USB.


       


      When installed correctly, all the outputs should be listed on Windows Control Panel -> Sound -> Playback. In the device Properties there are settings for the level controls which may need adjustment (to 100%).

      • May 28, 2020
    • Matrixar
      Matrixar

      Yes I did... As it pretty much didnt work at all before I did it

      • May 29, 2020
    • Matrixar
      RexBeckett


      @Matrixar wrote:


      Yes I did... As it pretty much didnt work at all before I did it





      @Matrixar 


      So you are playing music to UMC1820 outputs 1/2, you have headphones connected to one of the UMC's Phones outputs, you have the 1/2 button out and the Monitoring Mix control turned clockwise and you don't hear anything? What software are you using for playback?

      • May 29, 2020
  • Uniquecuddles
    Contributor - Level 1
    2020-06-01

    I just received my UltraVoice XM8500 and it seems like it maybe missing some parts but if not I dont know how to connect it!15910433928111358382249393561466.jpg

    I dont know how to connect please help it looks as if pieces might be missing

    read more...
    0 101
    • Uniquecuddles
      GaryHiggins

      @Uniquecuddles 


      All I can see is the mic and mic clip, what would be missing? Looks like you would only need a mic cable, they usually don't come with the mic. If there are other mic parts missing, it can't be seen in that photo.

      • June 1, 2020
Go to page