Statistics

254,793 members
132,524 posts
  • New
    chasermina
    Newcomer - Level 1
    2021-08-17

    What is an online radio online station? Many people hear the word radio and think it is just a simple transmission coming out of your car stereo or other device that receives an analog signal and converts it into something the radio can play. This is not always the case however. With current technological advancements, online radio services are becoming a way of life for many people.

    For a long time, public broadcasting stations were considered the only places to get quality music and programming. The analog signals were transmitted by a dedicated network, not accessible to anyone. However, over the past few decades online radio has started to become more competitive with public broadcasting. Commercial broadcasting stations must compete with online stations for public space and listener. The result is often inferior music and programs, but the goal is to provide a unique service to their audience.

    read more...
    0 24
  • New
    Craiggleason
    Newcomer - Level 1
    2021-08-17

    I can download but it will not go into Apps.....how else can I make sure my sofware is up to date and what is the latest version for Flow Software right now August 16, 2021?

    0 36
  • New
    TerryHealy
    Newcomer - Level 1
    2021-08-16

    There used to be a place where users posted and shared them???

    0 23
  • New
    SimonSimmoEliot
    Newcomer - Level 1
    2021-08-08

    I own a V-tone GMX 1200H and I am having trouble getting the amp head and FCB1010 on the same channel. I just want them both on on channel 1

    I follow all the steps in the amp and midi controller manual and the Channel number of 1 on amp still keeps flashing and number dose not go solid. It says in the manual it will stop flashing when the amp and foot switch are on the same channel and I have also went through all the steps to set the foot controller to channel 1 and the 1 on the amp does not go solid I just want to use the foot switch to call up effect patches, channel switch and effect on off control and expression pedals I basically want to use it as an effect controller for the

    V TONE on the amp head but I can’t start programming until I get both the amp head and the foot switch on the same channel and the channel number on the amp head goes solid.. plz help I’m finding it hard getting info about GMX V Tone and FCB1010 setup the user manuals are very vague. And any advice how to program the FCB1010 to be pretty much used as a pedal board to switch between FX in the head and channel switch and effect on and off and expression pedals would be great. It mentioned in the GMX V Tone manual the the FCB1010 is a great MIDI controller and channel switch and effect on and off for the FX built into the GMX 1200H V Tone.

    read more...
    0 40
  • New
    mjmnet1
    Newcomer - Level 1
    2021-07-30

    How do I import or upload pre-recorded backing tracks and download them to my Ditto+ Looper?  I've not been able to find any instructions on how to perform that task. 

    0 65
    • mjmnet1
      ChrisEdwards1 Hi mjmnet1, for the most part, this process is the same across all DITTO pedals. The only real difference in the case of the DITTO+ is how many audio files the device holds at once.

      Please see the steps below:
      1. Connect the DITTO+ to a USB port on your computer using the supplied USB cable. The display will show a progress bar, once this reaches 100% it will indicate that the DITTO+ is in USB transfer mode, and audio will be disabled.
      2. Your computer will recognize DITTO+ as an external USB storage device. It will be shown in the Finder (OS X) or Windows Explorer as a drive called “DITTO+” containing multiple folders called “TRACK1” up to "TRACK99".
      3.. Copy your audio file from your computer to DITTO+ by dragging it to the relevant “TRACK” folder of the “DITTO+” drive. Wait for the file transfer to finish.
      4. Eject/unmount DITTO+.
      5. Disconnect DITTO+ from your computer. The display will indicate it is processing and a progress bar will appear, once the bar reaches 100% the DITTO+ will restart and you should see the time of the backing track stated on the display.

      Please ensure when importing files they are of the following format:

      Wav files only:
      PCM mono 16bit @ 44.1kHz
      PCM stereo 16bit @ 44.1kHz
      PCM mono 24bit @ 44.1kHz
      PCM stereo 24Bit @ 44.1kHz
      PCM mono 32bit @ 44.1kHz
      PCM stereo 32bit @ 44.1kHz
      Float mono 32bit @ 44.1kHz
      Float stereo 32bit @ 44.1kHz
      • Jul 30
    • mjmnet1
      mjmnet1

      Thank you Chris, I really appreciate your help with this. I'll give it a shot and let you know of my success!

      • Aug 2
    • mjmnet1
      mjmnet1 Hi Chris, I sent you a message but also wanted to post here. Your advice about how to upload the tracks worked perfect. However, now I don't know how to get them to play back without overwriting them when I click the start button on the ditto+ unit. How do I get the tracks to play back so I can jam with them? Also, I seem to be able to only upload a out 10 tracks before it runs out of storage space. Is there a way to increase storage for more backing tracks? Thanks Michael
      • Aug 7
  • New
    DTSwayze
    Newcomer - Level 1
    2021-08-04

    My Ms-1 worked fine two weeks ago and when I plugged up and powered it on yesterday the led for the power barely lights up and no other led light up.


    View Video
    read more...
    0 33
    • DTSwayze
      Nigel67 Hi DTSwayze. It looks like a power supply issue that will require repair. Please submit a ticket to our Service Department and they will help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Service tab and submit a ticket. A colleague will then get back to you with an RMA number and advise the local service centre to you.
      • Aug 4
  • New
    SpockAndStepR
    Newcomer - Level 1
    2021-05-20

    I can't find it anywhere on here. I've been trying to find a way to automate any sort of parameter in my DAW to my Odyessey. the manual says "Please see the ODYSSEY section on our website for more details of the SysEx commands" but I've been looking for 2 hours and I can't find it. can someone help me out?

    read more...
    0 38
  • New
    pkk31
    Newcomer - Level 1
    2021-08-03

    Hi. Would really like to replace my BG250-112 with a 210 but it seems they aren't available anywhere. Anyone know where I can get one, please..? Cheers.

    1 27
  • New
    zoharel1964
    Newcomer - Level 1
    2021-08-02

    Hi everyone 

    I'm new to this group ,i'm trying to connect the behringer fcb1010 midi foot controller to ableton live 11 suite?   does anyone knows how does it works ? Is there a remote script for it? where can i find it and download it ? i have a macbook pro 2015 and a focusrite 6i6 sound card . 

    thanks ahead

    read more...
    0 19
  • New
    Rickmc11
    Newcomer - Level 1
    2021-07-31

    How can I run Behringer B115D active speakers with a powered mixer?

     

    0 32
    • Rickmc11
      RobbyWingfield HI Rick, Robby with Music Tribe, most powered mixers will have non- powered outputs as well. Some time these are listed a control room outs or tape outs. If you give the model of the mixer I can make a more specific recommendation
      • Jul 31
    • Rickmc11
      Rickmc11

      Thanks for the reply, Robby. It's one that I've had forever. It's a crate PCM-8 DLX. Also, how can I hook up an Xvive Audio U4 Wireless In-Ear Monitoring System to my Behringer Xenyx 1202FX Mixer with Effects, or can I? Thanks again.

      • Aug 1
Go to page